Resume - Looking for a new challenge at the end of 2003 my present contract end then

Misco Jobs

Resume #3817

CONTACT INFORMATION:
View contact information...

RESUME

Coating Inspector / Manager

Nationality: British

References will be provided on request.

TECHNICAL QUALIFICATIONS

* Certificate for Coating Technology and Inspection
* Approved British Gas E.R.S. Painting Inspector No BG12598 (Equivalent to NACE 3 USA)
* Computer skills (Word. Excel. Simage)
* R.G.I.T. Five Day Combined Fire Fighting and Survival Courses (Including Wet Helicopter)
* Full Offshore Medical-Jan 2003
* USA Working Visa L1 until 2004

EMPLOYMENT HISTORY

PETRODRILL ENGINEERING NV
SENIOR COATINGS INSPECTOR /CONSULTANT
(LOCATION PORTLAND MAINE USA.
Employed as a Coating / Insulation Manager.
Duties included managing a work force of 50 painters, attending all QA/QC' Management & safety meetings.
Surface treatment work includes blasting and power tooling.
And all tank special coatings, and outside hull Drill floor. Accommodation etc. (Jotun paints)
Galvanizing, Fire proofing, Insulating A60, Accommodation, wall and doors etc. Floating floors, and Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
For the Construction of two Semi-submersible (Amethyst Rig Project)
Start contract July 2002 (Still at this location)

PETRODRILL ENGINEERING NV
SENIOR COATINGS INSPECTOR / CONSULTANT
(LOCATION ORANGE TEXAS USA.
Employed as a coating inspector / consultant.
Duties included attending all QA/QC' Management & safety meetings.
Surface treatment work includes. Galvanizing, Fire proofing, Insulating A60 for Engine room, Accommodation, wall and doors etc. Floating floors, Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
And all tank special coatings, and outside hull. Accommodation etc. (Jotun paints)
For the Construction of Semi-submersible (Amethyst Rig Project)
Duration of contract (September 99-July 2002) Transferred to Portland Maine USA

PETRODRILL ENGINEERING NV
SENIOR COATINGS ADVISOR/INSPECTOR
(LOCATION-KOREA DAEWOO HEAVY INDUSTRIES KOJE-SI.
Employed as a coating advisor/inspector.
Duties included attending all QA/QC & safety meetings. Hands on inspection of all
Surface treatment work includes. Galvanizing, Fire proofing, Insulating A60 for Engine room, Accommodation, wall and doors etc. Floating floors, Tiling,
ICCP and EAC Anti-fouling prevention Systems. Anode arrangement for water ballast /sea chest and outside hull
And all tank special coatings, and outside hull. Accommodation etc. (Jotun paints)
For the Construction of two Semi-submersbles (Amethyst Rig Project) Brazil (Petrobras)
Duration of contract (March 99-August 2000)

HEMPEL HAI HONG- COATINGS CO LTD SHANGHAI
SENIOR COATING INSPECTOR SPECIAL COATINGS
(LOCATION- CHINA TAIZHOU JING JIANG SHIPYARD
Employed as a coating advisor for over seeing of the steel preparation
Grit blasting and the multi coatings of the cargo tanks and slop tanks
Aboard the vessel Dawyani with the coating system HEMPELS HEMPADUR 1540 epoxy (Hands on inspections)
Duration of contract (Oct 98 Jan 99)

HEMPEL HAI HONG- COATINGS CO.LTD SHANGHAI
SENIOR COATING INSPECTOR SPECIAL COATINGS
(LOCATION- CHINA WU HO JIANG DONG SHIPYARD)
Employed as a coating advisor for over seeing the blasting and
Coating of the cargo tanks and slop tanks aboard the vessel Griya Asmat
With the coating system HEMPELS hempadur 1540 epoxy (Hands on inspections)
Duration of contract (Aug 98 Oct 98

MARATHON OIL LTD. - COATING CONSULTANT
(LOCATION - SOUTH KOREA DAEWOO HEAVY INDUSTRIES YARD)
Employed on contract for the Molikpaq Modification drilling rig Sakhalin 11 Project
Duties included hands on inspection of all surface treatment work including. Galvanzing
Fire proofing. Insulating. Thermal Sprayed Aluminum.and System 2000 and all special tank Coatings and ICCP system, and controlling/advising the repair's on the old systems
Duration of contract sail away (Dec 97 till Aug 98)

BOS AUSTRALIA PYT LTD - COATING CONSULTANT
(LOCATION - SOUTH KOREA, SAMSUNG HEAVY INDUSTRIES YARD)
Employed on contract for the STAG Central Production Facility Project for Apache Energy Limited.
Duties included hands on inspection of all surface treatment work including work, which was subcontracted by SHI to lower tier subcontractors. Providing technical advice to both Apache and BOS on issues related to surface treatment. And special coatings
Duration of contract sail away (may 97 till Dec 97)

DENHOLM INDUSTRIAL SERVICES LIMITED - COATING CO-ORDINATOR
(LOCATION - PLYMOUTH: CLIENT: MINISTRY OF DEFENCE)
Employed at the Royal Navy Dockyard, Devonport. Duties included overseeing work on Royal Navy Ships, Submarines, Caisson's and Flap Gates, Dock Gates. Coating scope of work included interior and exterior using various paint systems, i.e. waterborne, solvent free etc. Surface preparation methods included open blasting and vacuum blast, checking substrate after final blast for the application of surcustic tile to submarines. Preparation of daily inspection work permits, which were checked by the M.O.D. Resigned and appointed on the STAG Production Platform in South Korea.

SALAMIS - COATING CO-ORDINATOR
(LOCATION - ODENSE - LINDO DENMARK: CLIENT: MAERSK) F.S.P.O.
Duties included inspection of hull prior to blast. Submission of reports on changes to recommended systems, monitoring of all applied coatings and recording all relevant data for future maintenance purposes. Attended meetings twice a day with QA/QC Management and Hempel representatives. End of Contract

MILLBURN SERVICES - Q. C. / SITE REPRESENTATIVE
Work included inspection of substrate in Tanks and special coatings
And related areas, Inspection of the application of Carboline recommended products recording of R.H and DFT's. Attending meetings with contractor and client on progress and quality related issues through to project completion and hand over. End of Contract

VICKERS - INDUSTRIAL FABRICATIONS INSPECTOR
Duties included inspection of various substrates prior to application of metal spray by means of gas system, using both wires and power types. Exotic metals including Aluminum: Monell: Zinc.
Equipment worked on - hydraulic prop shafts: crane units and pressure vessels.

(LOCATION - South Shields: CLIENT: AMERADA-HESS)
Project: Semi Submersible conversion work including total blast of heli-deck topsides using auto-blast system and undersides with wet-blast systems. Application of various coats systems by multi-functional crew uses a variety of application techniques depending on specification. Completed the project through to hand over.

BION LIMITED - WORKING FOREMAN
Employed on the 1989 British Gas Morecambe Bay Project Hook-up working on the D.P.3. Duties included, full application of the British Gas Systems, i.e. urethane, acrylic, coal tar epoxy, and polyester system. The work was performed to meet stringent standard of the British Gas Inspection Team.

METNOR (SWAN HUNTER SHIP BUILDER LIMITED) - FOREMAN / APPLICATOR
To oversee the smooth running of the application of zinc metal spraying to naval ships, engine rooms and engine beds prior to installation of machinery and instruments.

RIGIDON OFFSHORE LIMITED (NINIAN FIELD NORTH SEA) - FOREMAN / APPLICATOR
To oversee and assist in the application of glass flake polyester system to the internals of six offshore production separators of various sizes. Work included, grit blasting to S.A.2.5, application of a holding primer, trowel application of glass flake with an overall thickness of 3.5mm. After cure, conducting spark test to ensure the integrity of the system prior to hand over and re-introduction to service.

MANERSMAN G.M.B.H. (SUB-CONTRACTED TO BRITISH GAS) –
COATING TECHNICIAN
The Project involved the laying of a 36² gas pipeline from Scotland through to England, after three days training in Germany on the application of fusion blinded Epoxy (F.B.E.), through a jacket and heat induction unit. I worked on this Project for five months, applying the system to all the pipe lengths, joints and valve tie-ins.

TYNE DOCK ENGINEERING - SPRAYER
Duties included the preparation of the surfaces by mechanical and blasting techniques, depending on client's specifications. Application by airless and conventional spraying methods i.e. zinc silicate, epoxies and various coating system finishes. All work was carried out under full client inspection. End of Contract

BARRIER COATING LIMITED (U.K.) - BLASTER / SPRAYER
During my time with Barrier, I worked on various Projects for different client's e.g. SHELL, CONOCO, and BRITOIL. My work moved from blasting pipework and support steel in a blast chamber, internal work through to final hand over.

TYNE DOCK ENGINEERING (U.K.) - INSPECTOR
Work included checking and recording of substrate profile, WFT, DFT and RH on various projects including tankers, container and cargo vessels. During my time with this organization. I was responsible to oversee that the main contractor carried out all works to the required spec. This work involved blast and application of various coatings to ships hulls, tanks, double bottoms and side tanks including forward and after peeks, saddle tanks, water ballast tanks and holds etc. This position was closed due to a short fall in the number of contractors.

BECHTEL: SONATRACH - INSPECTOR / SUPERVISOR
Algeria, North Africa G.M.E. 48² Gas Pipeline 530 Kilometers total length. Materials - Protocol U.T.32.10.R applied up to 4mil in thickness. Work on main line field joints, including the terminal and block valves the project required me to learn various new skills in order to operate high-tech eqpt that was deployed on site to apply the above named product.

PILELINE PROTECTION LIMITED (NORTH EAST ENGLAND) - INSPECTOR
Work included inspection of substrate condition prior to application of Bitumastic Coating to internal and external areas of 24² to 36² Pipe Spools. Recording D.F.T.'s and carrying Q.A. checks prior to release.

PIPELINE INDUCTION HEAT - INSPECTOR
CLIENT - STATOIL
Work included inspection of fusion bonded Epoxy Coatings, surface profile / surface cleanliness, metal temperature control (using temperature indication crayons), and elastometric spacers using polyurethane Injection and finished with Servowrap.

INTERNATIONAL MARINE COATINGS - INSPECTOR / SITE REPRESENTATIVE
During this period, I was responsible for traveling around the U.K. completing small contracts for ship repair yards. This involved inspection of various coating systems to pipes decks and tanks. I left this position due to new management take over.

DEBRA COATING LIMITED (NINIAN FIELD: NORTH SEA) –
COATINGS SUPERVISOR
Application of new non-skid walkway system to all walkways, internal and external to the Ninian Central Production Platform. Work included Supervision of labour / Q.C. / ordering of materials / client to contractor meetings on progress through to hand over.

BABCOCK GERMANY (LOCATION: BRUNIBUTTLE) –
INSPECTOR / SUPERVISOR
Working under sub-contract to Babcocks in the Bayer Chemical Plant extension project. This consisted of supervision of labour force at all levels / client, contractor inspections, reporting, ordering of materials and scaffolding for various site locations on the plant for various structures.

SALAMIS (ON SHORE AND OFF SHORE) - BLASTER / SPRAYER
During my time with Salamis, I worked on various contract, including semi-subs moored at Peterhead, usually leg and pontoon areas being blasted to varying standards, depending on Client Specification: Re-coat with anti-fowling or various low permeability systems. Mud Rooms, full blast and coat with coal tar Epoxy. T.L.P. Project working in blasting was to S.A.2.5. Clean off and after Client Inspection, one coat of Inorganic-zinc Silicate.

I.M.C HARLAND AND WOLF IRELAND (DRY DOCK) - SPRAYER / APPLICATOR
Ship types include - Tankers: Bulk Carriers and Cargo Vessels. Application of coating products to all areas: internal and external tanks holds: Engine Rooms: saddles and tanks: double bottoms: decorative work to accommodation of all type of coating including, Alkyd Coal-tar flame retardant two pack paints: anti-fowling S.P.C.

MIDDLE DOCKS ENGINEERING - APPRENTICE PAINTER
Duties included - all types of painting, spraying and water blasting. I was also trained to strip down and replace worn parts of the high-pressure graco airless spray units and guns. I was made redundant due to the closure of the Yard.

Salary, Negotiable
Plus expenses
Transportation
Accommodation
Vacation plus travel Expenses
Per Dim
All Negotiable

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 3123)

Go to Search Parameters...

Brief Description

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Erection, Commissioning field instruments & Systems

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

Piping Design using CadWorx, Smart plant Review. Construction General Foreman

3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.

Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Diploma of Associate Engineer in Civil Technology

I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering

I finished in diploma in Architecture, master diploma in architecture cadd

I have 4 years experience exclusively as a safety and Security professional. Presently working with Technical & Trading Establishment (Technical Division of Easa Saleh Al Gurg Group) as a Health & Safety Officer. As far as my Education is concerned, I Have Completed my Diploma in Mechanical Engineer

I have more than 14 years expertness in construction and 6 years in LNG and oil and last project for me was in Sakhalin I work there more than 2 years

Proficient in Microsoft Office suite (Word, Excel, PowerPoint) and AutoCAD

I have worked as an Associate RF Engineer where my responsibilities were . Post & Pre Drives, Single site verification, hand off, call dropping, blocked calls, signal level, and frequency scanning . Used Delorme Streets & Atlas for route determination & navigation.

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

I am an Instrumentation Supervisor with a large experience in oil and gas projects, I have worked many years for importants companies in Brasil, Saudi Arabia, UAE, Mexico and USA.

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out