Resume - Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial ...

Misco Jobs

Resume #38339

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I am a Licensed Master Electrician and have 28 years of work experience. I worked at the Potlatch paper mill in Brainerd for 18 years, 15 of them as an industrial electrician. The mill was purchased and closed by another paper company in order to drive up the price of the grades of paper we made. I had started my own electrical contracting company several years before the plant closed and have been doing this for 7 years. I enjoy large and technically challenging projects. Now that my family is grown I have no problem with travel. My last large project I lived in my motorhome for 8 months. I am looking for a large project that involves travel.

WORK EXPERIENCE
Owner, Project Manager
5/2002 - Present Engisch Electric, Brainerd, MN
Own and operate electrical contracting buisness. Most recent large job wasmoving a blow molding factory from Riverton, MN to Watertown, SD. This project invvolved moving 28 blow molding presses and all the secondary equipment about 300 miles. Each press was individually PLC controlled and had to have programming saved and reloaded. The presses had to be unwired and disassembled into component sections, the rewired and erected at the new plant in Watertown. The old plant in Riverton had to have all the 480 volt machine feeds removed and pass electrical inspection on completion.My company had also automated 12 protype machines over the past 4 years with Allen Bradley PLCs And Panelviews, we provided setup and training for the maintence staff at the new plant. These were automated finishing machines for Polaris, Yamaha, Kubota and Kawasaki. I personally did all the electrical design and programming of these machines and my son and I wired them. They are all in full production and have replaced 15 to20 production line workers. The finished product quality is superior to hand labor.We had also done all electrical, PLC and VFD work for this plant for the past 4 years. My crew worked 85 hours per week for eight months. The CEO of the company bought me dinner and thanked me personally for doing an excellent job and staying on budget. The project as a whole went 8 million over.

EDUCATION
8/1978 - 6/1980 St. Cloud AVTI, St. Cloud, MN
Degrees and Certificates:
2 Year Instrumentation degree
Master Electrician license
Contractor license
Formal Allen Bradley PLC traing
Formal Allen Bradley drive training
Formal Reliance drive training
Formal PLC network training

SKILLS INCLUDE:
Electrical layout, design, troubleshooting, installation.
Instrument layout, design, troubleshooting, installation.
PLC programming, program modification and tuning, layout and instalation.
Power distribution, MCCs, Drives and control equipment both high and low voltage.
Welding and cutting, Mechanical skills.
Hydraulics and pneumatics.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 2815)

Go to Search Parameters...

Brief Description

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

have skills and knowledge in science information technology and industrial engineering.

Mechanical Enginner with two years experience in designs for commercial, domestic and retail buildings specialising in HVAC, water supply and waste reticulation.

Engineering experience of construction projects; piping system and water resources

Experienced equipment manager with earthmoving, material handling equipment, and cranes.

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Geotechnical Engineer working in design, planning, technical follow, contract administration, reporting, financial studies and cost control of underground works such as DW, Piles, Grouting, Tunnelling, Dewatering.

Onshore drilling HSE Advisor

I am currently transitioning out of the U.S. Army. During this time, I have acquired extensive knowledge of electronics and electronic systems

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

Structural design

I have 8+ years in surveying including construction, boundary, topo, ALTA, environmental, and other special surveys. I have managed and trained field crews. I am proficient with GPS and robotic total stations. I have experience with CarlsonSurv2007, AutoCad LDD 2002-2006, LGO, and TGO.

I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic

Quantity surveying and set work shop drawing

Field service, strong troubleshooting skills, electrical/electronic

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Mechanical Engineer with 3 years of experience in electrical instalations

Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Experience in Construction of Power House, Highway Roads, Highrise Buildings, Canals, Air Ports, Aero Bridge, Delhi Metro Rail, Commercial and Residential Multi Story Buildings, Water Tank, Guest House, Domes. Familiar with ISO 9001, ISO 14001 and Safety systems.

Recently I have completed a BSc. in Mechanical Engineering at the Near East University, graduating in 2008, Cyprus.

Fresh Graduate. Civil Engineer. Interested in construction management and structural enginnering.

Proe, autocad.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Reinforced Concrete, Steelwork, Structural Timber, 3D structural Modelling

Chemical Process Engineer,Simulation Design, Process Control Automation,Project Development-Conceptual,Feasibility,FEED,Project Mgr,Coordination_EPC,PMC,Licensor,investors;techno economic financial analysis,Mid Downstream Refining, Petrochemicals,Gas Processing/Treatment,Q-HSE,Business Head (P&L)

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

AutoCAD Operator

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

Over 7 years of overall experience

B.E MECHANICAL(2007/76%/Skills in-AutoCAD,Pro-E,catia-V5,very good seminar & demonstrative

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out