Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #39153 next resume »»
CONTACT INFORMATION:
View contact information...

SPECIALISATION
Industrial Concrete & Steel Structural analysis & design, foundations, concrete rehabilitation, explosion venting
Countries willing to work - Open

LANGUAGES English, Gujrati, Urdu, some Arabic

SKILLS
Civil Engineering: Analysis, design, construction and repair of reinforced concrete and steel structures.
Computers: Fluency in AutoCAD 2002, STAAD Pro, Mathcad, SAFE, MS Office, MS Project, Programming experience in dBase, Excel, developed several analysis & design aid modules.

EDUCATIONAL AND PROFESSIONAL STATUS
- B.Sc. (Hons) Civil Engineering, 1982: University of Aston, Birmingham, UK
- PE (Wisconsin, USA). Accredited: CCPE, Ottawa, Canada
- Professional Engineer, Pakistan Engineering Council
- Past Member, Instt. of Civil Engineers, UK.

EXPERIENCE RECORD
Aug '01 – present Sargent & Lundy LLC – Consulting Engineers, Chicago IL
Senior Structural Engineer, Fossil Fuel & Nuclear Power
Power Station structural design, inspections: retrofit to coal-fired to reduce NOx emissions:
- Marion (IL) Units 4,5&6: re-designed piled foundations SCR reactor supports to eliminate costly shear walls.
- Coffeen (IN): Retrofit for new air intake ducts, check & modify in-place steel for duct bumpers and supports, new truss retrofit for ash pipe.
- Gibson (IN) Units 2,3,4&5: New SCR units retrofit to existing station - achieved significant cost savings for Client thru critical structural analysis of existing structure.
- Poletti, (NY) 500 MW CCPP: principal design reviewer for civil / structural works, including construction support. Reviewed and altered numerous design and construction issues, achieved very few issues during support phase.
- Tennessee Valley Authority at Benton & Lowndes (TN): transmission substation structures & foundations - developed degree of automation & "off-the-shelf approach", for design cost savings.
- Marion (IL) inspection of corrugated steel circulating water lines, report & recommended shotcrete lining.
- Bellingham (MA): Assessment of crane girder built to defective calculations - satisfied client of girder safety.
- Dallman (IN): inspection of main air inlet ducts from ID fans to chimney.
- Sioux (IN): preliminary piling layout, achieved efficient layout despite headroom constrains
- Edwards (IL): designed explosion relief siding & blast protection for occupied areas
- Monticello (MN): nuclear power plant, evaluated cores thru reactor building.
- Fort Calhoun (NE): nuclear power plant, modifications for 100 Ton condenser tube bundle replacement & Turbine Building crane upgrade
- Baldwin (IL): rigging beams for HRH Pipe replacement,
- Vermilion (IL) - explosion venting, brick wall protection

Sept '88 – May '00 MOTT MACDONALD GROUP – Consulting Engineers (Incorporating Ewbank Preece Limited)
Resident structural engineer & incharge of CAD (Drafting) section:
Concept, design and detailing of:
- Desalination & power generation plant foundations and process / control buildings at 6 sites for U.A.E. Ministry of Electricity & Water.
- Pipe rack support systems for Oil Company, fuel tank bases, gantries
- Manholes, pits, trenches & culverts (single, 2-bore & 4-bore, and stop logs)
- Thrust blocks & valve chambers for buried pipelines
- Telecom company high-rise flagship buildings in Abu Dhabi, Sharjah and Al Ain
- Chicago Beach Hotel periphery buildings (pre-cast concrete)
- General foundations for petrochemical plant (skids & ancillaries)
- Flare & chimney foundations
- 33 kV & 11 kV overhead electricity transmission line poles including foundation using kicker poles
- Substation buildings (220 – 33 kV)
- Precast flooring for Duty Free Warehouse and GSE Complex at Dubai International Airport

Design & site supervision of:
- Telecom tower piled foundations & structure – approx 50 sites
- Gas Turbine installations (3 sites)
- Fuel storage tanks ; shell & ring foundations
- Telecom switchgear buildings (6 sites)

Design checks for:
- Telecom towers, masts & monopoles: upto 200m, over 150 sites, check for structure & foundations
(piles, pads & rafts)
- Overhead Transmission Line tower foundations for various Govt. projects.
- Flare installation technique

Structural concrete surveys & special projects:
- Crack investigations and delamination mappings of trenches, foundations, slabs, etc. Concrete deterioration survey involving potential surveys, dust & core sampling
- Site supervision of remedial works including skin repairs, surface improvement techniques and cost-control., structural analysis of cracked concrete sections for tanks at petroleum installations, control building, exhaust stack foundation.
- Site survey & "As-built" drawings for Aluminium smelter expansion, new Flour Mill, recreation club, Sea Port expansion
- Special investigation for tower failure – testing, analysis & report
- Damage investigation for culvert due to accidental loads, developed computer model of incident.

Sept '88 – May '00 (additional freelance work)
Engineering support: design & detailing of hotel, pre-cast units, bar bending schedules, sub-frame design, foundations. Produced drawings for fire-fighting systems, drainage, plumbing & HVAC layouts.
Production & alteration of drawings for road alignments, interchanges, and housing development layouts.

Oct 87 - Sep 88 ELECTRICAL ENGINEERING CENTRE, Doha, Qatar: Consulting Engineers
Drawing & document production related to electrical contracting works involving electrical cable laying & HV / LV panels.

Jan 85 - Sep 87 ALI ZAIN CONSTRUCTION, Karachi, Pakistan: Civil Contractors
Site Engineer - site supervision for steel re-rolling mill project (steel portal & rc machine foundations),
Motor showroom (rc flat-slab), and 65 low-cost housing units. Responsible for all aspects of construction,
Cost control and sub-contractor payments.

Sep 84 - Dec 84 DESIGN CENTRE, Karachi, Pakistan
Structural Designer - designing and drafting of R.C. structures including mosques, office buildings and shopping centres.

Jun 83 - Aug 84 (Freelance Engineer), Telford, U.K.
Surveying, setting out and supervision of various residential and commercial building sites.

Aug 82 - Jun 83 & Apr 81 – Sep 81 MCPHILLIPS LTD., Telford, UK, Civil Contractors
Junior Site Engineer: Setting out, surveying, site management of road, pipeline, earthmoving.

Apr 80 - Sep 80 JEC FAREBROTHER & PARTNERS, Birmingham UK, Consulting Engineers
Apr 79 - Sep 79 (University Sandwich Course Work Experience)
Junior Design Engineer: design & detailing of R.C. and steelwork structures. Site supervision work.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1051 to 1100 of 3088)Go to Search Parameters...
Brief Description
Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.
Senior Planning Engineer well versed with Primavera, Suretrack, MS Project
Technical office Manager.
Urban Roads and Highway design, Traffic and Transportation planning
Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination
Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division
multi skilled engineer
To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system
TO WORK AS A HVAC SALES MANAGER IN A CHALLENGING HVAC INDUSTRY.
International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT
Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes
7 YEARS OF RIGGER EXPERIENCE
Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/
Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management
KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si
Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects
To secure a challenging position with a dynamic organization which will enable me to apply my education and creative skills to the benefit of the organization?
Planning Engineer, Certificate of degree Dr. of Philosophy
Professional graduate engineer experienced in Facilities Management, CMMS implementation and application, Technical Writing. Recent 16 months in Kazakhstan. Interested in contract work (rotational or short-term)
I am a Mechanical Engineer with around 9 years of experince, with knowledge in construction project manage. Desing of wellhead equipment, and drilling equipment, certified in none destructive examination.
I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh
15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar
Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project
Experience in quantity surveying, site supervision, planning, designing over water and over land structures.
I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.
Looking for a position with an established engineering company, utilizing previously learned skills
I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.
Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.
I have bachelors in mechanical Engineering and Masters in Petroleum Engineering.I have working Experience in Pipe line and EPC Companies
MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.
Mechanical Draughtsman (AutoCAD,AutoCAD Inventor.)
responsible for the day-to-day operation and control of a CISCO based communications network.
Estimation and Costing,variationsnad claims,Monthly Progressive Bill preparations
A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms
More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry
Rotational Power Infrastructure Manager & International Quality and Safety Systems Management
Civil Engineer, Civil maritime engineer
Computer ?Automation & Controls Engineer
PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings
I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin
Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.
Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries
14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.
Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations
Mechanical Design Engineer with 3 years experience in sheet metal and plastic designs.
Diploma in industrial automation
As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.
Electrical Engineering Manager/ Project Manager
Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management
Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   [ 22 ]   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com