Resume - NACE Certified Coating Inspector #7278, with +20 years of experience, available ...

Misco Jobs

Resume #4017

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Languages: Dutch, English and German.

Education: MBO-Royal Dutch Navy Engineer.

Computer skills: MS-office

Certificates: NACE Certified Coating Inspector #
7278.

Nationality: Dutch

Training: NACE CIP course session I, II, III
and Peer review.
: Ameron training course on corrosion and corrosion control, and annual training on new products and techniques (incl. discussions on coatings in general).
: Course on application and inspection of fire proofing materials-Mandoval.
: Plural component pump application
Baytec-Germany.
: Insurance Inspector indemnity claims.
: Various courses Royal Dutch Navy.

Professional Membership: NACE - National Association of
Corrosion Engineers

Mobility: Single International Mobile,
Rotational, Hardship Location,

Summary of Experience

: Twenty years Coating Manufacturer's Representative as Senior Field Service
Engineer.
Coating Consultant/Inspector in surface preparation, coating application and specifying.
Fireproofing Inspector.

: Fully conversant with a diversified range of coatings, paints, paint techniques, and special coatings such as; Spray Applied Coatings, Reinforced
Linings, Metallizing, Fireproof Coatings, Plural Component Spray, Shop
Painting, Thick Floor Toppings, Cement Coatings, Inorganic Zinc Silicates, et cétera.
: (Mega) Yacht Coatings for various owners (Fairing and Finish Coatings)

Employers

2002 – present: Freelance (3rd party) Coating Inspector
Coating Consultant
Coating Surveyor
Coating Supervisor
Vendor Surveillance

1982 - 2001: Ameron International BV, Netherlands
Protective Coatings Group
Senior Field Service Engineer

1980 - 1982: Nationale Nederlanden, Netherlands
Insurance Inspector Technical aspects

1972 - 1979: Saybolt van Duyn, Netherlands & Italy
Cargo Inspector Mineral Oils

1970 - 1971: Smit International, Netherlands
Salvage Engineer

1964 - 1970: Royal Dutch Navy
Gunfire Control Engineer

Employers and work experience

Freelance: Coating Inspection/Supervision, Fire Proofing
Inspection on refineries, chemical plants, ships, mega yachts, etc.

Ameron International: Manufacturers Technical Representative/Coating
Inspector and Coating Surveyor - on offshore, onshore
& marine structures in Europe, Africa, Middle & Far
East and C.I.S countries.
Working also as a coating specialist in training people for surface preparation and coating application in the Industry in general.

Nationale Nederlanden: Insurance Inspector technical aspects-
inspection of buildings and other objects on fire prevention for acceptance, and handling indemnity claims.

Saybolt van Duyn: Gargo Inspector - to control the quality &
quantity during loading and discharging of mineral oils.
Smit International: Salvage Engineer and Runner - to assist with salvaging vessels and to be co- responsible for the floating object to be towed.

Royal Dutch Navy: Radar Operator Gun Fire Control- to locate and eliminate the Target by gunfire.

Quality Control coating inspection and Consultancy on new buildings (bi-weekly visits)
Pennzoil offshore platforms - Netherlands.
Unocal offshore platform - Netherlands.
Danbor Gas Development offshore platform - Netherlands.
Elf Aquitaine living quarter - France.
Elf Rospomare offshore platform - Italy.
Micoperi spools - Netherlands.
NATO jetty piles - Sicily, Italy.
Norsk Hydro-Netherlands and Poland.
Vekoma roller coasters for Disney World - Netherlands.
Shell Auger and Mars/Tension Leg Platforms Hull construction - Italy.
Jetty piles N.I.O.C.- Bandar Abbas, Iran.
Shell Hycon Complex - Netherlands.
ABB Power station's - Libya, Abu Dhabi.
Statoil Karsto Gas terminal Haugesund - Norway.
Iritec/N.I.O.C. storage buildings - Tehran, Iran.
British Gas Armada offshore project - Scotland, U.K.
Siemens Power Station - India.
Al Taweelah B - Abu Dhabi.
Mooring Buoys NPCC, Noel Imac - Abu Dhabi
Gamesa Windmills - Spain
London Underground Line (LUL) - U.K.
Tekol Maribor Nuclear Power station - Slovenia.
Bluewater FPSO 'Bleo Holm - Scotland, U.K.
Road Bridges Polish Government - Poland.
NEM Power Station's (USA) – Hungary.
Leuna 2000 refinery - Germany
AFR railcar decks and train boogies Euro tunnel - France.
Great Made Man River Project GMRA concrete PCC piping - Libya.
Windmills various owners - Germany
(Mega)Yacht New Buildings - Various Owners Worldwide

Quality Control coating inspection maintenance
McDermott platforms-Belgium.
Petroland offshore-Northsea.
Placid Oil offshore-North sea.
Carlsberg Malt plant-Denmark
Global Houston 4x offshore drilling platforms-Gabon.
Leuna 2000 refinery-Germany.
Heerema crane ship "Balder"-Rozenburg, Netherlands.

Full time Quality Control Inspection and Supervision

1985-1986
Client - Phillips Petroleum - Mannesmann, Netherlands.
Project - Ekofisk Platforms 2/4K total rehab job.
Duties - Coating Inspector, Architectural Inspector, Fire Proofing Inspector,
- Insulation Inspector.

1988-1991
Client - Napetco-Marsa El Brega,Libya
Project - Maintenance on a running- fertilizer plant (340.000 m2)
Duties - Lead Coating Inspector leading the Q.C. Coating Department.
- Coating Consultant

1992
Client - Sirte Oil Company, Marsa El Brega, Libya
Project - Recoating of the bottom of an 80 mtr. dia. Crude Oil Storage tank with a glass mat reinforced coating system.
Duties - Coating Inspector
- Coating Consultant

1993, 1994 and 1995
Client - Veba Oil Operations-RasLanuf, Libya
Project - Recoating of (3x) 80 mtr. dia. Crude Oil Storage tanks
(internal and external) Contractor MAN – Germany.
Duties - Senior Coating Inspector
- Coating Consultant

1995/1996/1997/1998 (during summertime only)
Client - Neftygaz-Neftyugansk (West Siberia), Russia
Project - Rehab of 70 Crude Oil Storage tanks (440.000 2m)
Duties - Senior Coating Inspector/Supervisor
- Coating and Quality Consultant

2002 September-2003 April
Client - Dubai Ports Authorities - Dubai, UAE
Project - Platinum Mega Yacht new building (160 mtrs)
Duties - Senior Coating Inspector

2003 May-present
Client - MW Kellogg Engineering Ltd
Project - NC2X Revamp Fina Antwerp Olefins Refinery - Belgium
Duties - Coating Inspector/Supervisor
- Fire Proofing Inspector

Corrosion Surveys a.o.
Agip offshore 2x offshore production platforms Bouri Field-Libya.
API mooring platforms-Italy.
Global Houston 4x offshore drilling platforms-Gabon.
Petroland offshore-North sea.
Placid Oil offshore-North sea.
(Mega) Yachts – Worldwide.

Tank coatings and linings, new building/maintenance, coating inspection, corrosion survey (incl.glassmat reinforced) inorganic/organic at NATO, Vopak, Oiltanking, Carbon Black, Shell, Exxon, Elf, Veba Oil - Ras Lanuf, Sirte Oil Company - Marsa El Brega, Agoco - Bengazi, Kuwait Oil Company, ADNOC-Fod., Neftygaz and Lukoil in Russia, Europe, Africa, Middle East.

Marine
For various ship owners such as Stolt Nielsen, Atlantska Plovidba, Jo Tankers, Barber, Royal Dutch Navy, Odfjell SA, ITM ship management-Dubai, etc.- tank linings, hull coatings, corrosion survey, maintenance and new building quality control in Europe, Ukraine, and Middle & Far East.

Yacht Coating Services
Inspection of surface preparation, Fairing and Yacht finish application on new buildings and refits on (mega) yachts up to 160 meter for various yacht owners, reporting to the yacht management.

Coating Inspection for Insurance Companies
Various coating inspection jobs on commercial ship new buildings and (Mega) Yachts - ballast tanks, cargo tanks and holds and hull, reporting to the insurance companies.

Product development
As Senior Field Service Engineer involved with field development of a.o. a Polyurea Coating as tested in the U.S.A., Netherlands and Saudi Arabia.

Trouble shooting
As Senior Field Service Engineer involved in handling and solving coating problems of various nature to the satisfaction of the customers.

Reporting
All the above-mentioned activities have been reported in detail to the customers in the English language.

International Standards
Familiar with international coating standards like; D.I.N., ISO, N.A.C.E., S.S.P.C., etc. including Yacht Finish Standards.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 3125)

Go to Search Parameters...

Brief Description

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Erection, Commissioning field instruments & Systems

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

Piping Design using CadWorx, Smart plant Review. Construction General Foreman

3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.

Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Diploma of Associate Engineer in Civil Technology

I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering

I finished in diploma in Architecture, master diploma in architecture cadd

I have 4 years experience exclusively as a safety and Security professional. Presently working with Technical & Trading Establishment (Technical Division of Easa Saleh Al Gurg Group) as a Health & Safety Officer. As far as my Education is concerned, I Have Completed my Diploma in Mechanical Engineer

I have more than 14 years expertness in construction and 6 years in LNG and oil and last project for me was in Sakhalin I work there more than 2 years

Proficient in Microsoft Office suite (Word, Excel, PowerPoint) and AutoCAD

I have worked as an Associate RF Engineer where my responsibilities were . Post & Pre Drives, Single site verification, hand off, call dropping, blocked calls, signal level, and frequency scanning . Used Delorme Streets & Atlas for route determination & navigation.

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

I am an Instrumentation Supervisor with a large experience in oil and gas projects, I have worked many years for importants companies in Brasil, Saudi Arabia, UAE, Mexico and USA.

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out