Resume - Mechanical Engineer, Project Engineer and Project Management Services

Misco Jobs

Resume #40809

CONTACT INFORMATION:
View contact information...

OJECTIVE:
There is a will, there is a way. For every job and company, my expecting is to be a Professional Engineer, learn and to do more also get better benefits.

EDUCATIONAL:
1986 - 1991 Brawijaya University
Malang, Jawa Timur
Mechanical Engineering Department
BS., Mechanical Engineering

PROFESSIONAL EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group)
Semarang, Jawa Tengah
Staff of Production and Maintenance Section

1993 - 2003 PT. Boma Bisma Indra
Surabaya, Jawa Timur
Staff of Technology Directorate PT BBI
- Mechanical Engineer - Balance of Plant Section
Staff of Project Management and Services Division PT. BBI
- Mechanical Engineer - Engineering Services Section

2003 - Present PT. Cemara Siko Engineering Indonesia
Jakarta
Senior Mechanical Engineer - Engineering Department

WORK EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group), Staff of Production and Maintenance Section.
Responsibilities:
- Processing of liquefied gas: oxygen, nitrogen and argon
- Maintenance of gas equipment and cryogenic equipment
- Design of piping gas distribution system and preparation bill of quantity.

1994 PT. BBI, Member of Engineering team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Design of piping isometric and pipe supports.

1994 - 1995 PT. BBI, Member of Commissioning team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Commissioning of Gas Turbine forced cooling system and Gas turbine lube cooling system.
- Commissioning of Fuel oil and Fuel gas supply system.
- Commissioning of Desalination Plant and Service water system.
- Commissioning of Demineralized water system and Boiler feed water system.
- Commissioning of Condensate water system and Circulating water system.
- Commissioning of Condenser tube cleaning system and Closed cooling water system.

1996 - 1997 Member of Engineering team for mechanical design of pressure vessels and heat exchangers.
Responsibilities:
- Preparation of Strength calculation and Bill quantity of material of pressure vessels and heat exchangers for bidding.
- Mechanical design of pressure vessels for TPPC project.
- Mechanical design of pressure vessel for Smelter cooper project.
- Preparation Mechanical design of HE for Cilacap Debottlenecking project.
- Preparation of plant lay outing and bill quantity of material for bidding.

1997 - 1998 PT. BBI, Member of Engineering team BBI - BPIS for BOP Term of reference project TA. 1997 / 1998.
Responsibilities:
- Engineering coordinator of mechanical design of circulating water system.
- Mechanical design of circulating water piping.

1998 - 1999 PT. BBI, Member of Engineering team BBI - BATAN for RUT VI.
Responsibilities:
- Design, research and development of small condenser 1 MW capacity.
- Preparation thermal calculation of small condenser 1 MW capacity.

1999 - 2000 PT. BBI, Member of Technology development team for Transfer of Technology CPO Mill design.
Responsibilities:
- Transfer of Technology for Overall Design of CPO mill 30 MT / hr capacity.
- Thermal analysis of CPO mill equipment ( Sterilizer, Clarifier etc ).
- Heat and Mass balance analysis of CPO mill 30 MT / hr capacity.
- Mechanical design for CPO Mill capacity 10 MT/ hr extendable to 30 MT / hr, Trumon, Project.

2000 - 2001 PT. BBI, Mechanical Engineer for CPO Mill PT. SAL-2 Jambi Project
Responsibilities:
- Leader of Mechanical design PT. BBI for Extension Works of CPO Mill 30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.
- Preparation plant arrangement, Equipment design and preparation equipment specification.
- Site Engineer for CPO Mill PT. SAL - 2 Project
- Responsibilities:
- To provide instruction sheet and supervise during modification and installation of equipment CPO Mill30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.

2001 - 2002 PT. BBI, Mechanical Engineer for CPO Mill PT. KLS Project.
Responsibilities:
- Leader of Mechanical design for CPO Mill capacity 30 MT/ hr extendable to 60 MT / hr, PT. KLS Project and preparation equipment technical specifications.

2002 - 2003 PT. BBI, Engineering Manager for Turnkey project of JSPO Palm oil mill 90 Ton FFB / hr capacity.
Responsibilities:
- To coordinate all engineering activities such as prepare engineering drawing, Technical specifications, bill of quantity etc.

2003 - 2004 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for RioTuba Nickel HPP Project, PT. MAP Indonesia and PT SMU Project
Responsibilities:
- Mechanical design for shake out machine.
- Mechanical design for rotary kiln, and piping system.
- Supervising Fabrication of RioTuba Equipments: Hopper, Belt conveyors, Shake out machine.
- Supervising Fabrication of PT SMU Equipments: retort dryer and roasting kiln.

2004 - 2005 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for Fe-Ni Smelting Plant N0.3 Pomalaa Project.
Responsibilities:
- Mechanical Design of Material Handling System: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Material Handling Equipments: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Hot air generator, water cooling system for furnace.

2005 PT. Cemara Siko Engineering Indonesia, Fabrication Manager for SAK II Poject, Sinapore.
Responsibilities:
- To coordinate and planning fabrication drum and vessel, progress control, to arrange and inspection between client and vendor.

PT. Cemara Siko Engineering Indonesia, Engineering Manager for Komatsu foundry expansion project.
Responsibilities:
- To coordinate Engineering documentation, provide bill of quantity and to expedite technical communication with vendor.

PT. Cemara Siko Engineering Indonesia, Site Engineer for Komatsu foundry expansion project.
Responsibilities:
- Supervising Fabrication of dust collecting system, installation of dust collecting system and furnace system.

2005 - Present PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for:
- Preparation of Cost Estimation for ITC Alumina calcining Plant project.

- Preparation of Cost Estimation for hydrant piping system PT TEL pulp and paper.

- Preparation of Cost Estimation for Incinerators equipment Yuasa Industries Co, Ltd.

- Preparation of strength calculation for thickener of Aluminum Hydroxide Plant Project, Korea General Chemical Corporation.

ACHIEVEMENT / TRAINING:
1995 Certificate of merit from Sobelco SA, Management site, Belawan, North Sumatra.
- Mechanical Commissioning Engineer PT. BBI.

1997 DJLPE - IWPL Training
Training for piping and equipment design and lay outing.
- Piping and equipment lay outing for power plant, calculation and material selection of piping for power plant.

1999 AOTS - ALTP Training
Training for equipment design improvement
- Design of HP and LP Heat exchanger for Power plant.

2000 CSIPMS Training
Training for CPO Mill design.
- Overall design of CPO mill, Heat and mass balance, Thermal calculation of cpo mill equipment, lay outing and calculation of effluent treatment plant.

2004 PT. Cemara Siko Engineering Indonesia Tokyo Branch Office, Transfer of Technology Program for equipment of Fe-Ni project.

EXPERTISE AND COMPETENCES:

Computer application:
- MS Office
- HTFS D301 for Mechanical design of heat exchangers
- HTFS D301 for Thermal design of heat exchangers.
- CAE pipe ver 3.7 rev.1 for pipe strength calculation and stress analysis.
- Autoplant R5.0 for plant lay outing design.

Mechanical Engineering:
- Mechanical design of heat exchangers according to TEMA Standard.
- Mechanical design of pressure vessels according to ASME Code.
- Mechanical design of Belt Feeder, Belt Conveyor and Shuttle Conveyor.
- Project Engineer.

Languages:
- Indonesia
- English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2821)

Go to Search Parameters...

Brief Description

B.E. in Electrical, having basic knowledge in Embedded Systems, Robotics, Matlab, Simulink, Autocad, C++

EDUCATION: „h Govt. Polytechnic, Rajkot D.E. (Civil) WORK EXPERIENCE: „h 6 Year experience as a Site In charge (Construction Project) at Backbone Enterprises Limited, Ahmedabad

Civil Construction & Contracts Manager

Experitse in geophysical surveys, geotechnical, hydrogeological investigations, environmental and engineering applications as well as software development using VB.

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Instrument Engineer / Supt

MECHANICAL ENGINEER WITH 2+YRS OFFSHORE EXPERIENCE IN SUBSEA PIPE LAYING,TIE IN AND RISER INSTALLATION,SBM AND PIPING INSTALLATION

Working as Engineer involved in Design and Commissioning of PLC/DCS Panels & logics and HMI/SCADA systems and Customize Reports. Engineering on multiple communication networks and protocols.

A mechanical design engineer, experienced in prototype packaging, embedded systems programming, optical integration, cryogenic environments.

A Senior Land Surveyor/ Data Manager with 17 years experience on large infrastructural projects. Diverse 3D mapping and engineering experience using MicroStation, AutoCAD, MX, InRoads and Surveying software packages. A provider of survey, design and CAD support services for tenders and projects.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Objective: To obtain a challenging PDMS / PDS piping designer position in energy industry.

PRO-E DESIGN ENGINEER

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

Systems Engineer, Catia, Solidworks, stress calulations

piping design, supervision on large projects, estimating/cost and budget control

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Sr. Project Controls Specialist

Cad Engineer

Telecom,telecommunication,engineer,engineering,communication,telecom and IT,WIRELESS COMMUNICATION,OPTICAL FIBER

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

Project Engineer, 3 years experience, previously a shop detailer, very competent in StruCad and Autocad. Have worked in remote location, on a 4 & 1 FIFO roster on night shift

Excellent theoretical and practical command of planning, performing, evaluating and controlling administrative and commercial activities of a public as well as a private order. Vast experience of administrative management of projects and construction of civil works.

Java Servlets, JAVA, ASP, VB, ASP.NET, C#.NET, VB.NET,JSP, JavaScript, XML, AJAX,Oracle, MS SQL Server, MS Access ,IIS, Apache

MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments

Power Plant Operation And Maintenance Management

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Extensive international experience in Plant Operation, Production & Maintenance in Oil & gas facilities onshore & offshore.

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Substation, Construction, Maint. HV work

Oil & Gas, Petrochemical Industry Specialist

All aspects of mineral processing plant construction

SENIOR DESIGN DRFTSMAN / TEAM LEADER

Project Officer for UBAGROUP Project Team. HSE Level 2 Certificate from British Safety Council. A Mechanical Engineering graduate from the University of Ibadan, Ibadan Oyo state. Dynamic, Creative, Self motivated and Computer Literate with eyes for details, And Ready to Learn more

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out