Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #4175
next resume »»
CONTACT INFORMATION:
View contact information...
PROFESSIONAL WORK EXPERIENCES
CONSTRUCTION SUPERINTENDENT (EEI-Al Rushaid) 1998- 2003
GHAZLAN II POWER PLANT EXP'N PROJECT
JUAYMAH, SAUDI ARABIA
In-charge of Balance of Plant (BOP) of the 4 units 600 MW Steam Power Plant Project. Installation of BOP equipment and piping in the following areas:
a. Seawater Intake
Pumps- Auxiliary cooling water, Circulating Water, Firewater,
Bearing tube cooling water and screen wash
Gates- Stop log 21 units
Screens- Bar Screen and Drum Screen 21 units each
Cranes- Gantry crane 2 units 40t cap. & 80t cap.
b. Existing & New Hypochlorite Plants
Electrolyzer & separator 8 units
Rectifier transformer 8 units
Hydrogen gas release tank 4 units c. Seawater Desalination Plant Units 1A, 1B & 1C
Evaporator (assembly of 5-block 200 ton Evaporator)
Steel Structure for Desalination Evaporator
Brine Heater, Decarbonator, Seawater recirculation pump, Chemical
Dosing skids, deaerator and associated pumps d. Potable Water Treatment Plant
Calcium chloride feed unit, calcium hypochlorite feed unit,
Sodium Bicarbonate feed unit e. Firewater Pump House
Maintenance jockey pump 2 units
Motor driven fire pump 2 units
Diesel engine fire pump 1 unit f. Auxiliary Boiler
Steel structure, Boiler unit, storage tank and deaerator, economizer
Air & gas ducts, chimney and feed water pumps g. Demineralization Plant
Mixed bed exchangers, desal water storage tank, caustic acid tank
Regeneration & caustic pumps, heaters h. Hydrogen Plant
H2 Compressor, H2 storage tanks, buffer tank i. Gas Insulated Station & Communication Bldg.
HVAC ducts, condensing units, air Handling units and humidifiers j. Low Pressure Gas Reducing Station
Knock-out drums, fuel gas heaters and interconnecting pipes k. Fuel Oil Pump Station
Fuel oil pumps, Fuel oil heaters and interconnecting pipes l. Emergency Diesel Generators 6 units including the ff:
Radiators (outdoor), silencers (roof-mounted), air compressor, air receiver, lube oil drain tanks, fuel oil day tanks and interconnecting pipes m. Pipe rack piping
Fuel gas, fuel oil supply & return, steam, control & service air, nitrogen, shutdown corrosion protection, hydrogen, closed cycle cooling water, demineralized water, desalinated water, potable water and carbon dioxide.
n. Fire protection Piping
Fire pump Bldg. Communication Bldg. & GIS, Existing & New Hypochlorite Plants, Potable water Treatment Plant, Auxiliary Boiler, Hydrogen plant, LP Gas Reducing Station, Fuel Oil Pump Station, Emergency Diesel Generators Bldg.
o. Underground Piping
Fiber glass Reinforced Plastic (FRP)
Wastewater collection & disposal, oil spill prevention, chemical waste collection, chlorine boiler wash water & seawater desalination
Polyrinyl Chloride (PVC)
Offsite utilities wastewater lines, firewater and potable water
High Density Polyethylene (HDPE)
Site fire protection lines
PROJECT-IN-CHARGE (EEI CORP.) 1997-1998
SAN MIGUEL CORP. BEER BREWERY PROJECT
VALENZUELA, METRO MANILA
. Fabrication and erection of ten (10) stainless smokestacks and steel structure including concrete foundation
PROJECT-IN-CHARGE (EEI CORP.)
UHDE POLYPROPYLENE PLANT EXPANSION PROJECT
BATANGAS II, BATAAN
. Erection of 2 units PP pellets silos, automated bagging machines, cooling towers, gas reactor, high pressure vessels, interconnecting pipes, hot & cold insulation and cladding works.
PROJECT-IN-CHARGE (EEI CORP.) 1996-1997
NESTLE PROJECT
CAGAYAN DE ORO City
. Construction of training center building with floor area of 850 m2, all civil and structural works including architectural finishes
. Bunker fuel piping, 10" dia. 1,100 meters
. Construction of concrete pavement and foundations for oil unloading area
. Construction of warehouse building
PROJECT-IN-CHARGE (EEI CORP.) 1995-1996
JULU CORN STARCH PLANT
DAVAO CITY
. Equipment installation, piping works, stainless tanks assembly
. Wastewater Treatment Plant, civil works and equipment installation
. Site development; roads, curbs and gutters, drainage system.
GROUP SUPERVISOR (EEI CORP.) 1993-1994
PRODUCTION CONTROL DEPARTMENT
CONSTN DIV. FABSHOP, BATANGAS
. Supervises three sections, namely: Production, Planning and Cost
Production- monitors progress of fabrication
Planning- estimates budgets man hours and measures actual
Productivity
Cost- allocates budget and tracks actual progress against budget
FIELD SUPERVISOR (EEI CORP.) 1991-1993
NATIONAL STEEL CORP. PROJECT
ILIGAN CITY
. Equipment installation and piping works of the following mill plants and accessories;
High density electrolytic cleaning line
Continuous Process line
Booster pumps
Short blasting machines
Air compressor
FIELD ENGINEER (EEI CORP.) 1990-1991
NATIONAL STEEL CORP. PROJECT
ILIGAN CITY
. Utilities piping: fabrication and installation of the pipelines;
water, oxygen, nitrogen, steam and bunker
PLANNING ENGINEER (EEI CORP.) 1988-1990
NATIONAL STEEL CORP. PROJECT
ILIGAN CITY
. Prepares budget and Controls cost of the project, including productivity measurements.
. Prepares project billings.
CHARGE HAND PIPING (EEI CORP.) 1987-1988
BRAUN TRANSWORLD CORP.
KUWAIT
. Piping installation on sleepers and pipe tacks including valves.
ENGAGED IN BUSINESS IN DAVAO CITY 1984-1987
PLANNING ENGINEER (EEI CORP.) 1983-1984
AL-MOJIL ESTABLISHMENT
SAUDI ARABIA
. Project planning and work scheduling at Tanajib Desalination plant
MAINTENANCE ENGINEER (EEI CORP.) 1979-1983
MANDALUYONG, METRO MANILA
. In-charge of repairs and maintenance of all mechanical equipment in foundry plant, including machine shop Pattern shop.
MECHANICAL ENGINEER (NIA) 1977-1979
NATIONAL IRRIGATION ADMINISTRATION
TAGUM, DAVAO
Preventive maintenance of light and heavy earthmoving equipment in irrigation construction areas.
EDUCATION
COLLEGE: University of Mindanao, Davao city
Mechanical Engineering
Graduate: 1977
Government exam passed:
1. Mechanical Engineering Board Exam
Registration No. 15698, February 22, 1978
2. Civil Service, Professional
SECONDARY: University of Mindanao, Davao City
ELEMENTARY: Magallanes Elementary School, Davao City
PERSONAL
BIRTHDAY: SEPTEMBER 29, 1954
SEX: MALE
CIVIL STATUS: MARRIED
HEIGHT: 5' 10"
WEIGHT: 185 lbs.
RELIGION: ROMAN CATHOLIC
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 651 to 700 of 3115)
Go to Search Parameters...
Brief Description
I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.
Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),
I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.
A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.
Truck driver
A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.
20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.
I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.
Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package
Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.
Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.
Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)
NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.
Looking for a new challenge at the end of 2003 my present contract end then
C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering
I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),
Erection, Commissioning field instruments & Systems
AutoCAD, PDS (3-D modeling). Lead engineer of erection department
Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.
Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.
Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.
Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi
I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.
A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.
30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.
Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD
ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.
Mature Canadian seeking work on major civil projects. Available Immediately.
Piping Design using CadWorx, Smart plant Review. Construction General Foreman
3 years Diploma (mechanical engineer) &12 years work exp- oil & gas area for mechanical supervisor.
Seasonal Professional with nearly 9.3 years of experience in Construction, Erection & Project Management and Team Management with well known organizations. Demonstrative abilities in identifying potential, deconstructing complex situations and further conceiving and implementing streamlined solutio
Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.
Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.
A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings
Diploma of Associate Engineer in Civil Technology
I have BSC in electrical engineering and now I am working in ethiopian electric power corporetion since june 16 - 2005 under protection and communication enginering
I finished in diploma in Architecture, master diploma in architecture cadd
I have 4 years experience exclusively as a safety and Security professional. Presently working with Technical & Trading Establishment (Technical Division of Easa Saleh Al Gurg Group) as a Health & Safety Officer. As far as my Education is concerned, I Have Completed my Diploma in Mechanical Engineer
I have more than 14 years expertness in construction and 6 years in LNG and oil and last project for me was in Sakhalin I work there more than 2 years
Proficient in Microsoft Office suite (Word, Excel, PowerPoint) and AutoCAD
I have worked as an Associate RF Engineer where my responsibilities were . Post & Pre Drives, Single site verification, hand off, call dropping, blocked calls, signal level, and frequency scanning . Used Delorme Streets & Atlas for route determination & navigation.
I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE
Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.
I am an Instrumentation Supervisor with a large experience in oil and gas projects, I have worked many years for importants companies in Brasil, Saudi Arabia, UAE, Mexico and USA.
Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.
Construction Engineer in Oil and Gas Facilities
Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.
11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,
electrical design/project engineer with 14 years of work
with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
[ 14 ]
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Construction;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com