Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4368 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATIONAL: Bachelor of Science in Civil Engineering from Bangladesh QUALIFICATION University of Engineering & Technology (BUET), Graduated in 1963.

PROFESSIONAL: Member of the American Society of Civil Engineers (ASCE)
SOCIETY Member of the Institute of Engineers, London (MIE)
Fellow of the Institute of Engineers, Bangladesh (FIEB)

KEY QUALIFICTION

Over 25 years of experience of which have more than 15 years of experience in Developed Countries:

January 1999 to July 2002

* Deputy Project Manager, Asian Development Bank (ADB), OPEC, the Government of France and Spain funded US$ 340.00 (approx.) million 100 km long Jamuna Bridge Railway Link Project, Bangladesh. This project comprises of construction of embankment facilities, rail track and constructions of 63 bridges and 91 culverts.

January, 1991 to 1992.

* Project Engineer, of Jamalpur Priority Project (FAP 3.1), funded US$ 50 million by European Economic Community (EEC) under which about 110 km long embankment, internal connecting roads, sluice gates and culverts etc were under study.

September,1980 to August,1990

* Section Chief Engineer, Ministry of Public Works (MPW), KUWAIT for seven highway road projects consisting of: (i) Ist Ring Road ( 10km long, 2-way with 5-lanes, costing US$ 20 million), (ii) 2nd Ring Road (15km long, 2-way with 5-lanes, costing US $30 million), (iii) 3rd Ring Road ( 25km long, 2-way with 5-lanes, costing US$ 50 million), (iv) 4th Ring Road ( 30km long, 2-way with 5-lanes, costing US$ 60million).
(v) 5th Ring Road ( 40km long, 2-way with 5-lanes, costing US$ 80million),
(vi) ) 6th Ring Road (60km long, 2-way with 5-lanes, costing US$ 120million), (vii) 7th Ring Road (70km long, 2-way with 5-lanes, costing US$ 140million).

Also included the supervision of all material testings in the Central Roads Laboratory of Ministry.

March, 1976 to March 1980

* Senior Engineer, Ministry of Irrigation, IRAQ, among other works, was responsible for construction of over 100km of embankment for motorable service roads.

December, 1964 to March, 1976

* Executive Engineer / Sub-Divisional Engineer, Bangladesh Water Development Board (BWDB), Bangladesh, responsible for construction of about 80km long embankment, 30 nos. sluices and culverts 30 km long internal roads (mostly asphaltic roads) and inter link roads including dredging works financed by World Bank US$ 10 million in Dhaka North Project and also 110km long flood protection embankment and 15km long asphaltic roads in Brahmaputra Project funded by World Bank.

EXPERIENCE

Jan 1999 – Aug. 2002
Bangladesh Consultants Ltd (BCL)
Deputy Project Manager - "Jamuna Bridge Railway link Project"
Responsible for project management, contract administration (FIDIC-4 Condition of Contract), preparation and issuance of variation orders, checking and certification of contractors' bill after checking quality control of work of the construction of 100km long new dual gauge rail line involves the placement of over 5.5 million cubic meters of embankment materials and construction of (63) bridges, (91) culverts and (7) railway station buildings for interim payment.The total cost of the Project is approximately US$ 340 million and the Asian Development Bank (ADB), OPEC and Government of France and Spain provided the funding.

Aug. 1992-Dec. 1998
Self Employed
Freelance Consultant
As Contract and Quantity Survey Engineer, worked for Bangladesh Consultants Ltd in the preparation of final estimate, contractual report for World Bank, ADB, and OECF funded Jamuna Multipurpose Bridge Project (Contract 3&4) - two approach roads of 38 km at a cost of US$ 56.00 million and World Bank funded Road Rehabilitation and Maintenance Project-2, four contracts of 122km at a cost of US$ 140.00 million.

As Project Manager, responsible for planning, design, management and supervision in the construction of 12 nos multi-storeyed buildings in Dhaka City. The total cost of this project was about US$ 2.00 million.

Jan.1991- Jul. 1992
Aqua Consultant & Associates Ltd
Project Engineer
Jamalpur Priority Project (FAP 3.1), a US$ 50.00 million flood protection project, financed by European Economic Community (EEC). The aims of this project was to protect the Jamalpur District area from flood by constructing 110km long embankment and easy internal communication system. with sluices and culverts for irrigation facilities.
Responsibilities included supervision of survey works, geotechnical works (SPT method), material tests and analysis in the Laboratory and helped in the preperation of feasibility report of the Project.

Sep. 1980- Aug. 1990
Ministry of Public Works (MPW), Roads Department, KUWAIT
Section Chief Engineer
Responsible for contract administration and construction management of multiple highway projects in collaboration of American, British Korean firms such as Atkinson Consulting Ltd, Deleuw Cather Consulting Ltd, Freeman Fox Consulting Ltd and Hyundai Construction Company. Was involved in the project management and supervision of construction of seven highway projects consisting of:

(i) 1st Ring Road ( 10km long, 2-way with 5-lanes,) in the periphery of Kuwait City including Palace costing US$ 20.00 million funded by Govt. of Kuwait, (ii) 2nd Ring Road (15km long, 2-way with 5-lanes) in Seaside to Jahra, costing US $30,00 million funded by Govt of Kuwait, (iii) 3rd Ring Road ( 25km long, 2-way with 5-lanes) in Seaside to West of Kuwait, costing US$ 50.00 million funded by Govt of Kuwait (iv) 4th Ring Road ( 30km long, 2-way with 5-lanes) in Seaside to West of Kuwait and about 10km from 3rd Ring Road, costing US$ 60.00 million funded by Govt of Kuwait,.(v) 5th Ring Road ( 40km long, 2-way with 5-lanes) in Seaside to West, costing US$ 80.00 million funded by Govt of Kuwait, (vi) ) 6th Ring Road (60km long, 2-way with 5-lanes) in Seaside to West of Kuwait, costing US$ 120.00 million funded by Govt of Kuwait, (vii) 7th Ring Road (70km long, 2-way with 5-lanes) in Seaside to West of Kuwait and south of 6th Ring Road, costing US$ 140.00 million funded by Govt of Kuwait.

Responsibilities also included in the supervision of all material testings in the central government laboratory: laboratory eg
1) Cement: Fineness, Autoclave, Normal Consistency, Time of Setting, Absorpsion, Soundness, Sand Equivalent etc.
2) Coarse Aggregate: Absorption, Sp. gr.,Unit wt., Los Angeles, Soundness, Design of all combined gradation etc, Desgn of all type of concrete mixes
3) Steel: All tests in accordance with ASTM and BS
4) Soil: Liquid Limit, PL, PI, CBR and other tests 5) Asphalt/ Bitumin:
All asphalt tests and checking of mix design.

Reviewed bidding documents with the contract drawing. Evaluated and prepared variation orders and supplementary agreements. Prior to any scheduled interim payment, responsible for inspecting actual quantity of authorized completed work accepted under the contract without any defect. Was also responsible for the contract administration and certification of Interim bill.

Mar. 1976– Mar. 1980
Badra-Jassan Irrigation Project, Ministry of Irrigation, IRAQ
Senior Engineer
Supervised the construction of "Badra- Jassan" project. The scope of the project was to build about 100 km of embankments for motorable service road, canals with concrete lining, large pump houses, buildings etc costing about US$ 140.00 million (funded by the Govt of IRAQ). As a Senior Engineer supervised the Geo-technical works of Badra-Jassan Project for the construction of embankment, roads etc. Supervised the construction of about 100 km long embankment with motorable concrete road at the top, irrigation canal with concrete lining works, interlock sheet piling works for a large pump house etc. Supervised the construction of residential houses of the project, drainage and water supply line, overhead water tank etc. Helped and supervised the laboratory tests of all concrete, cement, soil, fine and coarse aggregates. Designed concrete mixes of different strength, combined gradation of fine and coarse aggregates.

Apr.1970- Mar. 1976
Bangladesh Water Development Board (BWDB)
Executive Engineer
Worked in the Dhaka North Project financed by the World Bank (US$ 10 million plus Local fund). The scope of the project was to protect the area from flood, to irrigate the land, development of communication as well as improvement of navigation. Supervised the construction of about 80km long embankment, 30 nos sluices and culverts, 30km long inter link and internal roads ( mostly asphaltic road ), dredging of canal works. Responsibilities included contract administration, negotiated cost of materials with the contract agencies prior to final agreement. Analysed and made comment on the "Meghna- Gumti Project", updated and prepared "Manu River Project". Supervised construction of multistoried buildings, civil works of power station, bridges. In addition, prepared and issued variation orders for any supplementary works.

Dec.1964 - Apr. 1970
Bangladesh Water Development Board (BWDB)
Sub-Divisional Engineer
Worked in the Brahmaputra Project of USA$ 10 million funded by the World Bank. This is a flood protection project. Supervised the construction of 110km long embankment with proper compaction of average 8m crest width and average of 12m height, the construction of number of multistoried buildings, store house, overhead tank for the colony etc. Supervised the construction of about 10 km asphaltic road of the project area, culverts, bridges, manufacture of bricks, maintenance and protection works, Geotechnical investigation etc Controlled the quality of works by constant testing of soil, concrete, asphaltic materials in the field laboratory. Responsibility also included in the management of the project.

Feb. 1964 – Dec. 1964
M.R.Khan Construction Company, Bangladesh
Project Manager
Supervised the construction of number of multistoried Government staff quarters consisting of raft piling foundation, sewer line, distribution of water supply line, asphalt road in the project area and construction of other private residential buildings.

REFERENCES: Available upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 301 to 350 of 3118)Go to Search Parameters...
Brief Description
CAD Drafter with 14 years of experience in most commonly used software for Architectural and Civil Engineering Firms.
22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.
Engineering/Management professional offering expertise in domestic and international construction management and engineering support. Demonstrated proficiency in managing schedules, budgets and personnel for multiple projects with an emphasis on profitability in a variety of environments.
Licensed Civil Engineer with BS degree in Civil Engineering; over 20 years experience in Land Surveying and Civil Engineering in government projects (irrigation, dam, reservoir, roads), construction and surveying firms in the Philippines and abroad.
HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.
I have over 35 year's experience in the Cement Industry, Machinery Manufacture, Refractory Technology, Large Projects Execution and Commissioning,
Over 25 years of experience of which have more than 15 years of experience in Developed Countries.
ELECTRICAL-MECHANICAL TECHNICIAN CONSTRUCTION – INDUSTRIAL & MANUFACTURING OPERATION & MAINTENANCE – COMMISSIONING – CONTROLS – LO-MED-HI VOLTAGE ELECTRICAL INSTALLATION & MAINTENANCE – HVACR – WATER AND WASTEWATER TREATMENT PLANT.
Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.
CAD Technician
Free! Experienced Project Manager, Divisional Manager, with a proven track record of success in Construction, Interiors and Finishing works. MEng Degree Mechanical Engineering, ILM level 5 Diploma in Management,CITB Appointed Persons.IOSHI Certified.B S Construction Health and Safety
Skill : Computer microsoft office, Auto CAD, GPS application and Mapping
Survey and layout subdivision lots for rural and urban development and established and marked legal boundaries of properties using different kinds of surveying instruments.
A highly motivated technically superior supervisor/ senior engineer who works especially well as part of a team. Seeks employment with emphasis on continual professional development.
Twenty six years of experience as Chemical Engineer working on different facilities, on Production, Power House, Operation, Commercial, Safety, Hygiene and Environmental Control Departments.
Fire Protection design with construction experience in installation of fixed fire protection systems. Possess in-depth expertise in the bid criteria, layout, hydraulic design, estimating, sales, contracting, installation, repair, inspection and testing.
Sub : Application for the post of Project Manager
My experiences in the field of mechanical mostly covered construction/maintenance of power plants and oil/gas/petrochemical plants. Pls. see attachments.
I have done bsc in civil engineering and have an experience of 20 years in it.
Highly organized, efficient, presentable lady with excellent computer skills, with over 9 years proficient experience gained in the field of Engineering, which includes proper Interfacing or coordination within the projects, also assigned and assist Proj. Manager in all documentation and supervision
Welding Engineer / Welding Inspector
10 experiences in construction field
I’ve done a lot of projects in the past 21 years. My past experiences have typically been in 24 hr/day industrial plants including pulp & paper, Alcoa, and several utilities. I can handle any part of the project from concept to start-up.
More than 25 years experience in electrical field and overseas on-shore,off-shore oil/gas projects in construction,commissioning,preservation,maintenance,training/very good communication skills:English-Russian fluent,French-Italian good level.
Work as Senior Civil engineer in all aspect but mostly in Quality control and Materials control
I am a self employed, highly motivated and innovative Engineer. I have much experience in the management of projects for the construction of Rail Equipment plants, Aircraft Facilities, Paper and Steel Mills.
Structural Design Engineer
Experienced IT Administrator / Technician. Help Desk support and project implementation in a fast paced corporate environment.
Application of E&M Site Engineer / Manager
Inspection, QA/QC, Welding Inspection, ISO Auditing, Pipeline
Quality control or administration on about steel structure and pressure vessels.
Senior Cost and Planner Engineer
Application For The Post Of Electrical and Instrumentation in Project Engineering
M.Tech., Expertise in Electrical & protection
Engineering degree with experience in Construction of Petrochemical, Gas Plant and MODU (Jack-up and Semi--Submersible) in the field of Piping, Welding and Painting
I have 15 years plus supporting mechanical engineering as a 3D Solids/ 2D CAD Draftsman
Expecting a challenging and dynamic career in Civil/Quality Control and Quality Assurance where I can apply my knowledge and development skills.
Experienced Certified Engineering Geologist. Perceptive, creative problem solver. Computer literate. Effective communicator. Undaunted by remote operations. US and Australia resident.
A licensed Civil Engineer, organized individual, goal oriented, committed to responsibilities, affable person, self motivated, determined and a God fearing person.
I have 12 years of experience in different Civil Construction project such as Container Terminal with Jetties, Heavy Industry, Cement Factory, Textile Mill, High Rise Building etc. During my service period I was responsible for Preparation of Tender, Tendering, Supervision, Planning, Estimating etc.
Structural design and supervision
Knowlegle in the field of civil and structural engineer
Experienced Land Surveyor (Geodetic Engineer/Surveyor)
HVAC ENGINEER HAVING 5 YEARS EXP IN MIDDLE EAST
NACE CERTIFIED COATING INSPECTOR WITH 8 YEARS OF COATING EXPEREINCE
diplamo electronics & communication engineer
Civil Structural Engineer
Civil/metal structure engineer from Russia. Designing of of oil refinery and petrochemical enterprises. Languages: english-communication (IELTS 6.5).
I did M.tech in Structural Engineering and i have the knowledge of STAAD-Pro2003,AutoCad2004,MSofficeetc.
Objective Seeking to advance my professional career in the international arena of constructionmanagement. Open for relocation to most any international project.
First   1   2   3   4   5   6   [ 7 ]   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com