Resume - INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materi...

Misco Jobs

Resume #44777

CONTACT INFORMATION:
View contact information...

RAPHY T. JOSEPH

INSPECTION ENGINEER / INSPECTOR (QA/QC / Welding / Piping / NDT / Mechanical / Materials / Coating and Painting)

EXPERIENCE BRIEF

I have 17 Years Experience in PIPING FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities and Work Supervision) in large International projects (PETRO-CHEMICAL, CHEMICAL, OIL, GAS, REFINERY & PIPELINE Projects)
Roles & Responsibilities:
* Review Contractor's method statements, QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities.
* Monitor delivery of permanent materials and ensure the quality of products / consumables / materials comply with requirements of established Standards & Specifications.
* Perform routine surveillance, inspection, monitoring, auditing & assurance of Contractor's site activities(Fabrication and Welding, NDT, Coating and Painting) in accordance with the Projects and Contractors, specifications, ITP and Quality Plans.
* Identification of risks to the quality of work and the completion program, and associated solutions.
* Supervision of Piping Fabrication, Welding, Mechanical and Painting jobs (Construction & Maintenance) in line with Project requirements
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Interpret and evaluate NDT Results, witness Hydro test, Pneumatic test and Post test Re-instatement.
* Conversant with International Codes & Standards like ASME, ASTM, AWS, API, ARAMCO, QP, SHELL / PDO and AGIP Specifications.
* Ensure all pre-construction activities and qualification trials are witnessed and approved as necessary. Ensure the Inspection & Test Plan of each activity is fulfilled and "hold points" of the company are completed in due time.
* Audit, inspect equipment of Contractors. Advice and assist Contractors in maintaining and upgrading their equipment to ensure high quality job. Trouble shooting. Maintain day-to-day liaison with Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Review and comment upon Contractors daily inspection records for activities covered and investigate any anomalies / queries
* Raise non-compliance reports where applicable and ensure satisfactorily closed out
* Repair follow-up, Conforming line check as per P&ID, NDT clearance, Punch List preparation, follow up of final completion

CAREER HISTORY:

SENIOR WELDING INSPECTOR, BUREAU VERITAS INSPECTION LTD. August 2006 – June 2007. (Worked as Company - AGIP KCO- Representative) Kashagan Experimental Development Project – AGIP KCO, Atyrau, Kazakhstan.
Responsibilities: -
* Review Contractor's method statements, QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities. Witness and approve all pre-construction activities and qualification trials.
* Monitoring, auditing & assurance of Contractor's site activities in accordance with the Projects and Contractors, specifications, ITP and Quality Plans. Executes the specific inspections on materials, equipments and construction/installation activities on site.
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Raise non-compliance reports where applicable and ensure satisfactorily closed out
* Maintain day-to-day liaison with Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Review and witness of NDE. Issuance of Punch list. Giving clearance and witnessing for Hydrostatic Test. Review Test Packages

SENIOR QA/QC INSPECTOR–MECHANICAL,WORLEY PARSONS OMAN, Dec. 2004–May 2006, (EMC Project, client - Petroleum Development of Oman)
Responsibilities: -
* Monitoring and Inspection of Fabrication, Welding and Painting activities of Piping and Mechanical jobs as per ASME/ANSI B 31.3 and SHELL / PDO Specification. Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Conducting PQR and Welder Qualification tests and witness Destructive tests as per ASME Section IX / 31.3. and SHELL / PDO Specifications.
* Ensure all the personnel employed and operating in welding and NDE activities is duly skilled and qualified in accordance with the applicable specifications, codes and regulations. Perform Internal & Sub-contractors audit. Perform Functional checks and mechanical completion checks
* Maintain day-to-day liaison with Sub Contractor's site QA/QC staff. Prepare daily reports of all site QC activities performed.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness, PMI.
* Raise NCR where applicable and ensure satisfactorily closed out. Prepare Final Test Packages. Issuance of Punch list. Witnessing Hydrostatic test

QA/QC INSPECTOR (WELDING / PIPING), CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY – QATAR. 2003 Feb.–2004 Oct. (Common Cooling Water Pipeline Project, client - Qatar Petroleum)
Responsibilities: -
* Conducting P Q R & W Q T and witness Destructive tests as per ASME Section IX, AWS D 1.1, AWWA M11 / C206 and API 1104.
* Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Monitoring and Inspection of Welding, Piping Fabrication works from piping pre-fabrication to field installation of Carbon Steel and Copper Nickel Piping as per API 1104 and Project specification for Pipeline Project (Common Cooling Water Project,).
* Verify/Review weld parameters of SMAW,TIG,SAW,FCAW,MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour)Low alloy, Cu-Ni materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Review and witness of NDE. Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness, PMI
* Issuance of Punch list. Giving Mechanical and NDE clearance for Hydrostatic Test. Witnessing Hydrostatic test.
* Perform Internal & Sub-contractors audit. Preparing Inspection Reports and Final Test Packages.

QA/QC INSPECTOR-WELDING / PIPING.MID EAST CONSTRUCTORS LTD–QATAR.2001May–2002May.(LNG Plant - DUKHAN, client - Qatar Petroleum)
Responsibilities: -
* Conducting PQR and Welder Qualification tests and witness Destructive tests as per ASME Section IX/31.3 and QP Specification ESL 22/23.
* Monitoring and Inspection of Fabrication, Welding and site installation activities of Carbon Steel and Stainless Steel Piping as per ASME/ANSI B 31.3 and Project specification. Monitor delivery and storage of permanent materials & Consumables and ensure materials are compliant
* Verify/Review weld parameters of SMAW,TIG,SAW, MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour)Low alloy materials.
* Review and Interpretation of Radiography films & other NDT, witness & review PWHT, Hardness Testing, PMI
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Follow Up of Non Conformance Reports. Issuance of Punch list. Witnessing Hydrostatic test. Preparing Final Test Packages

QC INSPECTOR-MECHANICAL, A.Y.T.B.CO.LTD-Saudi Arabia. 1995Dec–2000June. (Petro-Chemical & Refinery projects,clients - LUBREF-Yanbu, SADAF-Jubail)
Responsibilities: -
* Material Inward Inspection and check material trace ability through out the execution of work.
* Monitor and Inspection of Fabrication and site installation activities of Structural and CS, LTCS, SS, DUPLEX, Low Alloy Piping jobs.
* Verify/Review weld parameters of SMAW,TIG,SAW,MIG process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour), SS, Low alloy, Cu-Ni materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Interpreting and evaluating of NDT Results, witnessing Hydro test, Pneumatic test and Post test, Re-instatement
* Preparing Test Packages and Giving Mechanical clearance for Hydrostatic Test. Witnessing Hydro Testing.

ASSISTANT ENGINEER-QC, PETRON ENGINEERING CONST.LTD-INDIA.1994Sept–1995Dec, (Poly Propylene project,client - Reliance Industries LTD, India)
Responsibilities: -
* Conducting P.Q.R. & Welders Qualification Tests and witness Destructive tests as per ASME Section IX / 31.3.
* Inspection of Welding, Fabrication, Painting and site installation activities of Heavy Structures and Piping, required for Poly Propylene project as per relevant codes and client specification.Monitor delivery of permanent materials and ensure materials are compliant
* Verify/Review weld parameters of SMAW,TIG,SAW process to be with in range as specified in approved WPS during the shift on daily basis and maintain the records for CS,LTCS,(Sour & Non Sour),SS, Low alloy, materials.
* Monitor the performance of welders, repair of welds, analyses the causes and initiate preventive and corrective actions.
* Control of Repair Welding. Prepare and Submit Inspection Offer Letters to Client/Consultant.
* Making Records & Reports of Fit-Ups, Alignment, Non-Destructive Tests, W.P.S., and P.Q.R. etc.

SUPERVISOR–PIPING,SHAPPOORJI&PALLONJI CO.LTD-India.1993June–1994Sept.(Chemical Plant project,client - Gharda Chemicals Ltd., India.)
Responsibilities: -
* Supervision of Piping (Carbon steel, Stainless steel and Non Metallic),Mechanical and Painting, jobs maintaining required Quality standards as per Project specification and Drawings.
* Monitor delivery of permanent materials &Consumables and ensure materials are compliant and stored properly.
* Liaison with Client, TPI and Consultant. Preparation of Progress Records and Reporting.

SITE SUPERVISOR, WELL FAB Erectors PVT LTD, India.1988Oct–1993March, (Chemical &Petrochemical projects,clients - Gharda Chemicals/Reliance Industries, India)
Responsibilities: -
* Execution of Structural, Piping and Painting jobs-Maintenance -(Carbon steel, Stainless steel and Non Metallic) maintaining required Quality standards as per Relevant Codes, Project specification and Drawings.
* Ensure permanent materials and consumables are compliant and handling according to Project requirements.
* Liaison with Client, TPI and Consultant. Quantity preparation for Billing, maintaining Progress Records and Reporting.

EDUCATIONAL QUALIFICATION
* Graduated from 3 year Engineering college in Mechanical Engineering
PROFESSIONAL CERTIFICATIONS
* CSWIP 3.2 certification as SENIOR WELDING INSPECTOR.
* ASNT Level 3 - Certification in R T. ASNT Level 2 - Certification in U T, M T, P T.
* NACE COATING INSPECTOR Level 1 – Certified
* NQA-UK Certificate of Training (IRCA Registered) in ISO 9001- 2000 QMS AUDITOR.
* ISNT (Indian Society for Non Destructive Testing) Certification as WELDING INSPECTOR.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 3123)

Go to Search Parameters...

Brief Description

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Applying for the post of safety officer in your esteemed concern

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I am Tank and piping/pipeline / structure Superintendant

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

I'm the Safety Manager for the company I'm with now...

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

Pipefitter with supervisory and training facilitator experience

Prevent / correct unsafe acts & condition.

Project Manager - Sales - Technical

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Civil Engineer To render quality service to the company that I may be a contributory factor in achieving the company’s objectives.

Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available

Project Management, Primavera P3E Scheduler

Instrument Engineering, Fire & Gas Engineering

Manager / Engineer ( HW/SW/QA/Training )

Bachelor of Engineering (Mechanical) from Adiparasakthi Engineering college, Melmaruvathur, Madras university. (April 2002)

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma

Marine + International Projects Oil & Gas

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

Technical Project Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out