Resume - Educational Qualifications: Master of Engineering in Mechanical Engineering spec...

Misco Jobs

Resume #45432

CONTACT INFORMATION:
View contact information...

PROFESSIONAL QUALIFICATIONS:
- American Welding Society (AWS) -Certified Welding Inspector (CWI) -AWS-CWI Certificate no.02072291
- ASNT (American Society for Non-Destructive Testing) NDT Level -III Certificate No. 140641
1. ASNT (American Society for Non-Destructive Testing) NDT Level - III in Radiographic Testing
2. ASNT (American Society for Non-Destructive Testing) NDT Level - III in Visual and Optical Testing
3. ASNT (American Society for Non-Destructive Testing) NDT Level - III in Ultrasonic Testing

NDT Level - II in
1. Magnetic Particle Testing
2. Liquid Penetrate Testing

OBJECTIVE:
To be associated with professionally managed organization to apply the skills and experience gained at the various Multinational organizations and to grow along with the organization.

WORK EXPERIENCE:
Organization: TOTAL FINA ELF, International
French Oil Company, France
Site: Block 10, EAST SHABWA OIL FIELD, Yemen
Position & Period: QA/QC In charge from July 2005 to Till today

Responsibilities: Quality control

Ensuring effective inspection performance by contractor, by:
Conduct inspections of all incoming equipment and selected bulk materials
Conduct regular inspections on fabrication and construction activities
Conduct shop inspections at local fabricators
Witnessing Welding Procedure Qualification tests, Welder Qualification tests and its approval
Witnessing Hot tapping operations
Provide expertise on inspection techniques and methods as needed
Verify compliance with agreed corrective actions to non-conformances
Witness selected NDE activities, review radiographs etc.
Ensure safety performance in quality control (ionizing radiation, confined spaces etc.)
Witness inspections and conduct acceptance inspections on behalf of the Owners team, incl.
Assistance to mechanical discipline in witness inspections such as flange faces or bolt torquing and in acceptance testing such as equipment internal inspections before final closure.
Witnessing of hydrostatic an pneumatic pressure tests for acceptance
Witnessing of safety relieve valves calibration testing
Acceptance inspections of safety relief valves final installation, including interlock systems verification
Quality Assurance:
Having Knowledge of ISO, API, ASTM standards
Review for acceptance sub contractor quality systems documentation, in respect of ITPs, procedures for quality control etc.
Be pro-active in ensuring effective use of ITPs and related documents in all quality monitoring activities.
Audit sub-contractors on QA/QC matters.
Audit compilation of the project quality records dossier
Be pro-active in ensuring effective implementation of non-conformance and deviation control systems.
Conduct technical and quality assessments of local subcontractors.
Participate in quality audits
Assist in reviews of subcontractor quality dossiers and final system compilation manuals.
Ownership of QA/QC initiatives within the Construction teams
Apply an audit and review follow-up system with the principle Contractor, and lead / participate in such.
Approving the QA/QC procedures, Inspection Test Plans and Quality assurance procedures of Contractors

Organization: STOLT OFFSHORE, (Earlier it is ETPM),
Warri, Nigeria

1. Projects: 1 ERHA Project- TIE BACKS, OFFSHORE LOADING SYSTEM AND MOORINGS-EPC2 - of EXXON MOBIL
2. AMANEM/ KPONO Project SCOPE - Jacket, Deck, Pipelines, Riser, Piles,, Piping- of TOTAL FINA ELF

Clients: 1. EXXON MOBIL
2. TOTAL FINA ELF

Third Part Inspection Agency: Bureau Veritas

Position & Period: QA/QC Mechanical Engineer from 3rd Feb 2005 to July

2. Project: Sanha Condensate Off shore Hook-Up Project, Cabinda Field, Angola, West Africa

Client: Chevron Texaco & Cabinda Gulf Oil Company

Position & Period: QA/QC Mechanical Engineer (In charge) from 10th Dec 2003 to 11th Sep 2004

Organization: EXXON MOBIL, Nigeria.
Project: Off shore Riser Repair Project, Lagos, Nigeria, West Africa.

Position & Period: QA/QC Mechanical Engineer (Corrosion, Painting and Welding) from May 2003 to Oct 2003

Organization: STOLT OFFSHORE, (Earlier it is ETPM), Paris.
Project: Kizomba -A, FPSO Suction anchor piles for Offshore Lobito, Angola

Client: Exxon Mobil, Saipam & Bouygues Offshore (Sai-Bos)
Position & Period: QC Mechanical Engineer from Sep 2002 to Mar 2003

Assessment of NDT Subcontractor works- Oceaneering
Organization: EXXON MOBIL, Nigeria.
Project: Off shore Riser Repair Project, Lagos, Nigeria, West Africa.

Assessment of Subcontractor works - Willbros, USA.
Position & Period: QA/QC Mechanical Piping Engineer from June 2001 to April 2002

Organization: BECHTEL (ISO 9001 Company),
San Francisco, USA.
Project: Borouge Petrochemical Project, Abu Dhabi, UAE

Client: Borouge and Abu Dhabi National Oil
Company, Abu Dhabi, UAE

Position & Period: QA/QC Mechanical Engineer (Piping) from August 2000 to June 2001

Organization: LAHOUD ENGINEERING COMPANY LIMITED (ISO 9002), Dubai, UAE.
Project: General Utilities Expansion Project, Al Ruwais, Abu Dhabi, UAE
Client: Abu Dhabi National Oil Company, Abu Dhabi, UAE

Position & Period: QA/QC Mechanical Engineer (Piping and Equipment) from June 1999 to July 2000

WORK EXPERIENCE IN INDIA:
Organization: PUNJ LLOYD LIMITED (ISO 9001), New Delhi, India
1. Project: Cryogenic System Package, (Construction of LPG Storage Tank and Piping Work) for Jam Nagar Refinery
Client: Reliance Petroleum Limited, Jamnagar, India.
Third Party Inspection Agency: DNV, BARODA, India
Position & Period: Senior QA/QC Mechanical Engineer (For Cryogenic Tank and Connected Piping) February 1998 to June 1999.

2. Project: Mumbai Manmad Pipe Line Project,Mumbai
Client: Bharat Petroleum Corporation Limited, Mumbai, India.
Third Party Inspection Agency: Engineers India Limited, Bombay, India
Position & Period: QA/QC Engineer from Oct. 1996 to Feb 1998

3. Project: Effluent Disposal Pipeline Project, Surat
Client: Reliance Petrochemicals Limited, Hazira, Surat, India.
Third Party Inspection Agency: SGS, Bombay, India
Position & Period: QA/QC Mechanical Engineer from April 1996 to October 1996

EDUCATION & CERTIFICATION:
* M.E (Master of Engineering) in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%.

* B.Tech. (Bachelor Of Technology) In Mechanical Engineering from Jawaharlal Nehru Technological University, Hyderabad, India in July 1994 with 76.70%.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 3118)

Go to Search Parameters...

Brief Description

Over 20 years of Electronic, Electrical and Mechanical experience. 10 years of Field Service in both domestic and international travel.

I am lead piping engineer ,supervised 6 engineer ,6 autocad drafter and 7 PDMS staff.I am familiar with all international stds related to oil&gas ,petroleum and power plant.

HSE Manager in major energy, power generation, oil and gas sectors covering technical and commercial requirements. With professional experience in directing and mananing health, safety and the environment protection & sustainability development aspects as per OSHA framwork and guidelines. Strong abi

18 Years including 10 years in oil & Gas - Construction experienced Safety Specialist , having Mechanical engineering Degree from Bangalore University and Diploma in Industrial Safety From RLI Chennai, India & OSHA 30 Hours Trained - Key skills : Construction Safety Mangement, Auditing, Trainer

Educational Qualifications: Master of Engineering in Mechanical Engineering specializing in Welding Engineering from Indian Institute of Technology, Roorkee, Uttar Pradesh, India in April 1996 with 74.40%, American Welding Society (AWS) Certified Welding Inspector (CWI) -AWS-CWI Certificate

Planning, Scheduling, Project Controls, Cost Tracking, Site Management, Construction Management

3 yrs diploma in mechanical engineering with 1st class from bset, bhubaneswer (india) in April-2002 professional qualification: -• cswip 3.1 (twi) certification for welding inspector, cert. no- 36291 •surface preparations & paint application techniques (certification from jotun paint school)

Senior Primavera 6.2 Planner / Scheduler or Management Skills

Experience as Piping Designer, in performing Pipe Modeling, Piping Arrangement Drawings, Checking & Extraction of Isometrics from 3D Model. ƒá Hands on Experience in Piping Software¡¦s ¡V Bentley¡¦s PlantSpace Design series, Microstation, PDMS & TRIBON M3. Knowledge of Piping Stress Analysis.

I have done degree in mechanical engineering. I am having AWS-CWI certification. And I am also having approval of Saudi Aramco as a Welding Inspector. I have also done ASNT level-II in UT, MT, RT, and PT. I am having more than 5 years and 8 months experience in oil and gas field.

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

Result oriented Geotechnical/ Engineering Geologist with 2-3 years onshore experience in ground engineering with keen interest to develope further expertise in the field. Strong analytical and personal ability to problem solving solutions with Civil Engineering Geology knowledge of Construction

Experience in control Automation system ,contruction and oil and gas

PLANNING/SCHEDULING ENGINEER & BACHELOR OF ENGINEERING (CIVIL)

Autocad & Inventor Draftsman

I have 12 years work experience in Civil Engineering Constructions and 4 years experience in Environmental Remediation project for Brunei Shell Petroleum. My Supervisor experience includes execution of structures as per drawings and specifications with skilled group of trade persons and subcontracto

A multi-skilled mechanical/piping, Construction Superintendent/manager, QA/QC Engineer, with over 20 years international experience in the oil, gas, petro-chemical and power generation industries

Industrial Electrical, Instrumentation, Power Generation Systems, PLC and Scada design and programming, Construction and Maint.

•Over 9 years experience preparing detailed estimates for Capital Projects involving all engineering disciplines including process design, civil, structural, mechanical, piping, electrical, instrumentation, and process control for Mining and Heavy industrial Projects.

Sr. Piping Design, Lead Des, ACAD 3D, Microstation 3D

Estimating

Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.

Land surveyor, Road, Stormwater, Sewer, Subdivision designer

Strategic marketing, business development and executive search professional with strong record of implementing sales and strategic plans that support corporate and financial goals. An effective executive search director & professional.

A highly talented and accomplished Electrical Design Specialist with skills and experience in Electrical and Protection systems for EHV/HV substations (AIS/GIS) and MV Power Distribution systems.

* Exceptionally qualified Professional with more than twenty years of experience as a Field Engineer in the industrial and power industry

Structural Design Engineer with more than three years of experience in the field of design of bridges, underpasses, buildings and other highway related structures.

Bachelor of Civil Engineering from Jawaharlal

Any Job Opportunity in Contract Administration and Quantity Surveying

I would like to associate myself with an organization that provides ample scope to hone my skills and turn into versatile architect.

Structural Engineer with 2.5 year work experience and Master Degree

Quality and Welding engineer with rich experience over 12 years in oil and gas/petrochemical sector for most of years in offshore, I am looking for challenging position in international multi-cultural environment in QA/QC field.

I am proficient in the use of Primavera and microsoft project tools. I have about 6 years esperience in planning/scheduling of oil and gas and construction projects. Within my 7 years experiencece as a planner, i have been involved in development of base schedules as well as forecast schedules.

DCS/ESD - DESIGN,FAT,SAT,POWER_UP ,COMMISSIONING,HOT/COLD CUT OVER & MAINTENACNE

Piping and Pipe Stress Engineer with wide range of experience in industries Petroleum Processing, Power, Chemicals, Petrochemicals Polymers and Steel Production. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams

Project engineering/managment

Mechanical?Electrical Engineer,Steel Expert,Steel Plant operation Incharge Marketing & Sales Incharge ,QMS,EMS.OHSAS Regd Lead Auditor,MBA9Business Admin.Professional Doctorate in Environmental Management.,Handled Projects as well as Maintenance,Director,European Quality Body,Managing Directoer Asia

Project engineer-Mechanical, HVAC, Utility equipmets-Operation and maintenance

Senior Mechanical / Piping Engineer

Structural Steel & RCC Designs in the fields of Oil & gas, Power, Steel and Aluminum Plants and other Industrial Structures

I have followed the four-year degree program leading to the B.Sc Engineering Degree specializing in the field of Civil Engineering, and have obtained the B.Sc Degree with Second Class Honors (Lower Division) Pass.

Thirteen years of total experience in Project Engineering, Tendering, Cost Control, Material Procurement, Execution and Supervision of heavy civil and marine construction of seawater power and desalination plants and wharfs/jetties/local fuel oil and lng/ngl terminals.

Diploma in mechanical ,Draftsperson auto cad,catia v5, pro/e,staad/pro and microstation

on hydrologic and hydraulic analysis of waste water systems, analysis and rehabilitation of sewer systems, storm water management techniques, site planning, road designs, storm drain systems, erosion and sediment control techniques, cost estimations, Civil3D, AutoCAD, Hydraflow

I am well proficient in AutoCAD, 3ds Max and Photoshop

BSc CEng with over 6 years of experience in huge excavations & earting works, specialized in earthquake retrofitting of industrial, public buildings,Thermal PP,Pipe Line projects.

A self-motivated, highly disciplined and hard working graduate electrical engineer with over 26 years of extensive experience in various disciplines such as Specifications, Tendering, Design & Engineering, Construction, Project Management and O & M.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

I have 12 years experience in Installation, Commissioning & Operation of HVAC and Plumbing systems of any capacity

An Engineer + MBA from Mumbai University and having good experience in Construction Industry

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out