Resume - Structural Engineer, Ph.D., P.E. 10 years experience in structural analysis/d...

Misco Jobs

Resume #4923

CONTACT INFORMATION:
View contact information...

EDUCATION

Ph.D. in Structural Engineering/Mechanics November 1999
University of California, Los Angeles
GPA 3.713

Master of Science in Soil Mechanics May 1990
Tufts University
GPA 3.7

REGISTRATION Registered Civil Engineer, P.E., in the State of Michigan

STRUCTURAL ENGINEERING EXPERIENCE

Structural Engineer

ARCADIS (GIFFELS) 2002 to Date

* FORD ROUGE:

I worked on analyzing and reinforcing the various truss types such as Pratt and warren trusses for the Ford Rouge Project. The Ford rouge project is in the vicinity of 2 million square feet.

* GM WORLWIDE FACILITY GROUP:

I was on contract at GM for about 7 months during which I was responsible for large projects. I analyzed existing beams, columns, trusses, etc. and determined whether the existing members needed reinforcing based on the new loads. I then prepared a report that I submitted to the estimators to provide a cost estimate. I checked the possibility of upgrading crane capacities for various plants. This required an analysis of existing crane girders, columns, and foundations.

I also performed the required analysis and calculations to establish new presses. In some cases, I devised a scheme to raise the bottom chord of trusses to accommodate a new press with a higher crane. Moreover, I attended meetings, and prepared RFPS¡¦s, request for professional services.

* GM LAKE ORION:

I surveyed many bays in the field, and then analyzed the existing trusses under the current loads to determine whether the trusses needed reinforcing. Further, I reinforced the deficient members so that they can withstand the current loads without their being overstressed.

* GM PONTIAC:

I surveyed the field conditions, and calculated the pipe loads. I then analyzed the purlins, carrying trusses, and jack trusses to determine whether they would be overstressed under the current loads. This analysis was needed for anchor points.

Structural Engineer

HarleyEllis 2000 to 2002

* I worked at HarleyEllis for 2 years, where I designed both Steel Structures, and Reinforced Concrete Structures. I interacted with the Architects in order to meet both the structural, and the architectural criteria. As a result of my diligence, I met the deadlines for the assigned projects.

* Western Michigan University:

I designed the College of Engineering, from preliminary design through CD. I designed the floors, and checked the diaphragm. I also designed the Columns, the Base Plates, the Moment Frames including the Moment Connections, the Braced Frames, and the foundations. In addition, I designed all Masonry walls. As a result of this project, as well as previous ones, I am proficient in RAM Structural Systems, RAM FRAME for Wind and Seismic Analysis and Design, as well as RISA, PCAMATS, and ENERCALC.

* University of Cincinnati ¡* CARE¡¨ Structure:

This is a Reinforced Concrete Structure. I sized the beams, girders, as well as columns by hand. Then, I input these preliminary sizes into the RAMADVANSE program, a Finite-Element program for the Analysis and Design of Reinforced Concrete Structures, where I finalized the design.

* University of Cincinnati ¡* Medical science Building¡¨:

I analyzed the ¡* MSB¡¨ where major renovations were suggested. The building is an R.C. Structure with a joist-pan system. As a result of the suggested openings in the floor, I analyzed the joist-pan system, the beams, and the columns for deficiencies via RAMADVANSE, and PCA COLUMN. I entered the various load patterns, and checked the joists and beams for both Shear and Bending. Due to the suggested openings in the floor, I checked the adequacy of the diaphragm. Further, I suggested the needed solutions for the joist-pan, beams, Girders, and Columns.
* GM Shreveport:

Moreover, I Analyzed and designed part of the Shreveport structure which consisted of 100 Trusses from which additional loads were to be hung. This required an Analysis in order to determine whether the trusses needed reinforcing. According to the plans, I imposed all the necessary loads and modeled them in RISA where I performed the Analysis. In fact, I collected the data for the 100 Trusses, modeled and analyzed them in two weeks. Where reinforcing was needed, I performed the calculations by hand based on both the old and new sections, i.e. taking residual stresses into account, in order to determine the required reinforcing.

Structural Engineer

A.R.A. Inc., Structural Engineering Consultants 1999-2000

* OFFICE BUILDINGS:

I Designed the whole floor system for Composite Beams and Girders for the second and third floors, and Non-Composite for the roof for various projects via RAM structural Systems. Designed the Columns, and the Base Plates for these projects. Checked the calculations for representative Beams, Girders, Base plates, and Columns by hand. Designed the Isolated Footings, the Wall or Strip Footings, and the Retaining walls for these projects by means of ENERCALC. Performed Vibration Calculations for the above projects.

* WAREHOUSE/TILT-UP BUILDINGS:

I designed the Vulcraft systems for Tilt-up buildings, such as Office Max and Office Depot. Designed Joists, Joists Girders, Columns wit h a provision for a Future Mezzanine, Base Plates, Isolated Footings, and Wall Footings.

* I designed the above projects for Seismicity and Wind according to the UBC 1997 codes. Performed the Lateral analysis for the Diaphragm, Sub-Diaphragm, and Braced Frames. The design included the Nailing schedule, Struts, and Wall anchorage. Designed the Tilt-up Panels or Shear Walls for the In-Plane and the Out-Of-Plane forces.

Structural Engineer

S.K. Consultants 1984-1988

* R.C.: Designed Slabs, Beams, Girders, Columns, and Foundations.

* Steel Structures: Selected appropriate Decks, Designed Beams, Girders, Columns, Base Plates, and Foundations for commercial buildings.

* Prestressed Concrete: Designed prestressed Girders for Parking Lots.

TEACHING EXPERIENCE

Teaching Associate (Promoted to Teaching Associate in 1998) 1998 to 1999

UCLA, Civil Engineering Department

Introduction to Deformable Solids
Design of Prestressed Concrete Structures

Teaching Assistant 1995 to 1997

UCLA, Civil Engineering Department
Design of Prestressed Concrete Structures
Design of Reinforced Concrete Structures
Structural Mechanics

* Taught to Classes of up to 79 Students
* Held Office hours to assist students and answer homework-related technical questions
* Administered, solved homework assignments, and posted solutions
* Conducted Solution sessions
* Graded and Proctored Final Exams for Classes of up to 79 students

Teaching Assistant 1989

Tufts University, Civil Engineering Department
Foundation Engineering

* Held Office hours to help students with homework technical questions
* Solved homework assignments, and posted solutions

RESEARCH EXPERIENCE

Research Assistant 1992 to 1993

UCLA, Civil Engineering Department
Earthquake Engineering

* Conducted independent research to determine the most important parameters affecting the soil properties in dynamics

* Incorporated information into the Techbase Program to superimpose Earthquake, Geotechnical, and Geological Maps to determine the most susceptible structures during earthquakes
TECHNICAL SKILLS

SOFTWARE

STRUCTURAL RAM Structural Systems, RAM Frame, RAM Advanse, RISA, PCACol, PCAMats, ENERCALC, SAP, MathCAD

CAD Microstation/V8

SPREADSHEETS MS Excel, QuattroPro, Lotus123

WORD PROCESSING MS Word, WordPerfect

OPERATING SYSTEM Windows XP, Windows 2000, Windows NT, DOS

PROGRAMMING FORTRAN

COMMUNICATION SKILLS Strong written, and verbal skills

PRESENTATIONS ¡* Least square methods in structural analysis¡¨ The Second international Conference on Engineering Computational Technology & The Fifth International Conference On computational Structures Technology, Brussels, Belgium, 2000.

PUBLICATIONS ¡* Least square methods in structural analysis¡¨, Computers & Structures, 2002.

AWARDS/HONORS

* Hortense Fishbaugh Memorial Fellowship, Margaret and Charles 1996-1997
Pollak Memorial Scholarships

* UCLA Affiliates Scholarships: Adopt-a-Scholar Fellowship 1996-1997

* Malcolm R. Stacey Memorial Scholarship 1996-1997

* Tufts University: Tuition Scholarship for the Master's Degree 1988-1990

AFFILIATIONS Member of the ASCE and the AISC

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 2888)

Go to Search Parameters...

Brief Description

„X Diversified and proven experience in program management & development of infrastructure projects, including highways, rural roads, jeepable tracks, water supply, sanitation and irrigation schemes with regards to social mobilization, planning, implementation, contract administration

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

12 years work experianc in plumbing supervisor/engineer

Water Resources Hydrologist and Civil Construction speacialist

I am a 41 year old Civil Engineer with over 20 years of "hands on" construction experience. However, I have only had a Civil Engineering degree for 2 years.

MECHANICAL ENGINEER WITH A VAST EXPERIENCES IN REPAIR AND MAINTENENCES OF ALL CONSTRUCTION MACHINES AND PLANTS FOR ROAD MAKING INDUSTRIES.

Civil Engineering and Land Surveying

I m land surveyor and my experience in all types of Survey work in road, Concrete structure, Buildings, Steel structure, Pipe lines, Drainage & Underground mines Survey.

Quantity and design engineering: which includes, quantity estimating for bidding purposes; claims preparation for project progress and accomplishments including quantity computations; plans and drawings preparation including designing; survey data computations; project scheduling; project monitoring

Young, energetic and high qualified engineer in construction works. Well experienced especially in Marine and Civil Construction in Midle East and Asia countries such as: UAE, Vietnam, Cambodia, Singapore, and Indonesia.

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

Structural Engineer, Ph.D., P.E. 10 years experience in structural analysis/design of commercial and industrial buildings, and schools.

M.S. Civil Engineering with an emphasis on Project Management. Skills developed while working as an Engineer with the South Carolina Department of Transportation and as Owner/Project Manager of multiple Residential Construction Projects

A challenging opportunity in the management, engineering or sales field

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

I am a Civil Engineer with 8 years experience in executing several national constructional projects in Iran as a Quantity Surveyor, Site Engineer,Project Manager,Supervisor, Welding Inspector ans Surveyor.I am familiar with AUTOCD,SAP2000.WORD and EXCEL softwares.Also, I have the IELTS certification

Instrumentation and Control engineer

B.E MECHANICAL EQUIPMENTS AND HEAVY EARTH MOVING MACHNIRIES BATCHING PLANTS

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

My name Issam working as a civil supervisor , i was born in Latakia- Syria in 28/09/1975 . I worked in building site , pipeline , plant construction , break water construction ,jetty constuction ,

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Establishment of Health, Safety and Environment Management function

I have two degrees, one in structure engineering and second in computer science. I have extensive experience in design and construction of civil structures. I have over three years experience in engineering analysis and design software development.

Seven year experience in HVAC design and maintenance

Equipement / Piping Erection & Maintenance

Field and site experience, Ethylene Plant, Pipelines, Water treatments, Semiconductor tool upgrades, Refinery shut down, Jail, Clean rooms, Data center, Hospital, Schools, Substantial, Close-outs, MEP, Rotating and Static equipment, Process piping, Commissioing and startup, Schudling(P3)

I have directed diverse construction sites, being in charge of but of 300 people, and controlling great projects of construction

Experience in the Power, Water and Wastewater automation and process control. Designing and developing automation solutions for PLC/ SCADA systems. Project management of automation and Telemetry projects. Leading role in design, engineering, testing and commissioning

B.E., MECHANICAL ENGINEER

I am a four year complited degree civil engineer and i had worked in two prestigious Delhi metro rail project in India and since starting i am well experinced in Bridge const I am experinced in Well Pile foundation and all kind of sub and super structure activities i am exp in auto cad and MS off

I am structural engineer for more than 10 years

Structural Engineer

Civil engineer with 14 years experince (12 in saudi arabia). Skills include estimation, quantity take off, quotation requests, negotiations with suppliers, preparation of technical submittals, work progress reports, co-ordinations etc

Project designing electrical ,instrumentation & control systems.facility management services, operation maintenance and costruction

Project engineerig

Worked as Civil/Structural desgner and piping as well. Perform basic design calculation, planning, scheduling, project evaluation, specifications, bill of materials & cost estimates.

See Below

I am a hardcore professional with a Mechanical Engineer and more than 15 years multifaceted exposure in the Oil & Gas, petrochemical field. I was working with Brunei shell Petroleum for SAP implementation, and Petronas Gas Bhd, Malaysia, as a Maintenance Planning Executive in abroad.

An experienced civil and structural engineer. Strong background in steel & concrete structures and in marine engineering and hydraulic projects. Advanced Geotechnical knowledge. Design and supervision of construction.

Architecture degree holder with 6 years experience in Vertical & Horizontal Projects and have knowledge to operate computer software such as: Microsoft Project / Excel / Word, Auto-Cad latest Version, Photoshop 7,CS 8&CS9, Sketch-up & 3D Max6 & Max 7 and developing in V-Ray for Design Presentation

Controll

Qualification: Masters in Transportation Engineering

BE in mechanical engineer well known experience in structural glazing ,clading,SS work,and all aluminum work

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Graduate Quantity Surveyor/Estimator, 10 Years Experience with B.Sc., AAIQS, ICIOB and MA Cost E.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out