Resume - Searching for a position within the Construction & Civil/Structural Engineering ...

Misco Jobs

Resume #5042

CONTACT INFORMATION:
View contact information...

Professional Experience:

2002-Present RMF Engineering, Inc. - Baltimore, MD
Title: Project Engineer
1.Oversee the overall structural design of various projects. These include chillers and boiler plants, building of health facilities, industrial buildings and all other structural support to civil and site work.
2.Conduct the needed liaison with other engineering disciplines to reach accurate professional decisions.
3.Asset integrity assessment and stress analysis evaluation for the structural integrity of fatigued structures and retrofit buildings, and development of rehabilitation plans and designs.
4.Prepare structural drawings and specification documents submitted for the bidding process.
5.Evaluate the structural cost estimate.
6.Review shop drawings and its compliance with structural drawings.
7.Attend site inspections and monitor progress and quality of work, material inspection and testing.

2000- 2002 Black & Veatch Corporation, Kansas City, MO-USA
Title: Civil/Structural Engineer II
1.Structural design calculation following the standard codes and B&V recommended practices.
2.Design, modeling and analysis of Structural Steel pipe rack of the power block. These include design of base plates and anchor bolts, connections, beams, columns, and vertical/horizontal X-bracing.
3.Structural foundation design for equipment. This includes footings and concrete base mat.
4.Structural condition assessment and evaluation of structural elements of the retrofit projects. This includes developing of spreadsheets and calculations supporting any amendments.
5.Review Civil/Structural shop drawings and ensure its compliance with design requirements, contract requirements, properly coordinated with other discipline and submitted as per construction schedule.
6.Site feasibility studies. This includes site assessment, review of geological report, site accessibility, utilities location, and other potential factors.
7.Design the site layout. Coordinate with interdepartmental engineers for specific equipment layout and sizes. Develop Entire plan. This includes design the grading layout, storm water and drainage systems, buildings parameter, storage tanks, parking, entrance and driveways.
8.Perform several calculations to balance the site (cut/fill quantities), and finalize the site bill of quantities.
9.Conduct supportive documents/calculations for the permitting agencies.
10.Participate in reviewing Engineering Change Notices (ECN) and provide comments to the Construction Supervisor.

1998-1999 United Nations, Jaffna, Sri Lanka
Title: United Nations Civil Engineer
1.Supervise the technical aspect of implementation of infrastructure projects with total budget over 1.5 million U.S. Dollars. Conduct needs analysis and design of structural elements.
2.Oversee the design of concrete structures and detailed shop drawings. Closely monitor concrete pours and check continuously of concrete materials delivered to site, ensure compliance with QA/QC procedures. Control and direct the process of placing re-bars.
3.Review and comment on formwork/shuttering systems/reinforcement and other key elements to ensure quality, safety and constructability aspects are met. Issue NCR (Non-Conformance Report) to any part of the work if not complying with the required quality.
4.Quantity determination, and cost estimates Perform observation, measurement and documentation of construction activities, material inspection including concrete and steel bars.
5.Preparing monthly and final progress reports. Conduct project reports.

Education:
1. 1997-2000 The University of Akron
M.S. in Civil Engineering, GPA =3.713/4.0
Thesis topic: Evaluation the mechanical properties of Palmyrah timber.

2. 1988-1993 Makeyevka Civil Engineering Institute
B.Sc. & M.Sc. in Civil Engineering, GPA= 3.85/4.0
Thesis topic: Design of 16-storey residential building.

Award Received:
Awarded the University of Akron assistantships, Department of Civil Engineering:
1.August 1999-May 2000 (US$ 20,790)
2.August 1997-May 1998 (US$ 14,250)

Highlights of Skills & Qualifications:

Computer Skills:
1.Terramodel 9.6
2.Culvert Master
3.AutoCAD 2000
4.Risa 3D 4.0.
5.STAAD III
6.MathCAD

Training & Workshops:
1.Space Control Panel Discussion, Black & Veatch Corporation
2.3D Control in Earthmoving, Black & Veatch Corporation.
3.Underground Design/Support, Black & Veatch Corporation
4.Excavations & Earthwork, Black & Veatch Corporation
5.OSHA 10 Hour Training Course in Construction Safety and Health
6.46th Annual Structural Engineering Conference, The University of Kansas
7.Voton Foam Concrete, AJ Voton LLC
8.Hydrophilic Double Locking Waterstops, Mitsubishi International Corporation, Adeka Ultra Seal.
9.Polyethylene Piping System, Driscpipe
10.Piping System, Phillips Petroleum Company
11.Overhead Cranes, Engineered Material Handling

Languages:
1.Fluent in English, Arabic & Russian Languages.
2.Basic in German Language.

Professional Membership:
1.Member of the American Society of Civil Engineers (ASCE)
2.OSHA Construction Safety & Health Certificate.
3.Confined Space Awareness Entry

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 2814)

Go to Search Parameters...

Brief Description

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Search for job in car or food industry.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

Fresh Graduate Civil / Project/ Site Engineer

I believe that my vast experiences in the various facets of construction organization entitle me as the suitable candidate for this position. My academic qualification, exposures and experience have given me an in depth working knowledge in overall functions of the Construction Project Management.

An enthusiastic self-starter with strong leadership and communications skills. proven academic and curricular achievements, and possess the right technical and soft skills required to propel the organization achieving its goals and objectives.

Project Manager

BHS Engineer

Mechanical engineer having 2 + years of experience in machine manufacturing , Solidworks being the design tool

I am an HVAC ENGINEER from India having good knowledge of Textile Air Conditioning, Pharmaceutical air conditioning , Clean Rooms, and Normal comfort air conditioning till date i have executed around 8000 TR of Jobs. presently working in United Arab Emirates as a Project Engineer.

LSIT, total 12 years of surveying

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

AutoCAD, Revit, 3D Animation

PLC programming,control design,piping,branch circuits.

Senior Instrumentation & Control Systems Engineer

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Erection & commissioning

mechanical engineer with 2.25 years experience in automotive field

Planning/scheduling, progress monitoring, procurement of project material, site coordination, progress reports and site co-ordination

QA/QC Engineer/Inspector

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

detailed engineering/design of offshore rigs and ships

Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.

KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si

Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects

•experience performing detailed design calculations for heat transfer systems, pressure vessels

I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh

15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar

i am a post graduate mechanical engineer with 8-9 years of working experience in HVAC field in international environment. can lead a team of supervisors and subcontractors. knowledgeable in working. presently working with the Italian M & E contracting company (elektrint limited in Nigeria.)

Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project

Experience in quantity surveying, site supervision, planning, designing over water and over land structures.

I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.

Looking for a position with an established engineering company, utilizing previously learned skills

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

EXPERIENCE PROFILE (7 YEARS)

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out