Resume - Project Management / Inspection / Procurement / Quality Assurance

Misco Jobs

Resume #52004

CONTACT INFORMATION:
View contact information...

Education
MS Mining Engineering - Mackay School of Mines, University of Nevada, Reno 1988
BS Geology - Guilford College, Greensboro, NC 1979

Skills
Project Management / Inspection / Procurement / Quality Assurance
For: Light Rail, Heavy Commuter & Freight Rail / Heavy Civil / Tunnels, Mines, Plants.

Experience
Resident Engineer/Inspector - Rail Technology, Inc., Sacramento CA - 2000 to Present. Design Manager for heavy commuter San Jose to Gilroy rail expansion project. Project Manager for rail and special trackwork procurement contracts. Served as Resident Track Inspector for construction of ballasted railroad track, grade crossings, special trackwork, direct fixation track on aerial structures and in tunnels. Routinely handle project schedules, contractor's submittals & RFI's.

Project Manager - The Bartley Corporation, Silver Spring, Maryland - 1998 to 2000. Managed concrete construction projects. Implemented the safety program, estimated jobs and developed proposals. Provided hands-on job supervision.

Resident Engineer - Rail Technology, Inc., Sacramento, CA – 1997 to 1998. Project Inspection, Developed Safety Certification and Quality Assurance Programs.

Quality Control & Heading Engineer - Kajima Kiska, JV, Washington DC. 1996 to 1997. WMATA Green Line tunnel project in Washington D.C. Inspected concrete, monitored ground control grouting. Supervised line/grade control in shield a driven, concrete segment lined tunnel in difficult ground.

Field Engineer - Tutor Saliba Perini - San Francisco, CA 1993 to 1996
Staff engineer on the MUNI Metro Turnback Project for the SF MUNI subway. Two 18-foot-diameter tunnels were driven by a soft ground shield under compressed air using bolted steel liner plates. Produced plans and implemented extensive traffic detours in a downtown setting. Field supervision of labor and sub-contractors performing line/grade control, installing storm water pumping system, remedial bolting of the underlying BART tube steel liner plates, chemical grouting and jet grouting, ground settlement instrumentation.

Field Engineer – Stacy & Witbeck/Dillingham - San Francisco, CA - 1992 to 1993. SF MUNI South Embarcadero Rail Extension Project. Supervised track construction.

Mining & Tunneling Project Engineer
Mine Development & Engineering Corp. - 1989 to 1992. Served various contracts:
Morrison Knudsen/American Girl JV - Yuma, AZ – Supervised construction of two longhole drill & blast ore transfer winzes;
The Irvine Company, Newport Beach, CA – Served design team and provided supervision for a bolted steel liner plate tunnel under the Pacific Coast Highway in difficult ground;
Riverside County Flood Control and Water Conservation District – Served design team and supervised construction of a steel plate/ CIP concrete lined water tunnel under the Rt. 91 freeway;
Magma Gold, Ltd., Tucson AZ. - performed Mine planning for the McCabe underground gold mine near Prescott, AZ;
Valley Engineers, Fresno, CA – Supervised installation of drilled anchor tie-backs for a 36" diameter hydroelectric inlet pipeline on a remote section of the North Fork Yuba River, CA;
US Geological Survey, Carson City, NV – Supervised horizontal drilling from a shallow shaft in desert alluvium for placement of instrumentation to monitor migration of radioactive isotopes from US Ecology's hazardous waste facility near Beatty, NV.
Metropolitan Water District of Southern California and San Francisco Water Department.
Served as the CAL-OSHA Safety Representative supervising gas testers for construction and rehab projects in tunnels classified gassy and potentially gassy.

Mining Engineer - Homestake Mining Company - Lead, SD 1988 -1990
Mine Planning Engineer in the underground & open cut divisions and in mill operations and maintenance.

Underground Miner and Mine Geologist - Western Mine Development, Kingston, NV. 1983 – 1988. While enrolled in the Mining Engineering Program at Mackay School of Mines, Reno, NV. Served as miner, shifter, ore control supervisor for underground projects in NV and AZ.

Exploration Geologist - General Mineral Development, Reno, NV. 1981 - 1983. Supervised surface drill rigs and underground sampling for developing gold properties near Eureka, NV. Conducted surface sampling and mapping of gold prospect properties in Nevada.

Engineering Geologist - Cooper & Clark Consulting Engineers, Gillette WY. 1979 - 1981. Supervised drill rig conducting soil borings for railroad bed upgrade, construction and coal mine projects.

Certifications and Affiliations:
Professional Mining Engineer #010628, State of Nevada 1994
Member AIME-Society of Mining Engineers, Past Chairman of San Francisco Chapter.
CAL OSHA Safety Rep. #S51 96 / CAL OSHA Gas Tester #G123 96
MSHA 40 HR Safety Training Underground Mining
MSHA Instructor, Nevada Division of Mine Inspection
CAL OSHA Blasters License #7364 General Underground
MSHA Mine and Tunnel Rescue Training
BART Contractor Safety Certification

Supplemental Statement of Experience - Recent Rail Projects
William D. Baker

August 2005 - August 2006 C111 – Rail Rehabilitation at 1st & San Carlos St. $1.9M
Track Inspector on furnish / install contract for 115RE special trackwork embedded in San Jose city streets. Reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Nortrak's manufacturing facility in Seattle, WA.

October 2001 – June 2005 C326 - Civil I SJ Diridon Station to Winchester $35.5M
Track inspector for installation of owner furnished rail and special trackwork for open LRT 115RE and Freight (second hand 133RE) track, paneled road crossings and a ballasted track bridge structure.

April 2002 – September 2003 C325 – Civil II Woz Way to SJ Diridon Station $17.7M
Track inspector for installation of owner furnished rail, special trackwork and DFF for open LRT track, paneled road crossings and a tunnel structure.

April 2001 – November 2003 May 2004 C225 – Capitol LRT Civil, Track &
Landscaping $48.1M
Resident Track Inspector for installation of owner furnished rail and special trackwork for open LRT track and paneled road crossings. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

January 2001 – May 2003 June 2004 C515 – Civil, Track and Landscaping (I-880 to
Hostetter) $22.9 M
Resident Track Inspector for installation of owner furnished rail, DFF and special trackwork for open LRT track, paneled road crossings and an aerial structure. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

April 2001 – December 2002 A110 – Concrete Ties $2.1M
Resident Inspector on procurement contract. Purchased ties for LRT 115RE rail to be used on various construction contracts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audit at CXT / LB Foster's manufacturing facility in Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – September 2003 A100 Running Rail $2.0M
Resident Inspector on procurement contract for new 115RE and second hand 133RE running rail and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's manufacturing facility in Seattle, WA. Inspected second hand 133RE rail at LB Foster's lay down facility in Bliss, Id. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – November 2002 A105 – Special Trackwork $2.2M
Resident Inspector on procurement contract for special trackwork, wood ties, concrete crossing panels and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's and CXT/LBF's manufacturing facilities in Seattle and Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

June 2000 – May 2002 A324 – Special Trackwork for Woz Way/San Carlos $485K
Resident inspector on procurement contract for special trackwork. Purchased rail, DFF and OTM for an embedded LRT 115RE half-grand union. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Chicago, IL.

November 2000 – April 2001 A322 – Special Trackwork SJ Diridon Tunnels $127K
Resident Inspector on procurement contract for special trackwork. Purchased rail and OTM for 136RE freight/commuter rail turnouts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Pueblo, CO.

January 2000 – July 2000 C510 – Civil, Track & Landscaping (Zanker to I-880) $7.9M
Track Inspector for installation of owner furnished rail and special trackwork for open and embedded LRT track.

January 2000 – April 2000 A822 – Special Trackwork (Zanker to I-880) $200K
Resident Inspector on contract to procure special trackwork – LRT 115RE curved crossover – from Progress Rail Services. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Progress Rail Services manufacturing facility in Sherman, TX.

March 1998 A810 – Running Rail $1.8M
Track inspector for procurement of 115RE rail and special trackwork. Inspected unloading and stacking. Conducted shop inspection and QA audit at Progress Rail Services DeCoursey manufacturing facility in Covington, KY.

March 1998 A840 – Concrete Ties $1.3M
Track inspector on procurement contract. Inspected unloading and stacking of Rocla ties made for various LRT projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 3092)

Go to Search Parameters...

Brief Description

To apply a position as an Electrical Engineer

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Power Plants Commissioning , Operation, HRSG Commissioning

I am a Diploma in Electrical and Eletronics Engineer with 3years experience in the field of Electrical Cad Designing and Electrical Control Panel Wiring, i do have knowledge in system administration and Primavera Project Planner.

Have a working knowlege of setting up total stations, performing traverses, level loops, topos, and drafting with Land Development Desktop

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

Surveyor with diploma and 3 years of wide range of professional experience

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

CAD/CAM engineering

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Of late brilliantly completed the scheduled Training in Calibration, Testing and Conformity Assessment from RTC(ER), Govt. of India

I am a young ,dynamic, smart having a good percentage degree of production engineer.

I am Civil Engineering graduate and having three years experience in the construction field.

I have a three years experience as an auto electrician and heavy equipment mechanic for Trident Transport Company in Abu Dhabi. I am looking for same kind of job in Abu Dhabi or in Europe, like Netherlands, Belgium or Germany.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Logistics, Procurement and Materials Manager (Supply chain)

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

Summary An enthusiastic, Postgraduate Civil engineer with 2 years and 2 months of experience in the design, Engineering and Construction of Industrial, infrastructure and Multi storied Buildings, Eager to learn new technologies

recent chemical engineering graduate with 2 years of work experiences including R&D and industrial experiences. Experiences in pilot plant operations, bench tests, process engineer

I am a self-motivated, determined and organized individual who strives to perform any task to the best of my abilities. I have a strong background in 2D and 3D drafting, design and modelling and am capable of producing accurate and high quality drawings in a fast paced environment.

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out