Resume - Willing and able to perform ones job with less supervision

Misco Jobs

Resume #52742

CONTACT INFORMATION:
View contact information...

POSITION APPLIED FOR: Telecommunications Engineer / Any Position Fits my Qualification

SUMMARY OF QUALIFICATIONS:

* Over six years of Engineering exposure in Telecommunication Industry on database handling of Private-Access Branch Exchange (PABX), Multiplexers (MUX), Microwave and UHF Radios (MWR/UHF), Power Line Carrier (PLC) and Protection Signaling Equipment (PSE) for Power Transmission Industry.

* Highly skilled and highly competent in the installation, testing and commissioning of Telecommunication Equipment including Multiplexers (MUX), Power Line Carrier (PLC) and Protection Signaling Equipment (PSE) for the Transmission Lines and Submarine Cables. Also exposed in actual Fiber Optic Splicing and Testing for both single mode and multi-mode fibers as well as proper handling and safekeeping of the Fiber Optic Splicer, kits and accessories.

* Familiar with IMS (Integrated Management System) standards, Total Quality Management, KAIZEN, Benchmarking, Reengineering, Forecasting, Qualitative and Quantitative Management.

* Certified Cabling Test Equipment (CCTT)

EDUCATIONAL ATTAINMENT (GRADUATE SCHOOL)
Name of School………………….……………CEBU STATE COLLEGE of SCIENCE TECHNOLOGY
Address………………………………………..R. Palma Street, Cebu, City, Philippines
Year Graduated……………………………….Currently Studying
Degree Earned………………………………..Doctor of Philosophy in Technology Management (Ph.D.-TM)
Total Number of Units of Education…………48 units

EDUCATIONAL ATTAINMENT (GRADUATE SCHOOL)
Name of School………………….……………CEBU STATE COLLEGE of SCIENCE TECHNOLOGY
Address………………………………………..R. Palma Street, Cebu, City, Philippines
Year Graduated……………………………….June 2006
Degree Earned………………………………..Master of Science in Industrial Technology (MSIT)
Total Number of Years of Education………..2 Years

EDUCATIONAL ATTAINMENT (COLLEGE)
Name of School………………….……………CEBU INSTITUTE OF TECHNOLOGY
Address………………………………………..N. Bacalso Avenue, Cebu, City, Philippines
Year Graduated……………………………….March 2000
Degree Earned………………………………..BS Electronics and Communications Engineering (BSECE)
Total Number of Years of Education………..5 Years

EDUCATIONAL ATTAINMENT (VOCATIONAL/TECHNICAL)
Name of School………………….…………...The SISTERS of MARY SCHOOL (Boystown)
Address………………………………………..Poblacion, Talisay City, Cebu, Philippines
Year Attended…………………………………June 1991-April1992
Degree Earned………………………………..Certificate (Automotive Technology)
Total Number of Hours of Education……….657 Hours

Name of School………………….…………...The SISTERS of MARY SCHOOL (Boystown)
Address………………………………………..Poblacion, Talisay City, Cebu, Philippines
Year Attended………………………………...June 1992-April1993
Degree Earned………………………………..Certificate (Electronics Technology)
Total Number of Hours of Education……….425 Hours

Name of School………………….…………...The SISTERS of MARY SCHOOL (Boystown)
Address………………………………………..Poblacion, Talisay City, Cebu, Philippines
Year Attended………………………………...June 1993-April1994
Degree Earned………………………………..Certificate (Refrigeration and Air-conditioning Technology)
Total Number of Hours of Education……….657 Hours

EDUCATIONAL ATTAINMENT (HIGH SCHOOL)
Name of School………………….……………The SISTERS of MARY SCHOOL (Boystown)
Address………………………………………..Poblacion, Talisay City, Cebu, Philippines
Year Graduated……………………………….March 1995
Degree Earned………………………………..Diploma (Secondary)
Total Number of Years of Education………..4 Years

EDUCATIONAL ATTAINMENT (ELEMENTARY)
Name of School………………….……………POOC ELEMENTARY SCHOOL
Address………………………………………..Pooc, Talisay City, Cebu, Philippines
Year Graduated……………………………….March 1991
Degree Earned………………………………..Diploma (Elementary)
Total Number of Years of Education………..6 Years

Total Number of Years of Education………………17 Years
(From Elementary, High School/ Vocational, College & Graduate Studies)

COLLEGE SCHOLARSHIP GRANT
Name of Scholarship………………….Cebu Tertiary Assistance Education Program (CTEAP)
Sponsored by…………………………Cebu Provincial Capitol
Address………………………………Cebu City, Philippines
Date…………………………………...June 1995-March 2000

GOVERNMENT LICENSURE EXAMINATION TAKEN
Electronics and Communications Engineering Board Examination – PRC License 0023547
WORK EXPERIENCE:

EMPLOYMENT DATE………..April 1, 2004 - Present
ADDRESS……………………...Network Telecom Services Division – Visayas System
Operations (NTSD–VSO), Banilad Power Complex, Nasipit Talamban, Cebu City, Philippines
COMPANY NAME…………….National Transmission Corporation (TransCo)
COMPANY PROFILE………..Serves the Nation in providing reliable transmission of quality Electricity to all its stakeholders and consumers (Power Transmission Corporation).

JOB TITLE...……………………Senior Engineer

DUTIES & RESPONSIBILITIES:

The Sr. Engineer, Integrated Telecom Services (WEST), is responsible for the operation and maintenance of Digital and Analog Microwave/UHF radios, VHF/UHF Radio Transceivers. Digital Multiplexer Equipment, EPABX and Terminating Equipment, Power Line Carrier (PLC) and accessories. Protection Signaling Equipment (PSE). Facsimile (FAX) Machine, including antenna installations, waveguides, cables, fiber optics and other accessories. Also involved in the Telephone Inside and Outside Plant Maintenance.

1.1 Undertakes the implementation of all TELECOM works involving Multiplexers (Access 60, DCB 24, FOX 515/512, DACCS, NORTEL TN1X/TN4X), Power Line Carrier and Protection Signaling Equipment including installation, testing, commissioning and maintenance of all telecom equipment.

1.2 Preventive Maintenance and Housekeeping of Telecommunication Equipment.

1.3 Necessary Corrective Maintenance and Troubleshooting of various Telecommunication Equipment.

1.4 Wiring, testing and commissioning of various Telecommunications Equipment and accessories.

1.5 Proper safekeeping and handling of tools, test measuring Instrument/equipment and accessories utilized in Preventive and Corrective Maintenance.

1.6 Documentation of test/maintenance and troubleshooting procedure and results.

PERFORMS:

1.1 Replacement/revisions in the Telecommunication Network.
1.2 Testing of Overall Telecommunication System.
1.3 Analysis/troubleshooting of equipment/system.
1.4 Performs other duties that may be assigned.
EMPLOYMENT DATE………..December 1, 2003 – March 31, 2004
ADDRESS……. ………………Mercedes Arcade, A. C. Cortez, Mandaue City, Cebu,
Philippines.
COMPANY NAME…………….Pneumatic Technologies Inc.
COMPANY PROFILE………...Supplier of high end compressors (for compressed air requirements), filters and dryers.

JOB TITLE..……………………Sales/ Service Engineer

DUTIES & RESPONSIBILITIES:

* as service Engineer, Conduct Preventive and Corrective Maintenance activities on SULLAIR MACHINES (rotary and screw type), ELLIOTTE and ATELIERS FRANCOIS COMPRESSORS (centrifugal type). ALSO, REFRIGERATED dryers, AIR DRYERS and filters.

* as sales Engineer, submits and follow up quotation for Purchase Requisition and Purchase Order. Responsible for the delivery of all purchased products to the customers. Also attend bidding to different manufacturing companies.

EMPLOYMENT DATE………..July 17, 2000 – January 27, 2003
ADDRESS……. ……………….San Carlos Heights, Quiot Pardo, Cebu City, Philippines
COMPANY NAME……………..Liberty Telecoms Inc.
COMPANY PROFILE……….Telecommunications Service Provider which includes Telephony Services, Leased lines and channels.

JOB TITLE...……………………Network Operations (SCADA): Switch and Data
Engineer (January 21, 2002 – January 27, 2003)

DUTIES & RESPONSIBILITIES:

* Responsible for the installation, testing and commissioning of PABX Systems in Operation and Maintenance and database handling.

* Circuit activation and Modifications order implementation.

* Database configuration, controller cards and back – panel dipswitches, EPROM programming and performed preventive/ corrective maintenance on IMS-APR and PR, Multiplexers and other Telecom equipment.

* Telecom Equipment Handled: TCS-100 (Monitoring Systems) PABX (STAREX-IMS APR & PR), Multiplexers.

* Coordinate with the field personnel on site during installation, testing and commissioning of all telecom equipment and especially during troubleshooting of the Network when there is a failure that occurs.
EMPLOYMENT DATE………..July 17, 2000 – January 27, 2003
ADDRESS……. ……………….San Carlos Heights, Quiot Pardo, Cebu City, Philippines
COMPANY NAME……………..Liberty Telecoms Inc.
COMPANY PROFILE……….Telecommunications Service Provider which includes Telephony Services, Leased lines and channels.

JOB TITLE...……………………Network Operations: Management and Support
Engineer (July 17, 2000 – January 20, 2002)

DUTIES & RESPONSIBILITIES:

* General monitoring, documentation and visualization of the Visayas Network.

* Activation / Deactivation of Subscriber Unit via Computer Operated Switch Terminal (COST).

* Radio Based Station host configuration, Node host configuration, Voice Mail Services and Validation PC Configuration.

* Conducts daily site query to all repeater stations within the Visayas Network and then generate Daily Site Status Report to the different department concerned.

* Coordinate Maintenance Personnel when system failure or link failure occurs.

* Performs Preventive and Corrective Maintenance Activities on all Telecommunications Equipment within the station/Node.

COMPUTER SKILLS INCLUDING SOFTWARE
Microsoft Office, AutoCAD 2002, MS VISIO, Adobe Photoshop, MS Project and the various software used in TELECOMMUNICATIONS system application.

SPECIAL SKILLS
* Fiber Optic cable splicing and testing.

* Telecom equipment installation and handling/maintaining.

* Indulged in actual Installation, testing and commissioning of Power Line Carrier Equipment (Analog and Digital) wherein 138 KV transmission line was used as its transmission medium.

* Exposed with the different Protection scheme/commands and the Protection Signaling Equipment (PSE) used in protecting the transmission line and submarine cable in any disturbances.

* Can drive a two/ four-wheeled vehicle and owns a driver's license.

* Can work with less supervision and has a sense of responsibility.
EQUIPMENT USED RELATED TO WORK EXPERIENCE
* Hewlett Packard Protocol Analyzer (used in testing and measuring the integrity data)
* Hewlett Packard Transmission Measuring Set (TMS)
* Hewlett Packard Bit Error Rate (BERT) E1 AND T1 Tester
* Wandel and Goltherman Level Meter and Signal Generator (used in Power Line Carrier equipment)
* Optical Power Meter
* Optical Fiber Scope
* Sumitomo Electric Ind. Type 37SE Arc Fusion Fiber Optic Splicer
* Agilent E6000 Optical Time Domain Reflectometer
* Hewlett Packard 8592 D Spectrum Analyzer
* Anritsu Microwave Frequency Counter MF2412B
* Hewlett Packard 54602A Oscilloscope
* Analog and Digital Multi-tester

SEMINARS / TRAINING COURSES ATTENDED

* Title: CHIPS (COMPETENCE, HONESTY, INTEGRITY and PUBLIC SERVICE)
SEMINAR
Date: November 18, 2005
Conducted by: National Transmission Corporation (TransCo)
Address: Nasipit Talamban, Cebu City, Philippines

* Title: SEMINAR ON TELEPHONY and TELECOMMUNICATIONS
Date: March 19, 2005
Conducted by: IECEP-TESDA
Address: Archbishop Reyes Ave. Lahug, Cebu City, Philippines

* Title: SEMINAR ON CELLULAR MOBILE COMMUNICATIONS
Date: March 19, 2005
Conducted by: IECEP-TESDA
Address: Archbishop Reyes Ave. Lahug, Cebu City, Philippines

* Title: SEMINAR ON MECHATRONICS
Date: March 19, 2005
Conducted by: IECEP-TESDA
Address: Archbishop Reyes Ave. Lahug, Cebu City, Philippines

* Title: SEMINAR ON SEMICONDUCTOR MANUFACTURING TECHNOLOGY
Date: March 19, 2005
Conducted by: IECEP-TESDA
Address: Archbishop Reyes Ave. Lahug, Cebu City, Philippines

* Title: TRAINING in COMPUTER AIDED DESIGN (L-1)
Date: January 17, 2005 – February 4, 2005
Conducted by: MIAP-TESDA
Address: Archbishop Reyes Ave. Lahug, Cebu City, Philippines

SEMINARS / TRAINING COURSES ATTENDED

* Title: SAFETY ORIENTATION SEMINAR
Date: July 9-13, 2004
Conducted by: National Transmission Corporation (TransCo)
Address: Nasipit Talamban, Cebu City, Philippines

PERSONAL DETAILS
Age: 29 years old
Status: Single
Citizenship: Filipino
Date of Birth: February 17, 1978
Place of Birth: Manticao, Misamis Oriental
Religion: Roman Catholic
Height: 5'4"
Weight: 130 lbs.

LANGUAGE SKILLS
English, Tagalog and Bisaya

CHARACTER REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 2856)

Go to Search Parameters...

Brief Description

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Expert for OSP Survey, Planning, Design, Implementation and coordination

Over 15 years international experience in ectromechanical, power transmission OHL and Cable Engineer

I have varied Experience of Project management & Execution of RCC framed structured high-rise Petrochemical building, Power plant Buildings, Heavy Rotating & static Equipment foundations, erection of related equipments, refinery civil & steel structural works etc.

Mechanical Engineer, Engineering Management, Project Engineer, Reengineering, TQM, Activity Based Accounting System, Production Planning & Scheduling, Budget Controlling, ARIS Toolset, Access

12 years experience in controls design and project management of complex automated systems.

PERSONAL EXPERIENCE(9 YEARS )

I would like to apply for a senior /executive position of highway /infrastructure projects

i am working as a TPI inspector in welding,piping,tankages,structural,vessels ect. and my basic qualification is DME and additional qualifications are AWS CWI, ASNT Level II in RT,UT,MP and DPT

As a Principal Process Engineer, supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

I am presently working as a procurement coordinator since may 2002. projects include OLG PROJECT in oman and Pearl GTL Project in qatar. Prior to that, i was a quantity surveyor from august 1996 to april 2002

A. CIVIL STATUS DATAS

Engineer for Power System Analysis, SCADA/EMS chief engineer

Civil surveying engineer can work as cheif surveyor & site manager

Civil/cad engineer, structural steel detailer

EXPERIENCED METASWITCH tECH. wORKED WITH 3510 AND 2510'S CALL AGENTS, EMS SERVERS, WEB SERVERS AND OTHER UC9000 TYPE VOICE MAIL SYSTEMS.

Design and construction in bridge and road

Having 14 years of Drafting work experience in Steel structures, Civil, Architectural and Mechanical layouts, Worked as a Engineer cum Draughtsman in Industrial and Residential Construction Projects In various Platforms like high raised buildings, Factory plants, Emergency shelters, Pumping Stations

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Civil Design and Engineering specialist Highways, including design standards, Geometric design, Horizontal & Vertical alignments, Detailed Estimations, Bid Evaluation, Design Drawings, Coordination with client, Preparation of PDR and Feasibility Reports, Pavement Design, Traffic Surveys, Data Analys

Diploma Mechanical engineering Pipe fabrication, erection Supervison manpower

QA/QC ENGINEER

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

Senior Chemical Integrity Engineer

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

Mechanical engineer (naval welding) with 15 years experience seeking a job as supervisor(superintendent engineer).

Over 7 years experience of mechanical works in offshore and onshore in various project such as oil and gas plant / LNG gas plant / cement plant (industrial and commercial facilities).

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Experiences on civil construction works and i hope it'd be tasteful and challenging.

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Expericiend All around AutoCad Tech

Installation , testing, commissioning , trouble shoot and maintenance of HT, LT control panels, substation 33KV, Transformers 4MvA, weigh feeders, PLC, Ladderlogic, Level switches, VVVF drives,bag filling weighing systems, HT , LT motors,relay logic panels etc

I am a civil engineering graduate with a post graduate diploma in construction Management. An expert in Primavera [3.1/5.0] project planning, I have total work experience of @ 6 yrs of which @ 4 yrs in Dubai now.Currently handling the project planning & monitoring of a $250 million airport project

Project Manager Mechanical Engineer Construction Management Quality Assurance Repair Maintenance Contract Management

Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.

A result oriented professional with 18 years of international exposure in the field of Projects / Construction division . Fire detection , alarm

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

Supervising the Production staff to make sure of high productivity and efficiency.

I am a qualified mechanical Engineer specialized in Acoustics

Testing,repairing and troubleshooting electronics down to component level.

Planning & Scheduling, Construction

OBJECTIVE: A Management/Field Position in Civil Engineering or Construction Management.

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out