Resume - HSE Officer with a background of over 19 years in handling safety, Health and En...

Misco Jobs

Resume #57114

CONTACT INFORMATION:
View contact information...

Career summary: HSE Officer with a background of over 20 years in handling safety, Health and Environment. 11 years in oil and gas (Caltex refinery) working as safetyman/firewatch for process operation and construction services. More than 8 years in Heavy construction (industrial, power plant, petrochemical, marine facilities and fabrication), including Project Management Consultancy.
I have principally been involved in the overall in-charge in the aspect of safety/risk management on some of my previous employment and required working closely within the senior management of the organization. Worked effectively in different environments and cultures with efficient leadership, management and inter-personal skills.

Qualifications:
Accredited Safety Practitioner by the Local Department of Labor and Employment # 1033-386
Certified First Aider by the National Red Cross
Computer Literate (MS office, Excel, power point)
More than 19 years in the field of Safety Health and Environment.

Professional Experience:
Current:
February 2008 to September 2008: Employer: Worley Parsons
Area HSE Advisor EPCM
EMAL Project, Al Tawella Abu Dhabi (SNC-LAVALIN, WORLEY PARSONS)

Responsibilities: Reporting to the HSE Manager. Manage/supervise Contractors HSE personnel onsite. Review/inputting comments on Risk Assessment/Job Safety Analysis of Contractors. Conducting HSE induction. Site Monitoring. Correcting unsafe acts and unsafe condition on the spot. Site HSE inspection/ audit deficiencies to converge local and international standards. Monitoring and inputting topics on toolbox meeting.

February 2006 – To July 31, 2007: Employer Worley Parsons
Sr. HSE Engineer PMC/PMT
Condensate Storage Tanks Project: TAKREER Refinery, Ruwais, Abu Dhabi
Responsibilities:
Responsible in overseeing Main Contractor and sub-contractors compliance to Company's HSE Management system. Providing HSE guidance and recommendations to the Project Management Team. Review and comments of all HSE documents of the main Contractor including methods of statement of different work activities. Responsible for the Health, Safety, Loss Prevention, Fire Protection and Environmental Protection of the project. Identifying and managing all risk to a level which is as Low As Reasonably Practicable. Advising Contractor required HSE raining for construction and commissioning activities. Attending weekly site construction progress meeting. Presiding HSE Coordination meeting. Weekly Site HSE Auditing including Camp facilities. Daily site monitoring, correcting unsafe acts/condition on the spot. Supervising EPC Contractor and sub-contractor HSE personnel on site. Monitoring and inputting safety observation on toolbox meeting. Requiring and reviewing Contractor's JSA for any hazardous activity. HSE induction. Ensuring that all Near Miss Incidents have been reported, recommendations being implemented. Incident/Accident investigation. Work Permit System. HSE documentation. Ensuring / Initiate implementation of lock-out/tag-out procedures during Pre-Com and Commissioning activities. HSE audit punch listing after mechanical completion.

7/21/'04 – 04-21-2005 Employer E. PIHL & SON A.S. Safety Manager
Dock Construction Project: EG LNG Marathon Project, Bechtel International, Malabo, EG
Responsibilities:
Reporting to the site manager. Responsible for the overall in charge in the Safety, Health and Environment program of the company. Ensuring compliance to the Client HSE policy. Responsible for selecting/ordering appropriate PPE and safety equipment for work activities. Responsible for rigging equipment inspection and color coding. Educating/conducting toolbox talks to all employees. Monitoring site operation. Correcting unsafe acts/unsafe condition on the spot. Developing ESH guidelines/procedures. Advising line supervisors for noted ESH deficiencies for necessary mitigating procedures. Developing JAS/Risk assessment. Hazard identification plan for each activity. Preparing safety statistic reports and HSE documentation. Attending progress/safety meeting with the client. ESH promotion/awareness.

3/11/'04 – 6/18/'04 Employer – Petrofac International Ltd. (Sharjah, Dubai) HS Supervisor
JV AGT Pipeline Project (Georgia, T;bilisi)
Responsibilities: Responsible for the first line safety and health coverage on the construction site. Reporting to the HS manager.

9/8/'03 - 10/15/'03: Employer - Bechtel Overseas Corporation (Philippines) ESH consultant.
Project ESH Study of Hitachi Plant, Laguna, Philippines
Responsibilities: Inspect/audit all areas of the Plant facilities, process system including construction activities for ESH deficiencies. Develop/recommend safety measures and procedures for ESH deficiencies to meet local/international requirement.

6/'03 - 8/03: Employer - Petrofac International Ltd. (Sharjah, Dubai) HSE Supervisor
JV AGT Pipeline Project (Georgia, T'bilisi)
Responsibilities: Reporting to the project safety manager. Responsible for the safe operation of all heavy equipment operating on site. Conducting toolbox meeting. Site monitoring/safety observation. Supervising contractor's safety representative. Risk assessment/job safety analysis. Assist/monitoring for the safe operation of blasting activity. Responsible for the implementation of color-coding system for tools/equipment. Attending weekly project safety meeting. Correcting unsafe acts/conditioning on the spot. Advising contractors for work safety procedures.

5/'02 - 11/'02 – Employer: Mitsubishi Heavy Industries. Safety Manager
Boo Project, Curacao Netherlands
Responsibilities: Reporting to the site manager. Coordinating with the local government officials during site inspection. Responsible for the over-all site safety, health and environmental implementation and enforcement. Developing/performing hazard identification plan on each work activities. Supervising contractor's safety representative. Presiding weekly project safety audit meeting with company's managers and contractor's managers. Daily safety patrol.. Responsible for the implementation and development of work permit system (lock out – tag out procedures, confined space permit/procedures, hot/cold work permit, excavation etc).. Incident/accident investigation and its preventive measures. Conducting/monitoring toolbox safety meeting. Site monitoring and issuing field observation report to contractors for rectification. Correcting unsafe acts/conditions on the spot. Responsible for the implementation of safety procedures related to start-up activities. Conducting safety training. Emergency response procedures. Monthly safety statistic HSE documentation and developing safety promotions. Attending weekly/monthly meeting with the client.

12/'01 - 2/'02 - Employer: International Skill Development (Philippines) Safety Advisor
Overseas Employment Agency
Responsibilities: Conduct training on all employees including top management on Office Safety and Risk management that includes office related injury/illness, workstation ergonomics, office electrical safety, fire safety and emergency preparedness, environmental health, first aid, hazardous waste disposal. Safety auditing and recommendation of office unsafe condition and work practices. Developed Safety Manual Plan for instructional guidelines of the company.

4/2000 - 4/2001 - Employer: Jal International Corporation (Jubail, K.S.A.) Project Safety Officer
Kemya Major Projects (SABIC) Construction/Start-up/Maintenance
Responsibilities: Overall in-charge in the aspect of safety/risk management with different nationalities employed. Reporting to the Project manager, Client representative and client Safety coordinator. Responsible for the development of project site safety program. Preparing/conducting toolbox safety meeting relevant to day-to-day activities to all employees. Conducting safety orientation on all employees prior to start work. Presiding weekly safety meeting to all supervisors. Advising/selecting necessary PPE required on the project site. Daily safety auditing/observation and monitoring activities (anticipating, identifying and evaluating hazardous conditions and practices) around the plant site and its recommendation. Implement, administer and advising others on hazard control and hazard control programs. Incident/accident investigation, its analysis and preventive measures. Safety statistic report. Work permit system. Job hazard analysis. Hazardous materials training (MSDS). Emergency response procedures.

3/98 - 4/99 - Employer: Bechtel Overseas Corporation (Philippines) ESH Representative
Quezon Power Plant (Mauban Quezon) Construction/Start-up Project Management
Responsibilities: Assist/reporting to the ESH manager in implementation/enforcement of company's Safety, Health & environmental program. Supervised contractor's safety representative in monitoring, enforcement and application of work safety procedures, health and environmental compliance policy. Periodic safety walk-thru with the contractor's safety personnel. Daily safety auditing (measures, audit and evaluate the effectiveness of hazard control program). Holding/presiding weekly safety meeting with the contractors. Conducting brief training as required for special work assignment. Incident/accident investigation, its analysis and preventive measures. Work permit system.

7/97 - 2/98 - Employer: John Holland Construction (Philippines) Project ESH Officer
Quezon Power Plant (Marine Facilities construction and Fabrication)
Responsibilities: Overall in-charge in the aspect of safety management of the project site. Reporting to the Project manager. Developing/upgrading project sites ESH & Security rules and policy. Developing hazard control methods, procedures and programs. Anticipate, identify and evaluate hazardous conditions and practices. Motivating/educating supervisory level in safety implementation/ enforcement. Safety orientation to all new and old employees including sub-contractors. Supervising safety personnel in different areas of work activities (construction and fabrication sites). Advising/selecting required PPE. Attending progress meeting. Safety statistic report. Accident/incident investigation, its analysis and preventive measures. Daily safety auditing/observation. Emergency preparedness. Safety incentive program.

6/96 - 1/97 - Employer: Fluor Daniel Pacific Inc (Philippines) Safety Officer
Analog Devices project (General Trias, Cavite) Construction/Start-up)
Responsibilities: Reporting to the Safety manager. Safety orientation to all employees and contractors. Enforcement/implementation of company's safety program. Supervising contractor's safety officers in application of work safety procedures. Preparing/monitoring toolbox meeting of contractors. Safety auditing and its recommendation. Presiding weekly safety meeting with the contractors discussing noted deficiencies on work sites. Attending progress meeting. Incident/accident investigation, its analysis and preventive measures. Safety statistic report. Safety incentive program.

10/95 - 1/96 - Employer: Inter Conglomerates Inc. (Philippines) Project Safety officer
Stephan Philippine Project (Bauan, Batangas) Electrical/Instrumentation
Responsibilities: Reporting to the Project manager. Implementation/enforcement of Client and company's safety program. Preparing/conducting toolbox safety meeting. Daily safety auditing/monitoring (correcting unsafe acts/practices on the spot). Attending progress meeting. Incident/accident investigation, its analysis and preventive measures.

5/94 - 6/95 - Employer: Femsco Industries (Philippines) Project Safety officer
Batangas De Bottlenecking Project (Caltex Refinery, San Pascual Batangas) Electrical Contractor
Responsibilities: Reporting to the Construction manager. Safety orientation. Conducting/preparing toolbox safety meeting. Monitoring/application of work safety procedures. Attending progress meeting. Safety inspection/hazard detection. Rectifying noted unsafe acts/condition on the spot. Work permit system. Incident/accident investigation, its analysis and preventive measures. Safety statistic report.

11/87 – 1994 - Employer: Prodetech Philippines Safetyman / Firewatch
Construction/Maintenance Services (Caltex Refinery, San Pascual Batangas)
Responsibilities: SafetyMan/firewatch during construction and maintenance activities. Studying all work areas, operating methods and practices. Enforcement on the right use of PPE for all types of activity. Reviewing work permits (confined space, hot and cold work, excavation, etc) prior to start work. Stops unsafe act, reporting unsafe condition and rectifying it. Reviewing the hazards on the work site and make necessary action for accident and fire prevention. Monitoring hazardous/changing conditions (H2s, overflowing of tanks, vessels, leaks and other that were immediate danger to life and health). Incident/Accident investigation, its analysis and preventive measure. Maintaining clear access/ space to all fire fighting equipment at all times.

1982 – 1986 - Employer: Conrado H. Alcasid Refining Process (Philippines) Safetyman/Firewatch
Construction/Maintenance Services (Caltex Refinery, San Pascual, Batangas)
Responsibilities: Same as above (Prodetech Philippines) New management
Training/Seminars:

First Aid at Sea February 1, 1984
Fire Fighting January 22, 1984
Personal Survival at Sea January 29, 1985
Symposium on Fire Safety May 17, 1994
Modern Safety Management June 9-10, 1994
Construction Safety October 6-7, 1994
Occupational Safety & Health November 18-22, 1994
Cardio Pulmonary Resuscitation
And Basic Life Support August 3, 1996
Chemical Safety February 22-23, 1996
Loss Control Management January 27-31, 1997
ESH Management system Overview April'98
Microsoft Office '97 September 15-October 18, 1999
First Aid and Basic Life Support April 23-27, 2001
Combine Sea Survival
& Offshore Safety Procedure
Helicopter Underwater Escape training May 26 – 27, 2003
Basic Fire Fighting &Self Rescue SRIBIMA MARITIME TRAINING CENTER SDN BHD
Miri Sarawak, East Malaysia
Accident Injury Free April 2004, T'bilisi Georgia

Education: B.S. in Marine Transport 1976-1979 Lyceum of Batangas Philippines
Others: SSS # 03-5872220-5 Tin # 198-218-410 Weight 72 Kg. Height5'6"
Excellent health Passport # QQ0503277 Exp. 09-June-'10
Personal references and supporting documents will be supplied upon request.
Point of origin: Philippines

References:
Will be provided as per request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 3125)

Go to Search Parameters...

Brief Description

Application of specialized softwares for engineering design with opportunities in project leadership

Looks forward to a challenging career as a Engineer in Oil, Gas, Petrochemical, Fertilizer, Power, Nuclear and Chemical related heavy process equipments fabrication, machining and Construction industries. In depth knowledge in Construction industries and process industries.

Civil engineer who is familiar with all aspects of concrete and steel structures, design and analysis , high rise building , finite-elements method and last software packages in structural analysis. Executive sector of the great projects for water distribution and its related pumping stations

Career Objective I am looking forward to develop my academic background and career related experience in Construction field.

Ingegnere Meccanico, laureato a Pisa con Master of Science in Metallurgical and Materials Engineering dalla Colorado School of Mines, Golden, CO USA. Italiano come madre lingua, ottimo Inglese, Francese, Tedesco e Spagnolo colloquial

University rate and degree of the master on a specialty «Construction of mines and underground building», specialization – underground - construction. Participated in development and a substantiation of a new way of construction of some sites of the underground in Donetsk region.

Structural Design engineer M. Tech(Structures)having more than 4.0 years experience of designing RCC and Steel Building. Having knowledge of Structural software STAAD PRO etc. Having exposure of Indian & USA based codes like IBC-2000. Having experience in pre-engineering bldg & conventional.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction,

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

certified QC inspector with 4 plus years of experience, handling all stage inspections of piping, vessals,structruals. welding inspection , familiar with international codes and standards

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Conducting different jobs related training, Conducting Safety Tool Box training, preparing risk assessment and method statements for critical and high risk activities. Inspection of Rigging and Lifting tool and monitoring for safe rigging operations. Giving basic training to employees on fire fighti

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

Scaffolding coordinator-supervisor and Safety manager

Three year full time diplome in Mechanical Engineering and have six year experience in Repair and Maintenance of heavy earth moving equipments

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Inspection of Welding/Painting/Piping/Pipeline Activities

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Computer Knowledge: ArcGIS, MapInfo, Encom-Discover, Plaxis2D, Plaxis 3D foundation, 3D Tunnel, CESAR-LCPC, C-Tunnel, and Geo5 softwares. Qualifications: M. Tech ¡V Rock Engineering & U/g Structures i.e., Geotechnical Engineer, Civil, IIT Delhi

OSHA certified EHS Engineer with 3.5yrs experience

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

I ama Graduate Quantity Surveyor currently working in Dubai asa Project Quantity surveyor

Piping & pipeline constructions

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

I offer a Civil Engineering background specialized in Soil Mechanics and Foundation Engineering with a total of four years of working in various projects in India.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Civil/Structural Designer with over 12 years professional experience

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV ,MarkVI,Woodward and Bachmann PLCs; COAX cable test a

civil draughtsman with 1yr and 8 mths exp. well experienced in structural steel, fabrication drg, r.c.c drg, architectural drg, working with german eng.. company uhde india pvt ltd as a sub contracter mumbai no.1 construction co, having round abt 100 branches world wide

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Construction Engineer, Commissioning Engineer, Instrumentation Designer, Field Engineer, Construction Coordinator, Lead I/E Designer, Instrumentation Design Supervisor, Instrument Engineer, Project Engineer, Pipeline Block Valve Engineer - these are some of my more recent job titles.

I have an N4 qualification in civil engineering, passed two courses in N5, registered two courses in N5, experience in building, road construction, and riggeriing.

I have over 3 years experience in drafting and I am well versed in structural and architectural design. I have considerable experience coordinating and executing projects with engineers and contractors and have a thorough knowledge of drafting processes and procedures. I work well with people and en

AutoCAD, Architectural, Instrumentation Drafting, Civil Drafting, Pipe Drafting, CadWorx

Nuclear Operations Supervisor. Supervised operations ensuring safety of personnel and equipment. Supervised maintenance operations on I&C equipment.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

qa/qc engineer (E&I),6years experienced

Please consider this letter as an application for employment within your company. I wish to apply for the position as HVAC ENGINEER /Design Drafter/Quantity surveyor that will give me an opportunity for growth and career challenges particularly in the areas of design engineering and technical drafti

Land Surveying, Setting Out, GIS, Cadastral, Photogrammetry, Remote Sensing, CAD

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Estimation, Quantity survey, planning, design

Level II certificate in PT,RT,MT and UT..Confident to take up any job in oil field industry.Good knowledge in drawings,construction materials,welding standard,piping,test pack completion etc..

Ability to learn new Languages, Technologies quickly Strong Knowledge in Civil Engineering Subjects Proficiency in Software Packages like Auto Cad, Auto Lisp, Staad-III Good Practical Knowledge in Civil Constructions „h Ability to learn new Languages, Technologies quickly

I am interested in a position within your company’s electrical installation or electrical service Departments.

7 years of experience in the field of design, development, analysis. Design and modeling of Special Purpose Machine, Machine tools & accessories, Dies, Cams, jigs and fixtures etc.

I am looking for a position of Field Engineer, Office Engineer or Quantity Surveyor. I worked with the JBC for a little over a year. I am a very hard worker. I am very proficient at reading spec books and engineering drawings.

Civil Construction Engineer, Construction Superintendent Lead Civil Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out