Resume - Total 11 years of experience for Instrumentation and control related design and ...

Misco Jobs

Resume #57183

CONTACT INFORMATION:
View contact information...

Professional Skills & Expertise

Instrument Control Philosophy, Feed package review and clarifications, PID review, Manpower and const analysis, activity schedule review, document control index, meeting with owner and consultants, selection of international standards for design, Hazop meetings.

Specifications for DCS, SCADA, ESD, F&G systems, Specifications of Field Instruments, sizing and calculations, Package Instrumentation, Technical bid evaluation and recommendation, vendor print review and inspection, factory acceptance test

Developing detail-engineering documents for installation and commissioning, co-ordination with field contractor, site supervision of construction related activities and commissioning

Good communication skills, professional approach, positive attitude and good at working with team, excellent at computerized working environment

Work Experience

November 2005 to present
GS Engineering and Construction Corporation, South Korea (LG Engineering)
Senior Engineer –Control System and Instrumentation

Projects Assignments q Heavy Oil Up gradation Project of GS Caltex, South Korea q Sohar Aromatics Project of Oman Aromatics Ltd.

Feed package reviews and comments, client review meetings, PID reviews and HAZAOP, Instrument team management, preparation of system specification and ordering, development of logic diagram for shutdown system, complex logics, interface between DCS/ ESD with package/ subsystem, review of instrument specifications and bid evaluations, subcontractors documents checking, client review meetings, PID reviews, vendor co-ordination and inter discipline coordination for squad checking, installation hookups review, loop drawing and instrument index etc.

January 2005 to November 2005
Technip KT India Ltd., Noida
Principal Engineer - Control System & Instrumentation

Projects Assignments q GS-1 and GS-15 Field Development Project of ONGC, India

Specification for offshore instrumentation including wellhead control panel, communication system, field instrumentation, foundation field bus based control system, shutdown system, fire and gas detection system, control valves and all related detail engineering documentation, technical bid evaluation, package review and co-ordination meetings between client and vendors etc.

September 2003 to December 2004
Tractebel Engineers & Constructors Pvt. Limited, New Delhi
Engineer Instrumentation

Projects Assignments q 30 MW Waste heat Recovery Power Project of Videocon, Goa q Dahej-Uran Pipeline Project of GAIL India Limited q Kerla LNG Terminal Feasibility Study for Indian Oil Corporation q City Gas Distribution Project of Gujarat Adani Energy Limited and IGL, New Delhi

Specification for metering skids, SCADA systems, fibre optics communication system, F&G systems, dispensers, technical bid evaluation, package review and co-ordination meetings between client and vendors etc

May 1996 to September 2003
Projects and Development India Limited (PDIL), Noida
Project Engineer- Instrumentation q Burrup Fertilser Pty. Ltd. of Oswal Projects Limited, Australlia q Ammonia & Urea Revamping Project of BVFC, Assam q Gathering station modernization of Syrian Petrochemical company q 10000 MT Ammonia Storage Facility of Oswal Chemicals, Paradeep q 350 MTPD Ammonia Synthesis Loop Revamp Project of RCF, Trombay q 1350 MTPD Phulpur Ammonia Expansion Project, IFFCO Phulpur

Preparation of specification control and shutdown systems, field instruments, control valve and safety valve sizing calculations, technical bid evaluations and drawing approvals, loop drawing and hook ups, instrument index, cable layouts, drum schedules, JB schedules, meeting with package vendors, inter discipline co-ordination, witness FAT for DCS/ ESD systems, site visit during commissioning of DCS/ ESD systems, feasibility study reports and safety audits, cost estimations, proposals, etc.

August 1994 to May 1996
Gangamai College of Engineering, Dhule
Senior Lecturer- Instrumentation

Classroom lectures of final year engineering course, laboratory set ups, internal examinations etc.

Educational Qualification

Bachelor of Engineering in Instrumentation with First class
Pune University, India (1994)

Computer Skills

Conversant with INTOOLS 6.0
Conversant with Microsoft windows applications like Word, Excel, Access
Preliminary knowledge of AUTOCAD

Personal Details

Date of Birth 7th February 1972
Launguage-English, Hindi and Marathi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3092)

Go to Search Parameters...

Brief Description

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

Technically astute and versatile subsea project engineer with experience in FEED, detailed design, fabrication, installation, regulatory and pre-commissioning of subsea assets

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

College graduate/entry level electrical engineer

Instrumentation, Automation, control & electrical engineer with 3 years experience

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

Hull / fields/site engr. structural detailer have an experience in shipyard industries.

After having the highest level of exposure in Project Planning for the past Eight years in one of the fastest growing companies in Dubai. I am looking for a challenging and creative position that will set new standards in Project Planning. And to obtain a challenging position.

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Having 4 year exp. in automotive sector.

IT PROJECT MANAGEMENT

Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Logistics Manager, Rig Manager, Materials Manager

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

Working on projects for various E&P Companies and Contractors

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Chemical Engineer working on Process & Projects Engineering with 5 years of experience

Mechanical Engineering Technologist

I am proficient in Timberline, Gradebeam, Suretrak, Primavera, Prolog, Viewpoint, Microsoft Office, Word, Excel, Works, Quattro Pro, Outlook, OneNote, and PowerPoint. I have also completed my 30 hour OSHA course and LEED AP certification.

Provide Project Control Scheduling Support

Project Recruitment Specialist

Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.

LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE

Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out