Resume - I have passed MSc in Geology from Nepal and Professional Master Degree in Geolog...

Misco Jobs

Resume #59225

CONTACT INFORMATION:
View contact information...

1. PERSONAL STATEMENT

I have passed Master of Science Degree in Geology from Tribhuvan University, Nepal in 1995 and Professional Master Degree in Geological Engineering from the International Institute of Geo-information Science and Earth Observation, ITC the Netherlands in 2003. Throughout my professional life, I have worked in the field of engineering geology especially in the area of hydropower development in Nepal. Further study in geological engineering in the Netherlands provided me an opportunity to upgrade my knowledge and professionalism in engineering geological field. Despite a huge potential as well as demand, Nepal has not been able to launch any new big engineering projects such as hydropower projects, road projects etc. and offer good working opportunity to skilled, experienced, educated people within the country due to its poor economical condition. Thus, I have been looking for a job in the same field of my experience some where else outside Nepal. Thus, I hope you will provide me a chance to substitute a suitable post.

Below, I have elaborated my education, experience, skills and expertise.

2. EDUCATION

Sept. 2002- Sept. 2003: Professional Master Degree in Geological Engineering (PM) from International Institute of Geoinformation Science and Earth Observation (ITC), the Netherlands - ranked as Good

Aug. 1991- Nov. 1993: Master's of Science (MSc) in Geology from Tribhuvan University, Nepal - first division

3. WORK EXPERIENCE

2.1 March 2007 to date

Employer: JV Norconsult/Lahmeyer International GmbH
Post: Geologist
Responsibility:

i) Follow up tunnel excavation includes;
* Perform geological tunnel logging
* Prepare monthly reports covering progress and performed support works
* Make own assessment on support design applied by the contractor ii) Follow up core drilling includes;
* Prepare monthly reports covering progress of the work elaborating rock description, rock quality, working conditions, in-situ tests performed such as SPT, permeability tests and Lugeon tests etc.

iii) Geological surface mapping
* Detailed geological mapping of dam site with description on rock types, degree of weathering, crack pattern with orientation and dip, weakness zones with fill materials, description of surface loose materials
* Detailed geological mapping of tunnel portals
* Identify and describe potential areas with landslide hazards in the project area and vicinity
* Assess geological profiles at characteristic points along the headrace tunnel based on geological features on surface

2.2 Nov 2003 - February 2007

Employer: Nepal Electricity Authority and other private entrepreneurs
Post: Geologist/ Consultant
Responsibility:

* Pre-feasibility level geological and geotechnical investigation of the project including site selection;
* Feasibility level geological and geotechnical investigation of the project and
* Detail design level geological an geotechnical investigation of projects;

2.3 Date: June 1995 – Aug 2002

Employer: Nepal Electricity Authority, Ilam Hydropower Project
Post: Geologist
Responsibility:

* Geological mapping of tunnel;
* Rock mass classification and recommend appropriate support;
* Evaluate foundation condition of major hydraulic structures such as weir, powerhouse etc.

4. TECHNICAL SKILLS AND EXPERTISE

Computer Application

* Microsoft office programs – expert
* AutoCAD - intermediate

5. LANGUAGES

Nepali - Mother tongue
English - Study medium for Intermediate level in Science (ISc - two years), Bachelors level in Science (BSc - two years), Master Degree in Geology (MSc - about three years with dissertation) and Professional Master degree in Geological Eengineering (PM - one year in the Netherlands)

TOEFL - test: Scored 223 in computer based TOEFL test.

6. MEMBERSHIP OF PROFESSIONAL ORGANIZATIONS

Life member of NGS (Nepal Geological Society) – membership no.: 401

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 3118)

Go to Search Parameters...

Brief Description

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

Geotechnical or Port and Coastal engineering

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

Instrumentation Engineer with 3 years experience

B.Tech Petro chemical Engineering and Diploma in Industrial safety with 3 years Experience

Materials expertise, inventory,issue and received handler

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

Quantity Surveyor

Diploma in Civil Engineering,Civil QA/QC inspector

Mechanical engineer, qa qc engineer, construction engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

All phases of I&E project design, construction, commisioning and start-up with experience spanning 20+ years

Forty+ years – Design of Piping Systems and Plant Layout for Nuclear and Conventional Power Stations and Petrochemical Facilities. Of that time, approximately, 10 years of this time was spent in developing 3D area models and system drawings for various companies and projects.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Electrical design engineer, lighting designer, single line diagram, fire alarm systems, cctv, site engineer, mep coordinator

Resident technical officer

Wth 3 yrs of experience in HVAC and completed B.Tech.

PLC HMI Programmer

project management\coordination-planner in primavera concepts

Completed bachelor of engineering in electrical and electronics from V.T.U,Belgaum.India.presently working as installation testing and commisioning engineer for ADWEAs DMS project with siemens ag from 25-02-07.before i was worked as a operation and maintenance engr for 110substain for K.S.E.B.

1+ years of experience in Ideas NX as a design Engineer

Land Surveyor

I recently qualified as an architect from Robert Gordon University, and am keen to join your highly reputed and internationally successful organization. It has always been my interest to be a member of a highly motivated team engaged in the design processes of medium to large scale projects.

Autocad operator (HVAC)

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

The past ten years in the construction industry has been most fruitful and challenging as I have found that supervision work includes duties of engineers,architects & contractors at times, from co-ordinating M&E & Architectural activities down to helping the main contractor to arrange meeting with c

reated designs for electrical equipment, conduit, and cable in power plants. created equipment schedules, conduit schedules, and cabling schedules to be used in the field. also created wiring lists to keep track of cables and wiring documentation in excel format and gsn

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

More than 8 Years of experience in the field of ELV System specialist well versed in Installation testing and commissioning of systems Including Building management system, CCTV System, Access Control system , Structured cabling etc..Having gained extensive experience as a team leader in execution

DCS AUTOMATION SYSTEM DESIGN ENGINEER

COmputer Literate--AutoCadd,Primavera,MSoffice Applications

Industrial Maintenance Electrical and Intrumentation Technician

I have gained experience in followings i. Heat Exchange Installation and Valves Package; Expansion Tank and Air Separators; Diffuser Installation; Booster Plump Installation; AHU/FCU Installation and Valves Package

Substation Design Engineer

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

Have worked in the electrical industry for 10 years with the last 4 years running my own signs and lighting installation company. I am educated to ONC level in Electrical Engineering and have the IEE 16th Edition Wiring Regulations Certificate.

I am an Engineering Planner with 10 years EPCM experience.

I HAS AN EXPERIENCE ON CONSTRUCTION FOR MORE THAN 12 YEARS.

Greaduate civil engineer, 4 years experience as highway design engineer, proficient in working withMX Road, Autocad, MS Office, excellent communication skills, good leadership qualities, good team player, quick learner, dedicated and hard working

To procure an innovative job in the field of Engineering, where by my skills can be enhanced and utilized in a myriad procession.

Servicing and Repairing Electrical and Electronic Equipments. I have a Diploma in Electrical Engineering, a New Zealand Trade Certificate in Electrical Theory and Practice, and a New Zealand Registered Practicing Licence

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out