Resume - Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

Misco Jobs

Resume #6090

CONTACT INFORMATION:
View contact information...

Presently i.e 8th December 1993 to: Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

1.Responsible for performing Heat/Cool load calculations, Selection of air outlets, sizing of ducts, selection of ventilators and A/c equipments.

2.Responsible for the preparation of shop drawings, Fabrication and Installation of HVAC system with the two fold objective of the producing efficient results at the optimum cost and carrying the job with in the specified time.

3.Responsible to the management in preparing daily revenue reports of the factory production output and site work accomplishment.

4.Responsible for identifying problems which cause delay and to initiate action for the best solution to the problems.

5.Responsible for co-ordinating with the Civil Consultants about modification, execution and testing of completed items.

6.Responsible for the co-ordinating with other disciplines such as Civil/Electrical regarding the provision of the concrete openings and sleeves on roof, floor and wall.

7.Responsible for the estimation, bidding and execution of various air conditioning and ventilation projects handled by the company. Projects.

Projects Handled:

1.Prince Mohammed villa ( Trane Central Split & Packaged units with duct work)
2.Prince Saud Villa ( do )
3.Bajrai 148 typical villas ( do )
4.U.S. Lucky base ( do )
5.Al Raashid Mall ( Duct work for more than 50 shops )
6.U.S.Consolate Genera ( Modification of the duct work and Aluminum jacketing for 15 residences)
7.Giant Store Al-Khobar ( Designed the duct system with Trane Central Packaged Units 1500 tons total cooling capacity)
8.Toy town Al-Khobar& Riyadh (Designed the duct system for the project with Trane Central Split & Packaged units 1800 tons total cooling capacity)
9.Saudi Transformers ( Designed the duct system for the project with Al-Zamil Central Packaged units 350 tons total cooling capacity)
10.Dammam Kidney Center(Designed the duct system for the project with Al-Zamil Central Split & Packaged units 300 tons total cooling capacity)
11.Abhasain Show Room (Designed the duct system for the project with Al-Zamil units 450 tons total cooling capacity)
12.Exhibition Center at Al-Khobar (Designed the complete system for the project with Trane units of 250 tons total cooling capacity)
13.Al-zahid commercial center Al-Khobar (Designed the complete system for the project with Al-Zamil units of 290 tons total cooling capacity)
14.Chilled water system for part of Al-Mouwasat Hospital (Designed the part of chilled water piping and duct layout)
15. Many private Residential villas (More than 200 villas designed the complete system)
16. Cameroon and weatherford factory (Designed for the DX system of total 250 tons Carrier brand)
17. Prince Mohammed villa at Rastanura (Designed for the DX system of total 200 tons Trane brand)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 2820)

Go to Search Parameters...

Brief Description

A versatile Civil Engineering and Project Management Masters graduate with proven track record of management of complex engineering projects pursues a career in the Project Management field.

Electrical power sales engineer, building &construction projects, ATAP division-LVS, ABB Arab S.A.E.

Instrument Construction, Comissioning of DCS & ESD

Civil Engineer With Project Management & Primavera, MS Project, Auto CAD & STAAD Skills

MBA, PMP Certified, PE(Texas), looking for a senior management position in a oil & gas company.

Design Engineer

Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

I am graduated civil Engineer, has worked in two countries (Nigeria and Pakistan) before. cv can be sent as attachment.

5 years of experience in the field of civil construction and Designing , Estimation of Under Ground Drainage system , Water supply distribution , feed mains, Storm water drain , Road and Drains. Presently working for M/s NCPE as project Engineer

14 MONTHS EXPERIENCE IN BELLELI SAUDI HEAVY INDUSTRIES, SAUDI ARABIA AS PRIMAVERA PLANNER. 5 YEARS EXPERIENCE IN RIYADH CABLES GROUP AS PLANNING ENGINEER

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

X-STEEL OPERATOR, DETAILING, CIVIL DRAFTSMAN

As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.

Electrical Engineer

7 yrs experience Generator Maintenance

I Have 4 years of exp in design of diesel engine power train components in reputed R&D AVL Technical center,Having good knowledge in PRo-e,got 1 year special training in Graz Austria on engine design

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

B.E. in Civil Engineering under Bangalore University from Ramaiah Institute Of Technology scoring a percentage of 71.85.(1995-1999)

Preparation of tender document, issuing tender, evaluation of tenders, submitting recommendation to tender committee for award of contract, preparation of contract document, administration of contract, corresponding with contractors on contractual matters, finalyzing variation PRPSL. from employer

An Civil Engineer with 9 years of experience in the oil & gas, infra structure, marine structure, pipeline and construction industry. Able to work on own initiative and part of a team, to provide full support to the project with regard to all civil construction aspects, in addition to the engineerin

I started my career as a structural engineer for more than 10 years. After some years on the field of Information Technology I want to go back to Civil Engineering. I prefer a position in Northern NJ or New York City, but I will consider relocation. I don’t mind some travel.

ZTE Pakistan (Pvt.) Limited: - Currently I am working as MSS Engineer in the O&M Team in the Telecard CDMA WLL Project .Installed & Commissioned ZTE ZXC-10 MSC, HLR..Operation & Maintenance of ZTE CDMA Network Elements like ZTE MSC, HLR and VLR.

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

I am a QA/QC Civil Eng. with experience in the Kuwaiti Oil Sector.

Application Manager - Control Valves and Engineered Products

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

10+ yrs experience in construction field with specialized in RCC structure & refractory material installation.

Completed Amusement and water Parks project in India and Bangladesh. I am Civil Engg. Diploma Holder. It is 3 year course.

Just I have graduated from Sheffield Hallam University in UK on October 2002 and looking for work opportunities throughout USA

I am a recent college graduate who majored in Civil Engineering Technology and is seeking the opportunity to gain experience, as an Entry Level Civil Engineer.

Engineer looking for job in construction industry in Los Angeles area.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

Site Safety

I have been doing civil drafting for an enigneering firm that does contracts for Texas Department of Highways and National Texas Toll Authority for a year now. I also work for the land development department and the surveyors. I have one year microstation experience in a job setting.

Configuration of Routing Protocols like RIP, IGRP, EIGRP, OSPF, BGP in Cisco routers.

As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

Eight - year experience in Civil Engineering Projects.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out