Resume - I am Electronics and Communication graduate and presently working in Saudi Arabi...

Misco Jobs

Resume #61155

CONTACT INFORMATION:
View contact information...

OBJECTIVE(S):
1. To maintain safe work environment through hazard recognition and removal
2. To think in advance so that possible accident maybe prevented.
3. To ensure the security of every individual who committed their lives to do the hard job and sincerely exerted their effort to perform properly their duties.

PERSONAL INFORMATION:
Height: 175 cm
Weight: 176 lbs.
Sex: Male
Birth date: May 22, 1975
Civil Status: Married
Number of Children: 2
Languages Spoken: English, Tagalog and Cebuano

EDUCATIONAL BACKGROUND:
i. Primary: Cogtong Elementary School
Cogtong, Candijay, Bohol ii. Secondary: Bohol School of Fisheries
Cogtong, Candijay, Bohol iii. Tertiary: University of San Carlos
BS in Electronics and Communications Engineering (BSECE)
Talamban, Cebu City

SHORT-TERM COURSES with TRAINING(S):
i. Safety Officer Training Course
1. Drilling Technology
2. Hydrogen Sulfide (H2S) and SCBA Instruction
3. Basic First Aid and CPR
4. Basic Offshore Safety or Basic Rig Pass Safety
5. Basic Construction Safety
Rodech Training Services Link International Inc.
ii. Programmable Logic Controller
Developing Mechatronics Software (Mechatronics Servicing NC III)
Technical Education and Skills Development Authority iii. Desktop Publishing (Corel Draw and ADOBE Photoshop)
Department of Manpower Development and Placement iv. Computer Technician (LICENSED)
Department of Manpower Development and Placement v. AutoCAD
Department of Manpower Development and Placement vi. Caregiver (INCOMPLETE)
MBL Development Training Center Corp.
vii. XPower Office Computer Training Course
Javasphere Computer Learning Center

SEMINARS:
i. Occupational Safety & Health (PHASE 1, 2, 3)
ii. Job Preparation Symposium iii. Workshop on Reaching for Excellence

SKILLS:
i. Computer Literate ii. Computer Repair iii. Typing (40 words per minute)
iv. Welding (GTAW/SMAW)
v. Repair on Printer, Copier, Scanner and Fax (Both Digital and Analog)
vi. Driving vii. Mechanic (Minor Engine Defects)

WORK EXPERIENCE:
i. HSE/Safety Officer-Sungchang & Al-shaikh Cont. Co. Ltd
Project: Ibn Zahr PP-III Utilities and Offsite Project
Location: Jubail Industrial City, Kingdom of Saudi Arabia
Date: October 26, 2007 to Present
Duties and Responsibilities:
1. Safety inspection and audit
2. Supervise if SABIC standards were being followed
3. Conduct training and orientation to all workers
4. Check work permit and area must be inspected first
5. Team leader (Safety Concerned) in the site and to be assisted by the foreman, QC and Work Permit Receiver
6. Attend meeting together with other sub-contractor and main contractor
7. Checking the checklist of the crane and trailer
8. Investigate incident
9. Daily toolbox meeting
10. Conduct walk through in the worksite
11. Submit daily report to the manager regarding what happen to the site.
12. Checking Scaffolding and Inspect together with the HSE of the main contractor
13. Maintain housekeeping in all areas ii. Safety Engineer/Inspector- Voss and Veloso Development Corporation.
Project 2: Constructions of Manufacturing Plant and Offices. Three(3) storey building.
Location: Magay, Compostela, Cebu, Philippines
Date: December, 2005 to August 9, 2007
Project 1: Construction of 18 storey building.
Location: Cebu Business Park, Cebu City, Philippines
Date: June 21, 2003 to September, 2005
Duties and Responsibilities:
1. Supervise the Safety Officers
2. Monitor the workers if following the safety practices
3. Investigate incident
4. Conduct Tool Box meeting
5. Issue LOTO permits and insure all workers know when removing it.
6. Gives instruction and training for the personnel working on the area.
iii. Safety Officer-Mack Mayer Construction & Development Corporation
Project 2: Construction of 400 units 2 storey Town Homes [not able to complete-I resigned(no night shift)]
Location: Sacris, Maguikay, Mandaue City, Cebu, Philippines
Date: January, 2001 to January 12, 2001
Project 1: Construction of 7 Storey (Condo) Building
Location: Basak, Lapu-lapu City, Cebu, Philippines
Date: November 8, 1999 to December, 2000
Duties and Responsibilities:
1. Implement safety procedure.
2. Safety inspection and audit
3. Look for hazards and remove/replace/control if possible.
4. Orient all workers about safety procedure.
5. Inspect all workers for proper use of PPE.
6. Checking scaffolding.
7. Checking excavation for proper protection.
8. Supervise the riggers and crane operators in lifting works.
iv. Waiter- Europa Delicatessen and Butcher Shop
Location: F. Ramos St. Cebu City, Philippines
Date: December, 1994 to March, 1996
Duties and Responsibilities:
1. Take customer orders.
2. Serve customer order properly.
3. Cleaning and arranging restaurant premises

CHARACTER REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 3092)

Go to Search Parameters...

Brief Description

To apply a position as an Electrical Engineer

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Power Plants Commissioning , Operation, HRSG Commissioning

I am a Diploma in Electrical and Eletronics Engineer with 3years experience in the field of Electrical Cad Designing and Electrical Control Panel Wiring, i do have knowledge in system administration and Primavera Project Planner.

Have a working knowlege of setting up total stations, performing traverses, level loops, topos, and drafting with Land Development Desktop

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Cost Estimating, Project and Contract Management, Planning/Scheduling, Project Controls and Finance

Surveyor with diploma and 3 years of wide range of professional experience

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

Provide technical expertise, guidance and leadership for a variety of designated engineering projects at site.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

CAD/CAM engineering

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Of late brilliantly completed the scheduled Training in Calibration, Testing and Conformity Assessment from RTC(ER), Govt. of India

I am a young ,dynamic, smart having a good percentage degree of production engineer.

I am Civil Engineering graduate and having three years experience in the construction field.

I have a three years experience as an auto electrician and heavy equipment mechanic for Trident Transport Company in Abu Dhabi. I am looking for same kind of job in Abu Dhabi or in Europe, like Netherlands, Belgium or Germany.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Logistics, Procurement and Materials Manager (Supply chain)

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

Summary An enthusiastic, Postgraduate Civil engineer with 2 years and 2 months of experience in the design, Engineering and Construction of Industrial, infrastructure and Multi storied Buildings, Eager to learn new technologies

recent chemical engineering graduate with 2 years of work experiences including R&D and industrial experiences. Experiences in pilot plant operations, bench tests, process engineer

I am a self-motivated, determined and organized individual who strives to perform any task to the best of my abilities. I have a strong background in 2D and 3D drafting, design and modelling and am capable of producing accurate and high quality drawings in a fast paced environment.

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out