Resume - Telecom Transmission Engineering, Computer and Electronics

Misco Jobs

Resume #62361

CONTACT INFORMATION:
View contact information...

Career Objective
To acquire a professional position in a well-reputed organization, where I can utilize my professional and educational experience, where I can learn, seek and apply my knowledge in the Telecom/Wireless Networking departments.
Education

2004-2006 Master of Communication Engineering (Spec. Telecom)
Griffith University
Brisbane, Queensland, Australia
Majors: Digital Control Systems Engineering,
Optical Communication Systems,
IT/Telecommunications, Computer Communication and Networking
Minors: Programming, Data Communication, Multimedia Authoring
Cumulative GPA: 5.1/7.0

1999-2003 Bachelor of Engineering in Information Technology (Spec. Telecom)
Hamdard University
Islamabad, Pakistan
Majors: Telecommunication, IT, Computer Systems, Networking, Electronics
Communication Systems, Programming
Minors: Business Management, Communication Skills, Critical Writing
Cumulative GPA: 3.43/4.0
Professional Experience
2006-Date DXX & Compression Engineer-Transmission Planning
HUAWEI Technologies, Pakistan, Ltd.
* Planning, Survey and Implementation for the SWAP and Expansion Project for the UFONE GSM, including Nortel's Passport (MSS) for compression£¬ KeyMile's PDMUX in the expansion and up gradation of sites all over Pakistan.
* Coordination with UFONE, Nortel, Makkays and other subcontractors, documentation, preparation of DN for sites and verification of equipment.
* Planning and implementation of Digital Cross connects and PCM / MW / OFS connectivity from BSC-BTS and BSC-MSC and PSTN sides. Rehoming/Re-routing of existing sites from Nortel BSCs to Huawei BSCs.
* MUX equipment planning and installation for the SWAP project and later on for the Phase B (Expansion) project for UFONE.
* Interaction and contribution while interfacing with key agencies for resolution of issues in order to effectively coordinate with various Telecom Industry workforces.
* Cut-over of existing sites and rerouting on UMUX for effective network management.
* Establish new or improve the existing mechanisms of information sharing and detailed reporting and documentation for each field or office task.
2003-2004 Telecom Engineer
Carrier Telephone Industries, CTI, Ministry of Information Technology
Major responsibilities included installation, testing and commissioning of different telecom equipment including Siemens SDH Multiplexers, PABX-RDBX TELESIS, PCM30H, UHF/VHF radio, FMX2 R3.1, SRAL (Siemens Radio LCDR), software and Hardware installation, Ericsson DRS, ONM services for Network Elements (NSS/BSS), Software Maintenance, Up-gradation and documentation.
* Network management, office computer networking maintenance and facilitation of Network components to the users.
* In-the-office troubleshooting of Telecom/Computer Equipments and Field tests/Installation/Up gradation.
* Monitor and analyze the training requirements for the ICT and also take necessary measures.
* Communication and coordination with Telecom/IT customers, including PTCL, TF, Siemens.
* Improved Technical/Management skills, team-building and communication skills.
* Motivated and Enthusiastic towards successful project completion.
Jan 2005 - Mar 2006 Accommodation Officer
Griffith University, Brisbane, Australia
* Supervision and maintenance of Off-campus Database Management in MS Access with Network Support to users.
* Handling of International ICT and E-services coordination matters and reporting to the Manager.
* Supervision and management of the Transport service for the Off-campus service provided to the new incoming Domestic and International staff and students.
* Managing the Commercial and Private Advertiser application forms and ensuring the quality of accommodation provided to students.
* Coordinate the meetings, seminars, workshops and conferences and subsequent follow-up. Training and information seminars arranged by the Residential Tenancy Authority of Queensland, Australia also was achieved.
* This job required vast usage of the computer and the handling of enquiries from around the world through telephone or emails. Thereby greatly improving my communication, IT and computer skills.
* This work also involved community building, academic support, mediation and assisting in administrative tasks for the office.
* This greatly improved my confidence in cross-cultural negotiation due to handling of difficult situations related to international students coming from different continents and cultures. I also developed excellent event organizing and managing skills.
July 2006 ¨C Sep 2006 Research Assistant
* Worked for the ICSL lab, Griffith University to develop code and program specific Control System problems in SysQuake apart from this, the work also included development of code for the Bessel Filter based PID algorithm on a combination of a controller board and a plant board. Custom made controller and plant boards were also used for testing and training purposes within the university with support to research staff and students.
Professional Trainings

* Involved in training on the complete installation and configuration of the ZTE switch, ZXJ10 digital switch in ZTE Pakistan Ltd by ZTE China Staff. This training also included the setup of Local Area Network via TCP/IP protocol for the purpose of Networking the switch and network equipment for call monitoring, switch operation and maintenance.
* Received thorough training in ZTE Pakistan Ltd on basics of Telecommunication and passed their comprehensive test and achieved Distinction.
* Successfully completed 2 months internship training at IBA-1-ITR-PTCL exchange, where on-hand skills on Siemens' EWSD and Huawei's C&CO exchanges were acquired.
* Successfully completed the Residential Advisor Training Program, Organized by Griffith University Australia, which included,
1) Community Building Skills 2) Effective Living Skills 3) Case Analysis
4) Administrative and Collegiate Policies and Procedures, 5) Outdoor Education Experience.
6) Responding to Racial Issues, Harassment and Discrimination
7) Drugs and Alcohol, Social, Medical and Legal Implications
* Successfully Completed "Conflict Management Training" organized by the Queensland Government, Australia.
* First Aid Training Certificate from St-John Ambulance, Australia.

Publications
* Publication in International Conference for Control Systems, IFAC in Spain, May-June-2006 related to the "Animated Control System Tutorials, for Educational Purposes". This paper describes the need to have these tutorials implemented by universities working together for the development of Control System applications, whereas including Griffith University and a few European Universities have already implemented them and used them for their major joint project in deploying and maintaining the Autonomous Vehicles.
Projects

* Development of Microcontroller based embedded PID Controller as my end of semester project and was done at Control Systems Laboratory at Griffith University. The main purpose of designing Embedded PID Controllers was to eradicate the need for continuous human operator attention, issues such as, Integrator Windup, Ziegler Nichols tuning etc were also dealt with.
* Development of Microcontroller Based Remote Sensing System as my degree project. This was achieved through Serial Data Communication between 89C51 Micro controller and PC serial port allowing transmitting heat sensor values from Microcontroller to a PC for monitoring and decision based functions.
* Development of Web-Animated Control System Engineering Tutorials, using Macromedia Flash 8 and MATLAB 6.0 as my Masters Thesis Project. This involved programming in Action Script 2.0, MATLAB and used web-publishing tools.
* Conducted study on GSM, AMPS and CDMA, Telecommunication (Signaling and traffic theories including SS7 protocol).
* Designed the database for Resource Planning System (RPS) of OMAR TRAVELLS. This database contains all the information about the client tours, accounts etc and all appropriate facilities.
Computer and IT Skills:

* Operating Systems: MS Windows NT/98/2000/XP, LINUX
* Advanced skills in MS Office Suite (Word, Excel, PowerPoint, Access, Publisher, visio)
* Computer languages C, C++, Java, Action Script 2.0, Lingo, HTML etc
* Engineering Applications: Circuit Maker 5.2, PSPICE, Protel PCB designing, MATLAB, AutoCAD, Electronic Workbench, Microsoft Visio, MapInfo, Link Budgeting

* Web Publishing Tools: Macromedia Studio MX including Dreamweaver, Fireworks, Flash and Director, 3D Studio MAX, Swish, Adobe Photoshop etc.
* Hands on experience on the application software of different Telecom Equipment made by SIEMENS AG Germany, like SDH (UNIGATE), FMX2 R3.1 (ACCESS INTEGRATOR), SIEMENS RADIO SRA L (LINK VIEWER).

* PC / server assembly and repair, Cisco routers/switches/hubs, Signal splitter.

* EEPROM and Flash Programmer for Atmel and Microchip Microcontrollers, using RS-232 Interface.

Professional Memberships

Engineers Australia
Membership Number: 3161897

Languages

English: Fluent Urdu: Fluent Pashto: Fluent
Personal Interests

Movies, music, table tennis, traveling, playing strategic games

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 2856)

Go to Search Parameters...

Brief Description

Study, Designing & routing of piping

Logistics, Procurement and Materials Manager (Supply chain)

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Bachelor degree in Mechanical Engineer with an experience of leadership as a Lieutenant for the Army Reserve of the United States, also graduated from a school of Engineering courses for the Army in MS. Willing to put my knoledge as an engineer for the use of the companys that can benefit them

Contracts Manager in switchgear environment (ABB) - manage 5 Project Managers - Engineers in switchgear and associated equipment projects.

I am geologist technician with 3 years of experience. I want to develop my skills in all Geographic Information Systems software. My special interest is renewable energy sources, especially geothermal energy,

Intermediate level geologist seeks employment abroad to advance career with varied experience. Currently based in BC, Canada, I have experience in Oil Sands and Complex coal: running drilling programs, building geology models using Mincom and Minesight, database management, coal quality...

I am a mining engineer and also has a masters degree in urban and regional planning.

Active, industries, creative, have good negotiation and cmmunication skills

Commissioning Manager

Over 16 years experience in the field of I&E and telecommunications more focus on project preparations, execution and commissioning. oil & gas industry projects and operations (UAE), power plants, telecommunications and bio-medical equipment. Having 6-yrs are on the supervisory level capacity, 8 on

Summary An enthusiastic, Postgraduate Civil engineer with 2 years and 2 months of experience in the design, Engineering and Construction of Industrial, infrastructure and Multi storied Buildings, Eager to learn new technologies

Mining Engineer with 35 years experience as a manager and superintendent in open pit, open pit casting, and underground mining in operations, engineering, maintenance and construction. Extensive oversease experience in North America, South America, and Indonesia.

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

I am a Project Controls Manager currently based in Saudi Arabia with over 20 years experience in the Oil and Gas, Construction, Mining and Property Development industries. Now looking to relocate to Malaysia, or Singapore.

Construction HSE Manager with 18 years of experience encompassing the areas of Safety Adviser through to Corporate HSE Manager. Formerly a Senior ranking Fire Officer (nine years experience). Five year apprenticeship served as a mech. engineer. Degreed engineer with both off-shore and on-shore exp.

A Mechanical Engineer and an MBA with years of progressive experience in in commissioning, procurement and project engineering of power plant renovation & modernization contracts

Mechanical Engineer with over 7 years experience in QA/QC of mechanical construction activities, Welding, Painting, NDT, Insulation, Implementing QA/QC procedures, Auditing

Maintenance Manager Engineer Middle East Experience, Looking for work in UAE

Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

I have an overall experience of 17 years out of which 11 years in Oil & Gas Development Projects. Presently I am working as Group Project Engineer in a Major British Exploration & Production Company in Edinburgh UK. Following are my current responsibilities:

Marine Engineer

Proficient in Microsoft Word, Excel, and PowerPoint, Sufficient knowledge of Surpac and Vulcan mine design softwares, Basic knowledge of AutoCAD and VNETPC ventilation software

Handling key customers like Saudi Aramco, Sabic Affiliates, Saudi Electricity Company, Saline Water Conversion Corporation, etc in the western region of Saudi Arabia related to Sealing Solutions.

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

BS in Mechanical Engineering from India, 36 years of Petrochemical industrial Experience in NDT & Vibration analyses field.

To obtain a Full Time position as an Electrical/ Hardware Engineer.

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

Project control engineer with experience in planning and cost engineerig fields.

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Expertise in Project Engineering, Cadd Management & related fields.

Fully experienced HSE Coordinator,Supervisor,Advisor comfortable in Oil&Gas,Construction and Military environments

ELECTRICAL ENGINEER

Rich17+yrs. experience in Project Management, detailing, execution, plant operations and engg.for large non ferrous, mineral processing, Smelting&Refining. Qualified Mech. Engineer presently Dy. General Manager (Projects) with flair for managing cost effective projects&deep problem solving skills

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Lead construction engineer (structural, methods, lifting, marine)

SENIOR PLANNING ENGINEER (OIL & GAS)

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

4 years of experience as a PRODUCTION ENGINEER.

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out