Resume - I am an Instrumentation & Control Engineer by Profession. Review of my credentia...

Misco Jobs

Resume #62554

CONTACT INFORMATION:
View contact information...

EMPLOYMENT SUMMARY

1) Fluor Daniel Consultant B.V, Kuwait as Engineer (Instrumentation & Control System Design) May 2007 onwards. With Kuwait National Petroleum Company (KNPC) at Mina Al-Ahmadi refinery for the Modernisation of Obsolete Instrumentation project (MOIP).

2) SNC Lavalin UK Limited, Kuwait as Lead Engineer (Electrical & Instrumentation) August 2005 to May 2007. Project with Kuwait Oil Company (KOC) for GC-27 New Desalter and Light Crude Train Modification & GC-27 Effluent Water Separation & Transfer and Minaguish Water Injection Plant Upgrade.

3) Siemens, Kuwait as Instrumentation Project Engineer. July 2003 to August 2005. Project with Kuwait Oil Company (KOC). 36" pipeline project for Ratawi/Burgan Crude from Wafra to Central Mixing Manifold and addition of new booster and export pumps at the export facilities in GC-27 for light crude oil. Addition of new Dual Tanks (Wet & Dry Crude Service) at GC-3, GC-6 & GC-8.

4) Middle East Control Services, Dubai as Instrumentation Project Engineer.
January 2003 to June 2003. Worked for various Tank Farm Projects undertaken by the company.

5) Kharafi National/ Al-Bahar Jacorossi, Kuwait as Planning and Maintenance Engineer. August 1998 to August 2002. With Ministry of Electricity & Water Supplies (MEW) (Kuwait).

6) Rashtriya Chemicals and Fertilizers Ltd., Mumbai, India as Instrumentation Engineer. July 1995 to July 1998. Experience in Steam Generation Plant (3 streams of 170MT/hour, 106ata, 510 DegC Capacity each), associated water treatment plant & ammonia plant of 350MT/Hour Capacity.

7) Industrial Consulting Bureau (ICB) Ltd., Mumbai, India as Instrumentation Construction Engineer. October 1994 to June 1995. Instrumentation Revamping works at National Peroxide Limited (Kalyan, Mumbai). Partial Involvement in the erection of Polyester Oriented Yarn plant, Reliance Industries Hazira.

8) Toshniwal Brothers Pvt. Ltd., Mumbai, India as Instrumentation Marketing Engineer. October 1992 to October 1994. Oval wheel meters, turbine meters, vortex meters, density meters, temperature & pressure regulators, control valves, actuators, positioners, DP flow & level meters.

EMPLOYMENT HISTORY
Fluor Daniel Consultant B.V Kuwait (As Engineer Instrumentation & Control Systems Design) (From May 2007 onwards)
Activities:
* Review of Basic engineering design packages.
* Preparation of detailed instrumentation & control system specifications & specific requirements as per KNPC project requirements & applicable international standards.
* Preparation of technical request for quotations.
* Preparation of Master Drawing/document index for design and detailed engineering.
* Procedures for plant hot loop cutovers/ tie ins with existing system.
* Review of technical bid evaluations
* Technical response and correspondence with client on technical queries and other clarifications.
* Interaction and co-ordination with other engineering disciplines (Electrical, Mechanical, Civil, Process.)

SNC Lavalin UK Ltd., Kuwait (As Lead Engineer Electrical & Instrumentation) (From August 2005 to May 2007)
Activities:
* Preparation of the Scope of Work, detailed engineering, based on the feed document provided by the Client including detailed study of process flow diagrams, modification of P & ID's, preparation of instrument list, preparation of Rosemount(RS3)DCS, Triconex Emergency Shutdown System and Triconex Fire &Gas System, annunciation panels, interfacing panels input/output list.
* Segregation & finalization of various alarm and trip points.
* Study and modify the Cause & effect diagram.
* Involvement in HAZOP studies and further node wise preparation of HAZOP worksheets which include the deviations, causes, consequences, existing safeguards and recommendations.
* Detailed review of vendors' documents and drawings for Rosemount(RS3)DCS, Triconex Emergency Shutdown System and Triconex Fire &Gas System including panel general arrangement drawings, process graphics, interlock logic diagrams, interconnectivity drawings, wiring & termination details, communication block diagrams.
* Prepare detailed Bill of Material.
* Preparation of data sheets as per KOC specification & standards for various flow, level, pressure and temperature instruments, motor operated valves, air operated valves control valves etc.
* Responsible for the total instrumentation & electrical construction activity at site.
* Managing a team of engineers & supervisors.
* Execute technical duties in accordance with KOC project specifications and standards.
* Preparation of QA/QC Inspection test plans (ITP) and various checklists, calibration forms.
* Preparation of method statements for critical and high risk activities, tie-in lists & work procedures.
* Liaise with other disciplines on construction activities.
* Preparation of weekly progress reports.
* Preparations of monthly look ahead schedule.
* Liaise with the client on day to day construction activities.
* To carry out inspection at various stages of FAT (Factory Acceptance Test) for DCS, ESD & F&G systems. These stages include preliminary functional tests, heat soak tests, full functional tests, system communication tests, radio frequency immunity tests and Site acceptance test.
* Knowledge of the following international standards and recommended practices: BS5345, BS5501, IEC 60079 Selection, installation and maintenance of electrical equipment in potentially explosive atmospheres. BS5490/BSEN,IEC 60529 Specification for classification of degrees of protection provided by enclosures. BS5793/IEC60534 Industrial process control valves. NACE MR0175 Specification for sulphide stress cracking resistant material. API RP 551/554 Process Instrumentation & Control. ISO 5210/5211 Multiturn & Part turn valve actuators. BSEN 5167-1 Measurement of fluid flow by means of pressure differential devices. IEC 61131 Pt 1 to 5, 7 & 8 Programmable Controllers. IEC227/228, BS6346/6360 PVC insulated cables/conductors of rated voltages up to and including 450/750V. IEC331, BS6387 Fire resisting characteristics/ performance requirement of cables to maintain circuit integrity under fire conditions. IEC332 Tests on electrical cables under fire conditions. IEC 754 Part1/ BS6425 Part2 Tests on gases evolved during cables under fire conditions. BS5308 Pt.1 & 2 Specification for polyethylene insulated instrumentation cables/ PVC insulated instrumentation cables for intrinsically safe circuits. EEMUA 133 Specification for underground armoured cable protected against solvent penetration and corrosive attack.
* Conversant with the following KOC Standards & Specifications.
015-JH-1903(General Instruments), 015-JH-1904(Distributed Control system), 015-JH-1908(Instrument Installation), 015-JH-1909(Instrumentation for Packaged Equipment), 015-JH-1910(Mechanical Completion of Instrument Systems), KOC-I-001(KOC Standard for Instrumentation & Control System Design), KOC-I-004(KOC Recommended practice for shutdown system panels), 015-JH-1911(KOC Standard for Control Room Cabinets), KOC-I-005(KOC Recommended practice for F&G system panels), KOC-I-011(KOC Standard for Instrument Cables), KOC-I-013(KOC Standard for Motor Operated Valve Actuators)

NGEECO(Siemens), Kuwait (As Instrumentation Project Engineer) (From July 2003 to August 2005)
Activities:
* Preparation of Bill of Material.
* Preparation of data sheets as per KOC specification & standards.
* Technical and commercial evaluation of bids for various instruments.
* Preparation of detailed cable schedule, Instrument/Cable layout drawings, and wiring/termination diagrams for cabinets and junction boxes, loop wiring diagrams, pneumatic and process hook up drawings.
* Field supervision of the construction activities which includes cable trench excavation, structural and cable tray work, fabrication of instrument and junction box frames and foundations, cable laying, glanding, termination, interpanel cabling for Triconex Emergency Shutdown systems, Triconex Fire & Gas and Rosemount (RS3) & Honeywell(TDC3000) DCS panels, ESD panel & relay wiring, calibration of instruments, preparation of calibration, pre commissioning and commissioning checklists, continuity and loop checking, configuration supervision of DCS graphics and I/O points, integration with existing plant control system.
* Liaise with Client representative.
* Managing project schedules.

Middle East Control Services, Dubai (As Instrumentation Project Engineer) (From January 2003 to June 2003)
Activities:
* Preparation of the Scope of Work, detailed engineering for the various turnkey projects undertaken.
* Liaise with the client for various technical approvals.
* Preparation of various documents like instrument specification sheets, Functional design specification (FDS).
* Preparation of Piping and Instrument Diagrams, Cable Route layout Drawings, Control room layout drawing, general wiring diagram, and instrument loop diagram, and power distribution layout.
* Calling tender for the purchase of equipments, technical and commercial bid analysis.
* Carrying out inspection and Factory acceptance test (FAT) at vendor works.
* Preparation of commissioning and maintenance spare parts list for various equipments.

Kharafi National/Al – bahar Jacorossi, Kuwait (As Planning & Maintenance Engineer) (From August 1998 to August 2002) for Ministry of Electricity & Water Supplies(MEW).
Activites:
* Maintenance of field and control room Instruments at various sites associated with the water department of (MEW).
1. Preparation of periodic maintenance/annual maintenance schedules for all instruments at various pump stations.
2. Preparation and periodic updating of material list for consumables, spare parts, tools and equipment
3. Maintenance of history data sheet for equipment's performance analysis and troubleshooting.
4. Preparation of technical specification, scope of work, tender documents, preparation of engineering drawing etc. for any new construction or modification.
* Maintenance of various instruments associated with the mobile reverse osmosis units at various sites.

Rashtriya Chemicals and Fertilizers Ltd. Mumbai, India
(As Project & Maintenance Engineer)
(From July 1995 to July 1998)
* Worked as maintenance engineer in STEAM GENERATION PLANT (3 streams of 170 MT/Hr capacities Pressure 105 Ata & Temperature 510deg C) and associated water treatment plants revamping work.
* Was responsible for developing Instrumentation & control loop drawings, preparation of Instrument summary. Preparing instrument specifications, requisitions, updating and verification of P&ID schematics, electrical wiring diagrams, layout drawings etc.
* Was responsible for procurement of Instruments by sending enquiries to various suppliers, preparation of technical and commercial comparison statements, placing orders & regular follow up for timely delivery of items, installation and commissioning.
1. Conversant with the various boiler controls like boiler drum level control, super heated steam temperature control, furnace draught control and combustion control.
2. Conversant with burner management system for both oil and gas firing.
3. Well acquainted with boiler start up and shut down procedures.
4. Maintenance of electronic pressure and flow transmitters, flame-monitoring system with auto controls, zirconia and para magnetic type of oxygen analyzers etc.
5. Periodic maintenance and over hauling of control valves and on/off valves.
6. Worked in the associated water treatment plant and conversant with the normal, regeneration and back wash cycles and auto controls.
7. Calibration of pH and conductivity analyzers is carried out periodically.
8. Maintenance of turbo generator instrumentation with regular calibration and checking of protection pressure switches, Bentley Nevada vibration monitors etc.

Maintenance of Field & Control Room Instruments in AMMONIA PLANT of 350MT/ day capacity including CH4, CO, CO2 & H2 analyzers. Installation, service, calibration and repair of pneumatic and electronic flow, pressure and Temperature transmitters, current to Pneumatic Converters(I/P). FOXBORO Micro Controllers & TATA HONEYWELL TDC3000 Distributed Control Systems.

Industrial Consulting Bureau(ICB) Ltd., Mumbai, India
(As Instrument Construction Engineer)
(From October 1994 to June 1995)
Activites:
* As Construction Engineer for Instrumentation Revamping works at National Peroxide Ltd, Kalyan, Mumbai.
* Involved in partial erection of new Polyester Oriented Yarn (POY) plant at Reliance Industirs Ltd Hazira, Surat India.
* Instrument Installation, cable tray routing, cable laying, instrument tubing as per layout & installation drawings.
* Continuity & Loop checking.

Toshniwal Brothers Pvt Ltd.(Mumbai, India)
(As Instrument Marketing Engineer)
(From October 1992 to October 1994)
Activites:
* As Instrument Marketing Engineer for Oval wheel meters, turbine meters, vortex meters, density meters, temperature & pressure regulators, control valves, actuators, positioners, DP flow & level meters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2856)

Go to Search Parameters...

Brief Description

My background encompasses over 10 years working experience in different industries.

Piping engineer with 10 years experience in oil field. Experienced in designing, supervising and construction of pipelines and piping for oil industry.

I`m willing to relocate and work as QC inspector, Site Engineer in sewer and water treatment field

Career Vision: Attain domain expertise in various aspects of Project Management & Controls in the execution of large size Projects on EPC/LSTK basis and grow to a position of leadership handling these domains in an organization of repute.

I am an Instrumentation & Control Engineer by Profession. Review of my credentials will confirm that I have 15 years of experience in instrumentation, operations, maintenance & design.

Electrical Engineer, Planner, Electrician, Multi Skilled, Hands-on, Leader,

Mechanical engr 3 + years exp in Sugar Industry/process industry

CSWIP Senior Welding Inspector

Coordinator Project, Site/Project/COnstruction Engineer, Cost Engineer and Project Management

Skilled Technician, Electrician. Instrumentation and Electrical cable Termination and Lube checking

Self reliable individual that is looking to improve in career and goals within self and a company, expericenced in design, 3D design and custom made projects

IT Network/Systems Manager

I am sridhar.K working as a safety engineer in IBN ZAHR PP III,jubail,KSA.I have nearly four years experience in safety field only

B.tech mechanical, cswip3.1, level2, iso9000 lead auditor

I&C Technician with broad experience

B.E. in Electrical, having basic knowledge in Embedded Systems, Robotics, Matlab, Simulink, Autocad, C++

EDUCATION: „h Govt. Polytechnic, Rajkot D.E. (Civil) WORK EXPERIENCE: „h 6 Year experience as a Site In charge (Construction Project) at Backbone Enterprises Limited, Ahmedabad

Civil Construction & Contracts Manager

Experitse in geophysical surveys, geotechnical, hydrogeological investigations, environmental and engineering applications as well as software development using VB.

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Instrument Engineer / Supt

MECHANICAL ENGINEER WITH 2+YRS OFFSHORE EXPERIENCE IN SUBSEA PIPE LAYING,TIE IN AND RISER INSTALLATION,SBM AND PIPING INSTALLATION

Working as Engineer involved in Design and Commissioning of PLC/DCS Panels & logics and HMI/SCADA systems and Customize Reports. Engineering on multiple communication networks and protocols.

A mechanical design engineer, experienced in prototype packaging, embedded systems programming, optical integration, cryogenic environments.

A Senior Land Surveyor/ Data Manager with 17 years experience on large infrastructural projects. Diverse 3D mapping and engineering experience using MicroStation, AutoCAD, MX, InRoads and Surveying software packages. A provider of survey, design and CAD support services for tenders and projects.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Objective: To obtain a challenging PDMS / PDS piping designer position in energy industry.

PRO-E DESIGN ENGINEER

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

Systems Engineer, Catia, Solidworks, stress calulations

piping design, supervision on large projects, estimating/cost and budget control

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Sr. Project Controls Specialist

Cad Engineer

Telecom,telecommunication,engineer,engineering,communication,telecom and IT,WIRELESS COMMUNICATION,OPTICAL FIBER

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

Java Servlets, JAVA, ASP, VB, ASP.NET, C#.NET, VB.NET,JSP, JavaScript, XML, AJAX,Oracle, MS SQL Server, MS Access ,IIS, Apache

UNIX Systems Administrator, Sun Solaris, 8 years

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out