Resume - piping engineer , pipeline engineer , mechanical engineer, construction manager

Misco Jobs

Resume #62723

CONTACT INFORMATION:
View contact information...

01/04/1965

Personal Profile
I have experience on piping & pipelines over sixteen years at many sites which you can see below shortly listed. The chance to work with worldwide contractors over the past sixteen years helped me to gain an international experience in PIPELINE and PIPING sites in a variety of plants, i.e. Natural Gas, Crude Oil, Sulphur Recovery, Polypropylene. I am familiar with ASME B31.8, B31.3, BP 192, and API 1104.

Education Background
Istanbul Technical University, 1988
Mechanical Faculty- B.Sc. Aeronautical Engineering.

Courses and Seminars
Visual Welding Inspection (Level1) Cimtas Pipe 2004
Kaizen Work Developing Prog. Cimtas Pipe 2004
Risk Assessment Training BP-Sangachal /Azerbaijan 2002
Advanced Safety Audit BP-Sangachal/Azerbaijan 2002
Safety Induction Course Aramco / Saudi Arabia 2000
Advanced Level English Course The English Centre/Istanbul 1999
Principles of Safety Bechtel-Enka JV /Kazakhstan 1997
Cathodic Protection for Pipelines Igdas A.S. / Istanbul 1995
Management Course Igdas A.S. / Istanbul 1994
Network Calculation with Computer Gas De France / Istanbul 1993
Intermediate English Course Dilko English / Istanbul 1993-1994
Principles of Steel Pipeline Gas De France / Istanbul 1992
Natural Gas Seminar Mech.Eng. Membership/ Istanbul 1991

Employment History

Tekfen Construction & Installation Co. 2005 - Present
Pipeline & Piping Chief Engineer (Head of Mechanical Group)
I am working in Doha in Qatar for RMETP (ethane gas) pipeline EPIC project for Qatar Petroleum, which are 120 km of 20" and 12 km of 24" in diameter including 10 of stations at various kilometres between. I am also responsible for all the mechanical items like fabrication & installation of under/g and above/g piping, equipment installation and fabrication &erection of structural steel at the stations.

Bechtel - Enka Joint Venture 2004-2005
Piping Superintend
I worked in the Spool Fabrication Shop at Tengiz oilfield, Kazakhstan. I was responsible for the fabrication of piping and pipe supports for SGP&SGI projects. Both projects scale was about fabrication of 9,500 ton pipe spools within a year. We were the main contractor for TengizChevroil which is sister company of Chevron.

Amec-Tekfen-Azfen Consortium 2002-2004
Piping Group Chief
I was responsible for all the mechanical and piping work in "Yard Upgrade Project" in Azerbaijan for BP. We completed the installation of a total of 12,000 meters of u/g fire waterline, heating system lines, hot water and potable waterlines, and utility airlines. Equipment installation and mounting of the tanks in the utility building were also part of the scope of work. I was mainly involved in generating method statements and risk assessments for the activities.
I also worked in Sangachal Terminal for BP in Azerbaijan. I completed the piping work in additional Train-5 unit including 16 hot taps in the live process plant.

Gama Construction Co. 1999-2002
Piping Engineer
I worked as the site erection superintend for GAMA in Hawiyah Gas Plant, Saudi Arabia, in the construction of a Sulphur Recovery Unit (SRU) for TPL/Italy for Saudi ARAMCO. We have completed 3600 tons of piping, vessels and boilers installations under very strict safety regulations.
Prior to this job, I worked as the site erection superintend in Al-Jubail in the construction of a Polypropylene Plant (a turn-key project for American PARSONS CO). This work comprised 1600 tons of piping, installation of the reactor and storage tanks for IBN-ZAHR Company.

Bechtel-Enka Joint Venture 1997-1999
Piping Superintendent
I worked in the pipe fabrication shop in Tengiz oilfield, Kazakhstan. I was responsible for the pre-fabrication of pipe spools and pipe supports for the Debottlenecking project (large revision of the sulphur recovery plant) for TENGIZCHEVROIL. I also transferred and worked for spool erection on site after I completed fabrication.

Istanbul Natural Gas Dist. Company 1990-1997
Engineering Group Chief and Site Superintend
I began in engineering design office as Natural Gas Network design engineer and then became chief of this group in corporation with Gas De France as the official consulting company for two years. Then after my position changed to the site management
I managed to set up a several inspection team and installed 24", 20" CS under/g pipeline of about 258 km for distribution of natural gas and 2000 km of polyethylene under/g pipeline in Istanbul city.

Personal Skills
Key Skills
* I have worked at -38 deg. C in Kazakhstan and ~+50 deg. C in Saudi Arabia, managed to work together with various citizens like Indian, Pakistani, Malay, Pilipino, Arab, Kazakh, Azeri.
Computer Skills
* Windows Excel &Applications, Fortran IV, Basic.
Language Skills
* Turkish – Mother Tongue
* English – Fluent
* Azeri – Fluent
* Kazakh – Intermediate
* Russian – Basic

References are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 2916)

Go to Search Parameters...

Brief Description

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Planning Engineer Infrastructure ,Oil & Gas & 5 years

DCS APPLICATION ENGINEER WITH 4 YEARS EXPERIENCE

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

Experienced Electrical Engineer with Professional License

17 years of, Experience in QA/QC / NDT of Pressure Vessels, Heat Exchangers, Piping. Good exposure in welding inspection and NDT methods. Thorough knowledge & exposure to Manual, Semiautomatic and Automatic welding . Experience in painting inspection,Hardness check and PMI.

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all s

Architect and Interior Designer

Over six years of extensive experience in Planning of a large Infrastructure & Commercial Development Project

HVAC Engineer,Project Engineer,Mechanical Engineer,Commissioning

BE (Electrical) with 7 Years Experience in the Field of Purchase, Contracts, Planning & Cost Control, Budget, Cash Flow, Project Reports & General Management

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Area of expertise is ranging from Preliminary and Details Design, Construction

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

Five years experiance in this civil engineering .

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

Planning Engineer/ cost controller using Primavera P3 Construction Experience as Project engineer

Project, Construction Management, Contract Administration, Supervision & Site Control, Quantity Surveying (QS), Cost Estimation, Site/store co-ordination & Control, Project Planning, monitoring & review of progress, Site Survey & estimation of quantities.

Seeking a continually challenging career in Civil Design

i have more than 6 years experience in geotechnical engineer

pipeline engineer / process engineer

having experience in oil, gas refinery and petrochemical as insulation and painting engineer

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Exposure the actual horizontal and vertical constructions and marine construction such as roads, drainage and sewerage systems, buildings, foundations, elevated structures for the equipment, breakwater, Jetty, and shore protection.

Concrete batching plant supervisor, wh can handle batching plant... etc. know to design concrete very well.

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Experienced in construction / pre- commissioning/ commissioning capacity both onshore and offshore since 2003 and been involved in a number of various major projects within a wide range of the engineering industry. I regard myself as a hardworking reliable person who is capable of working under pres

I have been involved in the Construction Industry for the past Six Years in the Field of Highways Construction as a Quality Control Engineer. During this period I have worked with various contractors on highways projects and at presently working with consultant involved in Dubai Metro Project. I am

Project Management

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

Safety Supervision, Oil & Gas, Constructions, petrochemical, civil works and others

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Distribution substations installation & commissioning,operations & maintenance of all substation equipments

Electrical, Instrumentation and Control Disciplines

Being in the field of engineering for more than 5 years, experienced in various jobs like HVAC systems, MEP, Air pollution Control Systems, Water Treatment Plants Fabrication & erection

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

I am Quality Control Engineer with Seventeen years experience in Oil&Gas and Power sectors.

piping engineer , pipeline engineer , mechanical engineer, construction manager

Planning Engineer with more than 5 years local and international experience in the field of mechanical / planner engineering from construction of Industrial, Building and Domestic Residential onshore project acquired extensively with past position handled on the above qualification.

Has an extensive experience of 4 years & 10 months in this trade of discipline from design to implementation of projects both Civil and MEP Works, wide scope of planning, quantity surveying, estimating, cost engineering, cost controlling and project management skills.

Experience CNC Maintenance engineer including installation and troubleshooting. Familiar with Fanuc and Mitsubishi CNC control

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out