Resume - Specialized in electrical commissioning engineering substation and protection, p...

Misco Jobs

Resume #63684

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: 05 December 1980

NATIONALITY: INDIAN

QUALIFICATION: Diploma in Electrical Engineering, 2000
DCP, C-DAC 2000
AMIE ¡V Power Plant Eng. (studying)

COMPUTER SKILL: E-TAP 5.0, OTI, USA
AUTOCAD, C ¡V C++, Relay Testing Software
COMPANY: AYT International, Dubai, UAE

Project Execution at: Electricity and Water supply board of Dubai and
Sharjah Government

Designation: Senior Electrical Testing & Commissioning Engineer

Nature of Work:

O Testing and Commissioning of the Substations Protections, Protection schemes, switching operation up to 400KV
O Supervising of the Junior Testing Engineers
O Maintaining the Testing Equipments and making use of these equipments make of Phenix Technologies-USA, ISA test-ITALY, Megabras Industria-BRAZIL, DV Power-SWEDEN, ndb technologies-CANADA, Vanguard-USA, Deltatronics-AUSTRIA, ALFF-SWITZLAND, Neumann Elektrotechnik-GERMANY, HV Diagonistc-USA, Mtronix-GERMANY and many more
O Developing and customizing the testing protocols and procedure of testing and commissioning
O Preparing the As Built documentations and Red Mark drawings
O Providing the Specialized Testing and Commissioning Services to the Customers of Oil and Gas, Process Industries and Utilities
O Trouble Shooting during Testing and Commissioning
O Liaising with Customers, Consultants during execution of the project
O Developing the Capability for System Studies etc in the organizations

„« TECHNICAL CAREER

September'05 to August'07

Testing and commissioning Engineer - Larsen and Toubro Electromech L.L.C
Engineering and Maintenance Projects Sultanate of OMAN

Project Executed: Petroleum Development of OMAN

Designation: Electrical Testing & Commissioning Engineer
PDO (SHELL) approved Protection Engineer and Electrical Engineer

Job Responsibility:

* Testing and commissioning of 220kV Switchyard, 33kV switchgears, Power Transformers, Control and Relay Panels and LT Panels
* Testing and commissioning of Synchronous and Induction motors up to 14.8 MW
* Testing and commissioning of all kind of Protective relays like O/C, E/F, O/V, U/V, Differential prot., Frequency (O/U), df/dt, Synchronizing, Power, Over Fluxing, Out of Step, -Ve phase sequence, Bus-bar, Pole slip, Distance, Comprehensive motor and Generator protections of all reputed makes like GEC, ALSTOM, GE, SEG, ABB, SEMEINS, L&T, SEL, ER, EE & JYOTI
* Experienced with testing equipments like Omicron(CMC), Doble(F6150), Programma(Freja3), ISA(Txxx) ect.
* Planning schedule of Testing and Commissioning activates
* Have the adequate working knowledge in international Standards-BS, SP, and SHELL standards.
* Take up individual site responsibility, Plan the work execute the work with required Men &Materials
* Preparation of Material list, ordering, co-ordinating with Purchase Dept., receiving, verification, client approvals, ensures the right utilisation.
* Follow the Quality & Safety procedures for the concerned works, striving to achieve the in-time completion of Projects and Shut Down works
* Excellent co-ordination with Clients as well as with the concerned Consultants, Vendors & Inspection Authorities,
* Analysis of Power system studies
* Analysis of Relay Co-Ordination

November'00 to September'05

Sr. Electrical Engineer - ELCON ENGINEERS Pvt. Ltd.
P.S.S. and Testing & Comm. Department Baroda, Gujarat, INDIA

Project Executed:

Client: Petroleum, Power, Fertilizer & Petrochemical industries at all over INDIA

Designation: Testing, Commissioning and Application Engineer

Projects: Relay Testing & Commissioning, Motor, HV switchgears, P.S.S. & Relay Co-ordination by E-TAP & Manually

Jobs Responsibility: ¡´ Protective Relay Testing & commissioning of entire Plant
¡´ Scheme Testing of Unit Protection of Generator, Transformer and Motor
¡´ Implementation of Protective scheme
¡´ Testing & Commissioning of Protective Schemes of Motors and Power Transformers
¡´ Testing & Commissioning of 220kV/3.3kV Switchyards, HV Motors, APFC, Starter & Power Transformers
¡´ P.S.S. of entire Plant
¡´ System Stability in Transient condition
¡´ Relay co-ordination of all protective relays like Generator, Motor & Feeder Protection
¡´ System Modification according to latest technology
¡´ Single Line Dia-gram on AUTOCAD & E-TAP

December'99 to October'00

Jn. Engineer - BARODA TRASFORMERS & SERVICES
Testing & Comm. Department Baroda, Gujarat, INDIA

Project Executed:

Client: KRIBHCO, HAEP, ONGC, NTPC & GEB
Designation: Testing & Commissioning Engineer
Project: Testing & Commissioning of Power Transformers
Jobs Responsibility: ¡´ Testing & Commissioning of Power Transformers up to 11/220kV - 100MVA
¡´ Over-hauling of Power Transformer

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 3119)

Go to Search Parameters...

Brief Description

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Applying for the post of safety officer in your esteemed concern

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I am Tank and piping/pipeline / structure Superintendant

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

I'm the Safety Manager for the company I'm with now...

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

Pipefitter with supervisory and training facilitator experience

Prevent / correct unsafe acts & condition.

Project Manager - Sales - Technical

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

A Mechanical Engineering graduate from NIT/KREC SURATKAL INDIA with over 19 years of experience in mining sector with over 7 years as Head of Maintenance operation in underground as well as open pit mine.Presently working as SBU head with responsibilities including planning,procurement,budget prep.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Civil Engineer To render quality service to the company that I may be a contributory factor in achieving the company’s objectives.

Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available

Project Management, Primavera P3E Scheduler

Instrument Engineering, Fire & Gas Engineering

Manager / Engineer ( HW/SW/QA/Training )

Bachelor of Engineering (Mechanical) from Adiparasakthi Engineering college, Melmaruvathur, Madras university. (April 2002)

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma

Marine + International Projects Oil & Gas

High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.

Technical Project Manager

Project Engineer/ Program Manager/ Controls Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out