Resume - To obtain a Full Time position as an Electrical/ Hardware Engineer.

Misco Jobs

Resume #63991

CONTACT INFORMATION:
View contact information...

Education:
Embry Riddle Aeronautical University, Daytona Beach, FL
Master of Science in Aerospace Engineering, Fall 2004
CGPA: 3.50/4.00
Major: Aerodynamics
Thesis: "Adaptive Synchronization of Chaos for Secure Communication".

Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Bachelor Degree in Electrical and Electronic Engineering, Aug 1999
CGPA: 3.33/4.00

Employment Experience:
T-Mobile USA, Operation & Engineering Dept., Norton, MA, USA
Aug '05;- present Field Network Operation

Currently working on UMTS / 2G consolidation project in Greater Boston Area.
Resolve complex issues at the Ericsson BTS (GSM/EDGE/GPRS) cell sites.
Play a central role in process optimization, in the form of expansions, work orders, site builds, and integrations.
Collaborate with equipment vendors, T-Mobile Network Operations Center personnel, and members of the RF Design and Optimization group.
Understanding of all components of a GSM network, including T-1 architecture and microwave theory.
Interface with Engineering, Network, and vendor technical teams to manage system change and resolve planned or unplanned service impacting events.
Working knowledge of RF test equipment such as power meters, spectrum analyzers, T1 test sets, and Anritsu Site Master.
Working experience on E911 and Complete LMU installation, commission and troubleshoot.

IN-XS Wireless, Boston, MA (Authorized Dealer for T-Mobile, USA)
June '04; – July '05; Sales Representative
Sales Representative and Technical Assistant for T-Mobile Products

Skyline Airways Pvt. Ltd, Kathmandu, Nepal
Sept '99;-Aug '01; System Engineer
Quality Assurance and System Engineer for DHC6-300 Twin Otter
Aircrafts and Pratt and Whitney PT6A-27 Engine. Involved in maintenance planning of DHC6-300 Twin Otter Aircrafts.

Embry Riddle Aeronautical University, Department of Aerospace, Daytona Beach, FL, USA
Sept '02;-May '04; Teaching Assistant (TA)
Senior-Level Electrical Engineering Lab Instructor
Sept '01;-April '02; Graduate Tutor
Tutoring students in the Athletic Dept. Math, Physics

Professional Training:
* " Anritsu Site Master Training and Certification", Conducted by Anritsu, Bloomfield, CT, July 17-18, '07;
* "WCDMA Node B Installation Planning", Conducted by Ericsson, Norton, MA, June 20, 2007
* "ATM & TCP / IP in UMTS for T-Mobile", conducted by Award Solutions, Norton, MA, June 14 -15,2007
* " Ericsson W-CDMA System Overview", Conducted by Ericsson, Norton, MA, April 12, 2007
* "GSM RBS 2X06 Site Maintenance with WTDMA", Conducted by Ericsson, Norton, MA, Sept 01, 2006
* "Radio Frequency site Safety Awareness Training", Conducted by RSI, Providence, RI, Nov 11,2005
* Training on nanoBTS™ product of ip.access, Norton, MA, Dec 07-09, 2005
* Workshop on WLL (Wireless Local Loop) and VSAT, Organized by Nepal Telecommunication Authority, Kathmandu, Nepal, Jan 15- 16, 2001

Relative Project:
* "Acoustic Emission (Non-Destructive Testing) Source Characterization in Fiberglass and Neat Epoxy Resin using DiPS Software": Experiment designed for undergraduate students, October 2002
* Telecommunication Network Design Decision: Genetic Algorithm Approach, March 2004
* Flow Analysis of a Valves using FLUENT/GAMBIT Program, September 2003
* Computational Fluid Dynamics: Supersonic Viscous Flow over a Flat Plate, March 2004
Computer Skill:
* Working Knowledge in Pratt and Whitney ECTM (Engine Condition Trend Monitoring) software
* Working Knowledge in Ericsson OMT, Nokia NEMO, UNIX, Linux, Solaris
* Knowledge in Dassault CATIA V5, Maple, MATLAB, FLUENT, CFX and C++ and FORTRAN
* Working Knowledge in Electronic Workbench, PSpice, Labview

Publication:
* Pantha, M.: "Adaptive Synchronization of Chaos for Secure Communication" thesis work submitted for the requirement of Master of Science in Aerospace Engineering, Embry Riddle Aeronautical University, Fall 2004.
* KC, N., Khan S., Pantha, M.:"Development of Data Acquisition System" a thesis work submitted to the Department of Electrical & Electronic Engineering, Bangladesh University of Engineering and Technology in partial fulfillment of the requirement of the Degree of B.Sc. (Engineering), 1999.

Leadership:
* Member of the IEEE since 2004.
* Member of AIAA since 2004.

References: Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 2815)

Go to Search Parameters...

Brief Description

Handling key customers like Saudi Aramco, Sabic Affiliates, Saudi Electricity Company, Saline Water Conversion Corporation, etc in the western region of Saudi Arabia related to Sealing Solutions.

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

BS in Mechanical Engineering from India, 36 years of Petrochemical industrial Experience in NDT & Vibration analyses field.

To obtain a Full Time position as an Electrical/ Hardware Engineer.

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

Project control engineer with experience in planning and cost engineerig fields.

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Expertise in Project Engineering, Cadd Management & related fields.

Fully experienced HSE Coordinator,Supervisor,Advisor comfortable in Oil&Gas,Construction and Military environments

ELECTRICAL ENGINEER

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Lead construction engineer (structural, methods, lifting, marine)

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Electrical Engineer, Six Sigma, Lean, Manufacturing

33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

More than 20 years E&I experience of Maintenance & Commissioning within the Oil & Gas Industry. Enjoy working as part of a team but I can also operate independently when required. Self-motivated, resourceful, adapt quickly to new working environments, easily integrate into multi-cultural operations

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Buyer, Purchasing Agent, 38 Yrs. Material Handling and Purchasing Experience

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Seven years experience in quality control and quality assurance, welding inspection, Nondestructive tests (RT, UT, PT& MT),destructive tests (tensile,bend,hardness, macroscopic, impact, corrosion,...), in the fields of (Pressure Vessels,Boilers,piping, steel structure , tanks & Pipelines) at gas &

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Quantity surveyor, estimation and land surveying works

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Civil engineer having knowlegde and working exposure of AutoCad 2000 and Staad 2004

Construction Project Manager, Property Development Manager

Electrical and Instrumentation Technician/Engineer with significant experience in Construction, HUC and Maintenance in the Petrochemical and Oil & Gas Industries at Technician or Engineer levels for companies with several large development projects ongoing at once.

Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.

Engineering/Operations professional with sixteen (16) years of experience managing multi-disciplined projects.

having 5 years experence by using cad tools such as proe catia associated with automotive\offhighway industries

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

B.Sc., industrial Engineering with 10 years experince. in project organization , planning and control, contractor for the construction and utility project, line production planning and control. Quality control and assurance, maintenance, system analysis and inventory control.•gripe with relevant int

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out