Resume - Welding inspector piping & structural

Misco Jobs

Resume #65089

CONTACT INFORMATION:
View contact information...

Nationality: Indonesia
Place/Date of Birth: Medan/ Oktober 10, 1974
Sex: Male
Status: Married
ID: 1.10386.014.13.03.03

SUMMARY OF QUALIFICATIONS:
------------
7 years working at fabrication oil&gas piping and structural as position QC Welding Inspector
------------

OBJECTIVE:
------------
Oil & Gas

WORK EXPERIENCE:
------------
* 22October 2007 Up to Present, QC Welding Inspector Stuctural.PT Oil & Gas Technologi PTE LTD
Tasks & Responsibilities:
* QC Structural Inspector
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection,Dimensional spool
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Handling in Welder test Qualification.

Project Handled:
 MAARI FIELD DEVOLOPMENT FABRICATION AND INSTALLATION OF GRILLAGE & SEA FASTENING (CLOUGH PROJECT OMV NEW ZEALAND)

* Agust 2007 Up to 15 Oktober 2007, QC Welding Inspector Piping.PT Edaran Profab PTE LTD Mechanical Construction
Tasks & Responsibilities:
* QA/QC PIPING INSPECTOR
- Handling In Progress inspection of Piping & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection,Dimensional spool
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Handling in Welder test Qualification.
Project Handled:
 FPSO BELANAK FIELD DEVELOPMENT, KBR AND CONOCOPHILIPS PROJECT
* June 2007 Up to Agust 2007, QC Coating Inspector.PT Cladtek International PTE LTD BI-Metal Pipe Clading
Tasks & Responsibilities:
* QA/QC COATING INSPECTOR
- Handling In Progrees auto blast machine,cek grit and temperature machine before blasting
- Witnees equipment blasting
- Cek Visual material before blasting
- During blasting cek wet and dry room with hygrometer and wet and dry digital
- Cek relative humidity with humidity digital equipment
- After blasting cek propile inteal and external pipe with comparator and boroskop
- Release pipe after blasting.
Project Handled:
 HASDRUBAL ONSHORE &OFFSHORE PIPELINE (BG TUNISIA)
 HARWEEL CLUSTER PHASE2 DEVELOPMENT PROJECT OMAN (PETROFECT)

* January 2006 Up to May 2007, QC Inspector ( Structural ) Dept,J Ray Mc Dermott Batam Fabricator Yard.Indonesia
Tasks & Responsibilities:
* QA/QC INSPECTOR
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Conduct visual inspection of beam,angle and other material.
- Make workpack with compare to inspector realese.
Project Handled:
 WOODSITE ENERGY LIMITED, FOSTER WHELEER PROJECT LNG PHASE V EXPANSION 75 MODULE BURRUP PENINSULA,WESTERN AUSTRALIA
 CPP KERISI DEVELOPMENT PROJECT,CONOCOPHILIPS
 ANGEL GAS PROJECT WOODSIDE

* Mei 28, 2003 – September 30, 2004, as a QC Inspector Certification (NDT technicians, Piping, PMI, Material Traceability), Quality Control (QA/QC) Dept, J. Ray. McDermott Batam Fabrication Yard, Indonesia
Tasks & Responsibilities:
* QA/QC INSPECTOR
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Conduct visual inspection of beam,angle and other material.
- Make workpack with compare to inspector realese.

* QA/QC Document Controller (Certification)
- Typing and generation of spread sheets.
- Prepare NDT drawing and filling NDT drawing As per project.
- Make report package,weld summary,NDT Joint, Hydrotes.
- Assures safe usage of radioactive equitment and personal whitin the yard.
- Pursues the acceptance of the Project Certification with the coustomer and Certifying Authority
- Cross checks Operators/Tecnicians.
* Material Inspector
- Cek heat number material,and compare to material receving
- number material,and compare to material receving
- Prepare Heat Number Material
- Make report material and bill off material
- Submitt to client report from material transbility
* Positive Material Inspector (PMI Inspector)
- Compare NDT Drawing Piping
- Inspection to joint and shot material with metorex
- Make report positive material identification and submit to supervisor
- analisis material indentification asper shot material

Project Handled:

 FPSO BELANAK FIELD DEVELOPMENT, CONOCOPHILLIPS
 DAN FG FIELD DEVELOPMENT, MAERSK OIL & GAS
 RANG DONG FIELD DEVELOPMENT PROJECT ( NCWI & NULQ), JAPAN VIETNAM PETROLEUM COMPANY
 BELANAK FIELD DEVELOPMENT ( WHP 'A' & WHP 'B'); CONOCO INDONESIA INC LTD

* Nov 2001 – Juni 2002; as a Sales & Service Engineer, Site PT Kawan Lama Sejahtera Batam.
Tasks & Responsibility:
- Given picture about Kawan Lama Company to owner
- Presentation product principal or Kawan Lama Company
- Given Quotation to consumen.
- Given Presentation product Constroction tool, Mining tool, Marine equipment, Hydroulic Breaker, Hydroulic Crusher as toku product to owner.
- Negotiation with consumen about quatation product.
- To Trade Product Hand Tool, Tool, Machinery Mitutyo, Compressor ½ PK,2 PK ABAC Product. Cleaning Product Karcher.etc
- Make to Purchasing Order and Delivery Order to consumen

* NOV 2000 UP TO 2001, as a Traning, Special Project and Tecnologi Sistem (SPATS) Department, PT. Caltex Pacific Indonesia
Tasks & Responsibilities:
- Monitoring Sistem Control Automatic With Control Valve. Kota batak Gathering Station.
- Monitoring PLC (Program Logic Controller) With Schnider machine and make report to engineer.
- Reading drawing system PLC work instruction

EDUCATION & CERTIFICATION:
------------
* English Course Conducted by Learning Cottage Batam
* Positive Material Identification (PMI)/Metorex Condutected by J Ray McDermott Indonesia
* Traning Course Product by PT.Kawan Lama Sejahtera Batam
* Training Courses Coating & Painting Inspector by IKBAL-M-YOS BATAM approve by APITINDO & MIGAS Certificat No.60 CI-II/XII/2006
* Training MT/PT conduct by PT Mc Dermott Indonesia 2007
* Course Visual Welding Inspector CSWIP 3.0 Conduct The Welding Institute (TWI) Cert No:07/WIS1/BTM/282

ADDITIONAL INFORMATION:
------------
fotball,fishing, hiking

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2856)

Go to Search Parameters...

Brief Description

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Primavera 3.1- P3E , P5 Planner / Scheduler

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

Aerial and Underground Telecommunications Experience for over 20 years

Electrical Power Engineer (Project and Planning)

Working in Saudi Arabia I gained valuable practical experience, I also developed my project management, communication and organizational skills, essential attributes in order to lead in my field by building a solid technical and theoretical background.

6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E , J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDB

Estimator

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

have plenty of site experience .always worked with big organizations. well computer literate. worked on power station ,industrial and residential buildings

I am a diploma holder in mechanical engineering having 7 years experiance in metalic /non metalic piping both above and under ground

Mechanical Engineer - Inernational Purchasing - Project Management

A competent engineer with a broad range of skills and experience in civil and structural engineering works. Highly self motivated and capable of working under pressure. Seeking employment to broaden my skills and experience with a view to developing a career in construction management

Experience mostly in construction Company, Infrastructure Project, Power Plant, and Railway Project.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Iam a Mechanical Engineer with Technical sales experience in various industries . I am having good communication skills and flair for sales. I like challenging jobs with a target oriented approach. I am sincer, hardworking,and a honest guy. My hobbies include socialising ,travelling,reading

ACI, MCA, Density, Concrete, Agg.Certified

Welding inspector piping & structural

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Planning Engineer Infrastructure ,Oil & Gas & 5 years

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out