Resume - Ability to perform under pressure,Ability to work in a team or independently,Ene...

Misco Jobs

Resume #65355

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To obtain a challenging position, where I can contribute my skills to the industry, which I am

Working.

EDUCATIONAL QUALIFICATION:

* 10th std Matriculation Board Secured 63%

* 12th std State Board Exam Secured 71.8%

* Degree in Bachelor of Science (Physics) Secured 54%

KEY SKILLS:

* Ability to perform under pressure.

* Ability to work in a team or independently

* Energetic, enthusiastic with a flair for customer service.

STRENGTHS:

* Strong will to achieve multiple tasks.

* Maintaining a good interpersonal relationship.

PERSONAL PROFILE:

Name: G.Hariharan

Date of Birth: 03.07.1981

Father's Name: S.Ganesan

Home Address: 1/169, Mogappair East,
Chennai,
Tamil Nadu,
India.
Pin Code: 600 050

Contact Telephone No: 0091 9444582153

Address for Communication: No.2561, 3rd main road,
Mathur, Manali,
Chennai.
Tamil Nadu.
India.
Pin Code: 600 068

Educational Qualification: B.Sc. (Physics)

Language known: Hindi, English, Tamil and Malayalam.

Technical Qualification: ASNT Level II RT
ASNT Level II UT
ASNT Level II MT
ASNT Level II PT

Passport No. & Validity: E 3741403, 01-01-2013

Position: NDT Coordinator cum UT Operator

Employer: EXOTHERM EQUIPMENTS L.L.C
(An ISO 9001 Certified Company
(Heat treatment & NDT Services)
P.O.Box.111894,
Al Quoz Industrial Area,
Dubai – UAE.

KALVA ENGINEERS PVT LTD,
(An ISO 9001 Certified Company)
210- J, haripriya complex,
Habsiguda,
Hyderabad
India
Pincode-500 007

Super Quality Services,
(An ISO 9001 Certified Company)
56/3, Trichy-Pudukottai main rd,
Mathur.
Pudukottai
Tamilnadu
India
Pin Code-622 515.

Experience: 5 1/2 yrs

Reference:
Mr.Yakoob Hassim
(M.D. for M/S Exotherm Equipments LLC)
Dubai-UAE.

Mr.K.S.R.Chandramurthy ASNT Level III
(M.D. of M/S Kalva Engineers Pvt ltd)
Hyderabad, Andra Pradesh, India.

Mr.V.V.V.Brahmaji Rao, ASNT Level III
(Project Manager of M/S KEPL)
Hyderabad, Andra Pradesh, India.

: Mr.T.Tamilselvan,
(M.D. of M/S Super Quality Services)
Trichy, Tamilnadu, India.

: Mr.S.Prakash, ASNT Level III
(Level III for M/S Super Quality Services)
Trichy, Tamilnadu, India.

RESPONSIBILITY:

* Co-ordination with customers.

* Conducting training program in UT, RT, MT and PT for the fresh comers.

* Carry out the Site Audits and Internal Audits.

* Involved in ISO Document Preparation

* To carry liquid Penetrant and Magnetic Particle examination.

* Preparing technique sheets and evaluation of the test results.

* Inspection and evaluation of Ultrasonic Test results as per the codes and standards.

* Report writing and Billing

Nature of Work:

* Working as Ultrasonic Testing Operator since Sep'07 to Nov' 07 with M/S EXOTHERM EQUIPMENTS L.L.C. (An ISO 9001 Certified Company) in Dubai, UAE.

* Worked as NDT Coordinator cum UT operator since Sep'05 to Aug'07 with M/S Kalva Engineers pvt ltd (An ISO 9001 Certified company) in Jamnagar Reliance Industries Limited.

* Worked as NDT Technician since Apr'02 to Aug'05 with M/s Super Quality Services (An ISO 9001 Certified company) in Trichirapalli, Tamilnadu.

Radiography:

Job involves Radiography of Pipe & Plate weld joints, various castings, valve bodies' etc using

Gamma ray & X-Ray. Also involved in film processing and Interpretation of results as per codes

And standards and reporting.

Involved in co ordination of activities with various Clients like FL Smith, Bharat Heavy

Electricals Limited, Nuclear Power Corporation of India Limited, Tata Projects Limited, and Tamil

Nadu Papers Limited, Neyveli Lignite Corporation etc. Having knowledge in various materials like

Carbon steel, Stainless steel, Castings, cast steels etc of grades ASTM A216 Gr WCB, WCC etc.

Having knowledge on various codes like ASME Sec VIII, ANSI B31.3, API 1104, ANSI B31.4,

ASME Sec V etc.

Ultrasonic Testing:

Job involves Ultrasonic testing have Pipe to Pipe, Pipe to elbow, structural jobs and Nozzle joints

And Interpretation of results as per codes and standards and reporting.

Having knowledge in various materials like Carbon steel, Alloy Steel, Stainless steel, Castings,

Cast steels etc of grades ASTM A216 Gr WCB, WCC etc.

Having knowledge on various codes like ASME Sec VIII, AWS D 1.1, ANSI B31.3, ANSI B31.4,

ASME Sec V etc.

Having Knowledge in various welding types like SAW, SMAW, GTAW, MIG etc.,

Magnetic Particle:

Job involves testing of Weld joints- Finished welds as well as back gouged weld surfaces, testing

Of castings, valve bodies and components, Interpretation of results as per codes and standards

And reporting.

Dye Penetrant Testing:

Job involves testing of Weld joints- Finished welds as well as Back gouged weld surfaces and

Interpretation of results as per codes and standards and reporting.

Shutdown Experience:

* Worked as an Ultrasonic Testing Operator in M/S Karnataka Thermal Power Corporation in Bellary during Mar'07 – Jul'07 on behalf of M/S Kalva Engineers Pvt Ltd.

* Worked as an Ultrasonic Testing Operator during the Sep'05 - Dec '05 in
Reliance Industries Limited shut down on behalf of M/S Kalva Engineers Pvt Ltd.

* Worked as a Radiographic Testing Technician during the Jan'05 – Feb'05
CMS Power Corporation (Neyveli) shut down on behalf of M/S Super Quality Services.

* Worked as a Ultrasonic Thickness Gauge Operator in M/S Mettur Thermal Plant,
M/S Thoothukudi Thermal Plant and M/S CMS POWER (Neyveli) during the year 2003 and 2004 Shutdown on behalf of M/S Super Quality Services.

EQUIPMENTS HANDLED:

* Radiography Camera: Ir-192- Rolli, Techops, Spect 2T, Amertest 660
Co-60- Amertest

* Ultrasonic Testing: EX 10, PX 10, Sonatest 140,240,330,340.

* Magnetic particle Testing: Prod method, Yoke method (AC and DC) and
Head Shot method both wet and dry method

* Liquid Penetrant Testing: Both Wet and Dry Method

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2815)

Go to Search Parameters...

Brief Description

1) GULF EXPERIENCE (21 YEARS). 5 YEARS EMPLOYED AS PROJECT ENGR IN ALMORAM CO SULTANATE OF OMAN. 2)Past 9 years from 1989 to 1998 worked as E& M Engineer at UNITED CONTRACTING Company. 3)3) 7 Years ( 1977 – 1984) worked as maintenance supervisor in ARAMCO at SAUDI ARABIA.

Full Project Life-Cycle Control and Maintenance Implementation.

BS Electronics and Communications Engineering, Proficient in Microsoft Office XP (Word, Excel, and PowerPoint), Taken up CCNA Sem 1-4 of CISCO Networking Academy, Knowledgeable in Autocad,

More than 25 years experience in electrical field.

Civil & Structural & QAQC Construction Superintendent

Hands on experience in planning, erection, commissioning and trouble shooting of Cement Plant Machinery. Additional experience in Refractories for kiln and Steel Casting parts for Cement Plants. Diploma In Mechanical Engineering (4 years - Industry Integerated from Larsen & Toubro Institute)

To build a strong career in the industry, take up more challenging assignment, responsibilities and rewarding career in the excellent working environment and move up the ladder by working towards achieving organizational goals and objectives.

Ability to perform under pressure,Ability to work in a team or independently,Energetic, enthusiastic with a flair for customer service

Experience in all theoretical and practical aspects of construction surveying, exposed to international safety standards experience in segment lining tunnel (TBM and EPBMs) and NATM Tunneling, Topographical Survey, wriggle survey, Siffa Gantry and Slip Form Gantry, Laser Fixing in tunnels,Rockboltin

Structural Engineer

Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries

Civil engineer

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

Phisicyst with Power Electronics specialization

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

30 years experience soils concrete and asphalt testing, radiation safety officer, Laboratory technician/supervisor/manager. Full responsibility of laboratory procedures, reporting, calibrations,training of technicians and administration of office.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Network Planning including load flow, short circuit and transient stability studies using PSS/E and various other planning softwares

Civil engineer with 17 years experience

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out