Resume - Instrumentation Field Engineer

Misco Jobs

Resume #66684

CONTACT INFORMATION:
View contact information...

Objective:

Supervision, Systemization/Start-Up Engineer. Electrical/Instrumentation Field Engineer, QA/QC Engineer.

Experience:

December 2003
to Present
Plant Engineer Parsons Engineering
Newport Chemical Disposal Facility, Newport, Indiana

Provides technical assistance and guidance to all discipline engineers.

Keep the client (government) notified of all problems that occur with my assigned areas of the plant.

Assures the timeliness and accuracy of all as-built drawing to document control.

SME over all DPE radio and communication equipment.

In charge of all PCN's (process change notice) to be implemented in the plant and follow through to make sure these changes were done correctly with redline and as-built drawings to be incorporated into Document Control.

Performs other discipline related work, as required by the Engineering Manager.

Rockwell Automation Control Logix training for Programming and Troubleshooting PLC's.

Delta "V" training for Hardware and Communicating.

Leader in investigation teams using Kepner Tregoe.

March 2003
to November 2003
Start-Up Technician
A.E.S Generation Station, Huntington Beach, California

Start-up and checkout on 250 MW Westinghouse steam turbine and boiler. Calibration, repair, replace and documentation on all instruments. Check all points on GE/Woodward/Micronet turbine control.

October 2002
to March 2003

Instrument & Electrical Inspector
Orion Refining & Marketing, Laplace, Louisiana

Inspect to ensure compliance with all applicable codes, standards, and specifications. Documents nonconformance and participates in determining appropriate resolution. Report to client on progress.

Sept. 2001
to October 2002

Instrument & Electrical Inspector
A.E.S. Generation Station, Huntington Beach, California

Inspect to ensure compliance with all applicable codes, standards, and specifications. Documents nonconformance and participates in determining appropriate resolution. Report to client on progress.

May 1993
to Sept. 2001

Instrument & Electrical Technician
Texaco Refining & Marketing, Wilmington, California

Maintenance on Electrical and Instrumentation equipment. Familiar with all Units in the refinery i.e.DCU,Coker, FCCU, Alky, Hydrocracker, Cogens, Boilers and Turbine Generation Stations for plant power. Have had intense training in electrical and instrumentation throughout Texaco. Capable of maintaining electrical and electronic equipment, Flow, Pressure, Temperature Controls to the TDC. Capable of TDC-2000, Honeywell TPS-3000 with GUS Stations, troubleshooting and repairs. Knowledgeable of Honeywell, Rosemount, Foxboro, Fisher and Moore, Triconex Version 7, Allen Bradley PLC Programming & Troubleshooting. Bentley Nevada and Dymac vibration monitors, Shand and Jurs Varec Tank Gauges, Brooks Flow Meters, all electrical switches and limit switches, all types of temperature elements, Thermox and Rosemount O2 Analyzers. Instrumentation and Fisher, Valtek and Masoneilon valves. Familiar with all electronic calibrators associated with instrumentation. Fluke 744 & Cornerstone.

August 1989
to May 1993

Instrument & Electrical Technician
Instrument Specialist Co., Wilmington, California

Maintenance of Electrical and Instrumentation at the Fluid Catalyst Cracking, Alky and Cogen Unit. Job Duties: Calibration of electronic pneumatic Instruments and TDC-2000&3000 PM's. Up to 480v electrical problems.

September 1983
to July 1989

HVAC Technician
Robinson Heating & Air, Baton Rouge, Louisiana

Troubleshooting and repairing heating and air conditioning units. Part-time for duration of Instrumentation course at ITI.

Skills:

My ability to perform any task that is presented to me in a safe and timely manner is my bright spot.

My ability to work well with others is extremely and highly recognizable.

My dependability and organization for any job I have ever been on is outstanding.

My ability to absorb a problem and come up with a solution in a timely manner is one of my key points.

My specialty is the way I handle pressure.

Education:

International Technical Institute

AA Electronics Baton Rouge, Louisiana
July 1989
Electronics, Instrumentation and Electrical Institute.
KEPNER TREGOE "Problem Solving and Decision Making"

Organizations:

Emergency Response Team - Fire Department
Was a member of the Fire Brigade for 8 years. 80 hours a year fire fighting training. Fire Training includes Manufacturing, Strategy and Tactics, Incident Command, Hazmat, First Aid and CPR certification.
Inspector on three rebuilds on fire damaged units, and one new construction unit.

Participated on many Hazop, Safety, and Planning & Down Period/Turnaround Teams.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 2856)

Go to Search Parameters...

Brief Description

GSM/CDMA Project Manager

Responsibilities and Experience :

Installation and commissioning, project management

B.tec(mechanical);Autocad;Pro-E;Autoplant;Caesar-II;PDMS

Instrumentation Field Engineer

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Site Engineer, Operations Control SPecialist, BAggage Attendant, Buyer

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

NEBOSH level 6, NEBOSH Level-3, IOSH Managing Safely, Diploma in Fire Engineering, Diploma in Industrial Sfety

Substation Automation/SCADA/DMS/EMS : AREVA PACIS, S900, EMS, DMS, Ettera Control, Habitat

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Experienced in design & engineering - feasibility, conceptual study, basic and detail engineering, project management(EPC,EP,MC,PMC), proposal preparing, in the field of oil and gas and petrochemical industry

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Maintaining maintenance log of all machinery, inventory control, Job identification and distribution among specified man power, Briefing about a job , safety equipments and techniques involved.

Logistics ILS Provisioning LSA LSAR LMI Contract Mil-Std-1388-2B

Diploma in Mechanical Engineering

I am graduate and have a diploma of instrumention and process control with 9 years exp in diffrent industries

Facility Manager

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

Senior painting inspector (c swip grade 2)

1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.

Diploma In Mech.Engg (spl.in Automobile Engg),Having state of art in hydraulic system, engines, and transmission of Excavators, wheel loader and Dumpers etc.

Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.

Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.

Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar

After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects

Have around 17 years in the area of Industrial & Process Automation including Safety Systems, which involves Study of process, application development, testing and implementing Control systems Software and Hardware

GIS Expert (Esri & Geomedia)

Mechanical Eng. knowledge and experience in auto industry, applicable to other areas of Engineering. Computer software & hardware knowledge including Simulations, FE analysis in PC, Unix workstation. Expert in developing new processes with implementation and training

Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.

Logistics Manager, Rig Manager, Materials Manager

Bachelors - B.A., Applied Mechanical Engineering

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

willing to work in a challenging Electrical carrier

DOCUMENT CONTROL MANAGEMENT, PROJECT SUPPORT, TECHNICAL & DESIGN COORDINATION, EDMS..ETC

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out