Resume - Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Com...

Misco Jobs

Resume #6680

CONTACT INFORMATION:
View contact information...

SPECIALIZATION:
Rotating Equipment (Repair and Maintenance)
Compressors, Gas Turbines and Steam Turbines

An "ASME Authorized Global Training Instructor" Mechanical Engineering"

Previous Assignment:

MAN TURBO, India
Designation, Department Head, Services
(Workshop Engineering & Field Service)
From: 26th Jul 1999
Till: 31st Aug 2006

Responsibilities at MAN TURBO:

Repair Engineering for Compressors / Steam Turbine and Gas Turbine Internals

Receipt of Inquiries and conducting technical review

Preparation scope of work and detailed repair Engineering work steps

Determine material requirement, Special processes and cost calculations

Structure technical portion of offer for presentation to customer

Establishment of repair activities of rotors of third party machines (Non-Man Turbo) by Reverse Engineering

Support Marketing and Sales Managers by accompanying them to customers for Techno-commercial negotiations.

Interact with customer and address technical queries and clarifications with reference to API and IS standards, Engineering and Maintenance practices of Turbomachiney.

Oversee execution of Repair work carried out by Workshop Manager with a view to maintain quality standards, finalize inspection, and repair report.

Preparation of work procedures for various activities being carried out in the workshop as a part of preparation for ISO certification.

Field Services:

Receive inquires from customers and operators for requirement of Troubleshooting, Overhauls and other site activities including Erection and Commissioning of new machines.

Provide technical support to Field service engineers, consisting of Mechanical Field service Engineers and Commissioning Engineers deployed at site.

Preparation of scope of work and costing for turnkey projects being executed at various sites.

Authorize Field service reports on after completion of field service activities for submission to customers and principals.

Landmark achievements in Establishment of MAN TURBO Service Workshop from Grass root:

Installation and commissioning of machinery at the workshop

Preparation of procedures for inspection and repair of Compressor and Steam Turbine rotors.

Installation and calibration of low speed balancing machine and execution of balancing jobs.

Establishment of Repair of Gas Turbine repair activities in the workshop with able support and training from Man Turbo German Specialists.

Testing, development and Implementation of Atmospheric Plasma, Dee Gun coating processes for Compressor and Steam Turbine rotors.

Development of vendors for Diffusion coating and Regeneration of Gas Turbine Blades, Vanes and other components.

Establishment of sub-suppliers and development of Honeycomb seals for Gas Turbines.

Played a pivotal role in Design, Installation and establishment of High Speed balancing facility under vacuum condition.

Training and development of Full-fledged Field service department for deployment for customers' sites situated world wide, for Erection, Inspection, Overhaul and Commissioning of Turbomachinery.

SIEMENS:
(Formerly Demag Delaval Industrial Turbines)
From Feb 1996 – Jul 1999
Position: Assistant Manager (Erection & Commissioning)

Major Responsibilities:
Trained, Qualified and authorized by Demag Germany, as Commissioning Engineer

Erection, Commissioning, Overhauling and Trouble shooting of Large Process compressor trains at Petrochemical, Air separation, Refinery and Steel plants

Service consulting to customers for operation and maintenance problems.

PROFESSIONAL REFERENCES:
Available upon request

EDUCATION:
Qualification: Bachelor Degree in Engineering
Duration: 4 years
Year: Jan 1977 to Jan 1982
Main Subjects: Mechanical Engineering
Institution: Naval College of Engineering / Ministry of Defense

Qualification: Flight Engineer Course
Duration: 1 year
Year: Jul 1984 to Jul 1985
Main Subjects: AI 20 M Engine, controls and Inspection
Institution: Naval Air Technical School / INAS 315

Qualification: Bachelor Degree in Engineering
Duration: 1 year
Year: Aug 1992 to Jul 1993
Main Subjects: NK 12 MP Engine, controls and Inspection
Institution: Naval Air Technical School / INAS 312

Professional Courses and Training undergone

Course: Repair Engineering and High speed Dynamic Balancing
Duration / Year: 3 Months / 1999
Organization: MAN GHH BORSIG, works Oberhausen and Berlin Works
Main Subjects: Repair Engineering of Internals of Rotating Equipment

Course: Erection and Commissioning Turbomachinery
Duration / Year: 3 Months / 1996
Organization: Demag Delaval Turbomachinery, Germany, Duisburg
Main Subjects: Assembly, Erection and Commissioning of Compressors

Course: Advanced Leadership and Management Course
Duration / Year: 4 weeks 1990
Organization: Naval School of Leadership and Management
Main Subjects: Personnel Management, Project Management

Course: Mid Career course
Duration / Year: 8 Weeks /1986
Organization: Naval Air Technical school Cochin
Main Subjects: Technical and Maintenance Management, Material science

Course: Leadership course
Duration: Year: 4 weeks / 1983
Organization: Naval School of Leadership and Management
Main Subjects: Leadership, planning and organization

PERSONAL TRAITS:
I have been an extremely successful team builder and a leader who believes in leading from the front and an effective communicator, both in oral and written mediums. I seek responsibility and motivate people around by self-example, enormous drive and enthusiasm. One who believes in self-help to thrive under challenging environment.

I enjoy robust inner and physical health with a strong conviction in self-reliance, to thrive under challenging environment. I evince interest in several major games and Athletics and follow regular fitness regimen.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 2814)

Go to Search Parameters...

Brief Description

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

BS in Mechanical Engineering from India, 36 years of Petrochemical industrial Experience in NDT & Vibration analyses field.

To obtain a Full Time position as an Electrical/ Hardware Engineer.

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

Project control engineer with experience in planning and cost engineerig fields.

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Expertise in Project Engineering, Cadd Management & related fields.

Fully experienced HSE Coordinator,Supervisor,Advisor comfortable in Oil&Gas,Construction and Military environments

ELECTRICAL ENGINEER

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Lead construction engineer (structural, methods, lifting, marine)

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Electrical Engineer, Six Sigma, Lean, Manufacturing

33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

More than 20 years E&I experience of Maintenance & Commissioning within the Oil & Gas Industry. Enjoy working as part of a team but I can also operate independently when required. Self-motivated, resourceful, adapt quickly to new working environments, easily integrate into multi-cultural operations

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Buyer, Purchasing Agent, 38 Yrs. Material Handling and Purchasing Experience

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Seven years experience in quality control and quality assurance, welding inspection, Nondestructive tests (RT, UT, PT& MT),destructive tests (tensile,bend,hardness, macroscopic, impact, corrosion,...), in the fields of (Pressure Vessels,Boilers,piping, steel structure , tanks & Pipelines) at gas &

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Quantity surveyor, estimation and land surveying works

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Civil engineer having knowlegde and working exposure of AutoCad 2000 and Staad 2004

Construction Project Manager, Property Development Manager

Electrical and Instrumentation Technician/Engineer with significant experience in Construction, HUC and Maintenance in the Petrochemical and Oil & Gas Industries at Technician or Engineer levels for companies with several large development projects ongoing at once.

Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.

Engineering/Operations professional with sixteen (16) years of experience managing multi-disciplined projects.

having 5 years experence by using cad tools such as proe catia associated with automotive\offhighway industries

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

B.Sc., industrial Engineering with 10 years experince. in project organization , planning and control, contractor for the construction and utility project, line production planning and control. Quality control and assurance, maintenance, system analysis and inventory control.•gripe with relevant int

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out