Resume - Project Manager/Lead Technician/Fiber Splicer/Inspector

Misco Jobs

Resume #67278

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Seeking a Career Opportunity within the Telecommunications Industry as a Project Manager/Lead Technician/Fiber Splicer/Inspector in Fiber Optic Networks.

TRAINING:
- April 2001- BICSI Testing, Certifying and Troubleshooting Copper and Fiber
- June 2000-Corning Cable Systems (SIECOR) TR-07-S
- June 2000-Hands-On Fiber Optic Installation/Assembly for Local Area Networks
- October 1999- B&B Consulting Services Fiber Optic Theory, Splicing & Maintenance

EXPERIENCE:
2007-2007 TekSystems, Inc., Downers Grove, Chicago, IL
- Instrumental in the mobilization of splicing crews to perform Mass Fusion splicing of Ribbon Cables and Single Strand Cables in the fiber count of 4 fibers to two-hundred-eighty-eight fiber count
- Experienced in man-hour accounting, cost effectiveness, and material accountability
- Performed as Field Foreman/Fiber Splicing/Technician for FTTP, through contract for Turn-Key Network Solutions Inc. on a 200,000 square acre (excess of 1200 homes) upgrade in Clay County, IN
- Responsible for the preparation/interpretation and installation of an excess of 160 Pedestal enclosures consisting of various Single-Mode Ribbon Fiber Cables within specific routing and backbone installation through schematic, blue prints and as-builts
- Responsible for Bi-Directional testing utilizing O.T.D.R. and Certifying OSP/ISP utilizing LS/PM
- Initiated accurate documentation, daily reports, time stamps, field notes
- Expeditiously acquired/maintained daily inventory of quantities of consumable materials and hardware to ensure daily production status were met
- Repetitively ensured parts needed and ordered with cost effectiveness utilizing local vendors to reduce lead/lag down time
- Performed as Field Manager of 3-7 crewmen while maintaining constant communication of Project status with Divisional Personnel
2003-2007 MasTec ITS of North America, Fayetteville, NC
- Performed in excess of one million miles of aerial and underground cable installation and construction combined
- Performed an excess of 5000 Fiber Optic Cable Terminations utilizing factory pigtails and connectors both OSP/ISP
- Performed in excess of 5,000 fusion splices utilizing Mass Fusion and Single Strand
- Experienced in the installation/construction of 50+ CCTV
- Maintained and performed Fiber Optic Bi-Directional test utilizing O.T.D.R. and certifying OSP/ISP utilizing LS/PM
- Responsible for the Field Management of 3-4 crewmembers during Project Deployment
2002-2003 Fleet Communications, Inc. Greensboro, NC
- Performed in excess of 12 miles of aerial and underground combined cable installations/construction
- Performed in excess of 300 Fiber Optic cable field terminations utilizing anaerobic connectors
- Performed in excess of 3,000 fusion splices
- Performed in excess of 3,000 Bi-Directional test utilizing O.T.D.R and Certifying OSP/ISP utilizing LS/PM
1999-2002 Precision Contracting Services, Inc. Jupiter, FL
- Performed in Excess of 150 miles of Aerial and Underground cable installation/construction combined
- Performed in excess of 300 Fiber Optic field terminations
- Performed in the excess of 7,000 fusion splices
- Experienced in Mass Fusion and Single Strand Fusion splicing of Single Mode and Multi-Mode cables consisting of 2 count upwards to 480 count armored coated, loose tube and buffered tube
- Responsible for testing OSP/ISP utilizing O.T.D.R. and certifying OSP/ISP utilizing LS/PM
- Experienced in copper (CAT 5e and CAT 6) installation, construction, punch-down

EDUCATION:
1997-1999 A.A.S. Degree in Computer Technology
E.C.P.I. College of Technology, Virginia Beach, VA
- Academic Achievement Award for maintaining a minimum grade point average of 3.7
- Fiber Optic Communications
- Electronic Technology I & II
- Digital Technology I & II
- Communications
- Applied Mechanics
- Microsoft Applications
- PC Upgrade & Maintenance
- Computer Peripherals

PROFESSIONAL MEMEBERSHIPS:
Electronics Technicians Association (Member)

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2856)

Go to Search Parameters...

Brief Description

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Primavera 3.1- P3E , P5 Planner / Scheduler

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

Aerial and Underground Telecommunications Experience for over 20 years

Electrical Power Engineer (Project and Planning)

Working in Saudi Arabia I gained valuable practical experience, I also developed my project management, communication and organizational skills, essential attributes in order to lead in my field by building a solid technical and theoretical background.

6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E , J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDB

Estimator

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

have plenty of site experience .always worked with big organizations. well computer literate. worked on power station ,industrial and residential buildings

I am a diploma holder in mechanical engineering having 7 years experiance in metalic /non metalic piping both above and under ground

Mechanical Engineer - Inernational Purchasing - Project Management

A competent engineer with a broad range of skills and experience in civil and structural engineering works. Highly self motivated and capable of working under pressure. Seeking employment to broaden my skills and experience with a view to developing a career in construction management

Experience mostly in construction Company, Infrastructure Project, Power Plant, and Railway Project.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Iam a Mechanical Engineer with Technical sales experience in various industries . I am having good communication skills and flair for sales. I like challenging jobs with a target oriented approach. I am sincer, hardworking,and a honest guy. My hobbies include socialising ,travelling,reading

ACI, MCA, Density, Concrete, Agg.Certified

Welding inspector piping & structural

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Planning Engineer Infrastructure ,Oil & Gas & 5 years

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out