Resume - Thirteen years experience of Project Execution, Quality Assurance & Quality Cont...

Misco Jobs

Resume #67498

CONTACT INFORMATION:
View contact information...

QA-QC Engineer (Electrical & Instrumentation)

Personal Information
Nationality: Pakistani
Age: 37 years
Passport No.: AD1798081

Profile

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia, Qatar & Pakistan involved with the FAT's, Installation, Testing and Commissioning of the Up stream,Mid stream and Down Stream Complete Electrical Systems, Interfacing to all associated Control and Supervisory Systems, Plant Management Systems, Fire Alarm systems, Oil and Gas Instrument Installation,Testing,Calibration and commissioning, Cathodic protection Systems, Telecommunication Systems, installation of Fiber optical cable, Splicing /commissioning. Coordinate with clients, Engineering, construction, Vendors and sub contractors in connection with Manufacturing, construction, Quality Assurance & Quality control activities.

Education and Technical Qualification

Bachelor Degree in Electrical Engineering from Mehran University of Engineering and Technology Jamshoro Pakistan.

Seminars and Certification

MS Office, Windows XP Professional, Computer Networking.
Health, Safety and Environment Courses at PARCO Refineries Pakistan.
ISO 9001 Awareness Course at Dodsal E & C Pte Ltd
Saudi Aramco Certified Electrical and Instrumentation QA/QC Inspector
Saudi Aramco Certified QA/QC Electrical Engineer.
Qatar Petroleum Approved QA/QC Electrical Engineer/Vendor-Coordinator

Skills and Strength

 To Execute the Installation, Pre-commissioning and commissioning activities of electrical/Instrumentation Systems.
 High Voltage, Medium Voltage & Low Voltage Electrical System Installations, Testing & Commissioning as per International Quality/Safety Standards.
 To design cable specifications as per requirement, its Installation/routing.
 Good Knowledge of International Electrical Engineering standards NEC,IEC, NEMA, ARAMCO Engineering Standards, Qatar Petroleum Engineering Standards and KAHRAMA Standards.
 Design review, Preparation of Technical queries and obtain necessary approvals of client/consultant.
 Capability to lead a team of Junior Engineers/ Supervisors/QC Inspectors of Multiple Nationalities.
 Preparation of Pre-commissioning/Commissioning Packages.
 Preparation of the Mechanical Completion Packages.
 Preparation of Inspection Test Plans
 Preparation of Installation, Pre-commissioning/Commissioning and Energization Procedures.
 Preparation of Method Statements for Electrical-Instrument Works.
 Preparation of Instrument Loop Packages.
 Preparation of As Built and Shop Drawings.
 Good Communication Skills.
 Strong Ability to coordinate the project activities.

Work Experience

Company Dodsal E&C Pte Ltd
Project EPIC of Common Cooling Sea Water System Phase-2
Ras Laffan Industrial City Al-Khor Qatar
Client Qatar Petroleum
Position Sr.QA/QC Engineer (Electrical)/Vendor coordinator
Duration Sep 2007 to date

Job Responsibilities

* Coordinate with vendors, procurement and Third party Agency for the Vendor Inspections of various Electrical Equipments.
* Coordinate with Vendors for the expediting of the Manufacturing process.
* Coordinate with Vendors for the timely submission of all the FAT and QA/QC Vendor Documents.
* Coordinate with client, Engineering and Procurement for the Approval of the Materials.
* Assessment of the Vendor quality record and manufacturing process documents and obtaining client approval.
* Coordinate with Client, Vendor and Third Party for the Factory Acceptance Test Inspections.
* Review the FAT Records and coordinate with Third Party for the submission of Vendor Inspection Reports.
* Preparation of the ITP's, Method Statements, Quality Control Procedures.
* Managing the team of QC Engineers and Inspectors to cover all the construction activities as per the scope of work.
* Implementing the Quality objectives as per ISO 9001and verifying the construction activities conforming to the approved Quality control procedures, ITP, IFC & Method statements.
* Coordinate Project Quality control activities with construction, Pre-commissioning, Vendors and commissioning Groups for the satisfactorily completion.

Work Experience

Company Snamprogetti ENI Group
Project EPCC Khursaniyah Gas Producing Project
(Khursaniyah) Saudi Arabia
Client Saudi Aramco
Position QA/QC Electrical Engineer (Supervisor)
Duration Feb 2007 to August 2007

Job Responsibilities:

* Review/Approve the Inspection Test Plans, Quality control Procedures, Method Statements and Inspection Assignment Packages submitted by Contractors.
* Ensure proper implementation of Quality activities and records as per ISO 90001 requirements.
* Implement and verify the construction activities with regards to Quality control procedures.
* Review the contractors Quality control records periodically.
* Assign and Monitor regular duties of QC Inspectors.
* To ensure the design and materials meets the specifications.
* Assessment of the entire construction activities conform to approved Quality procedures and standards.
* Verify and evaluate of Contractors QC Inspectors/Supervisors prior to forward to Saudi Aramco for approval.
* Verify the conformity of inspections performed by QC Inspectors
* Evaluation of the Company and Contractors QC Inspectors performance
* Attend QA/QC Co-Ordination meetings with client, Contractors and Engineering.
* Co-ordinate the Quality Control activities with Contractors and Clients.

Work Experience

Company Arabian Bemco Contracting Company
Project Two Grades of Additional Capacity
Gasoline Northern Bulk Plants
Client Saudi Aramco
Position QA/QC Inspector (Electrical/Instrumentation)
Duration Sep: 2005 to Jan 2007

Job Responsibilities:

 Preparation of inspection reports, Quality plans, implementation, work accomplishment reports, issuance of procedure.
 Inspection of Electrical & Instrumentation equipments, materials, cables, conduits, seals, tools and all electrical material accessories to be used & installed as per client specification and Quality manual.
 Preparation of Request for Inspections for materials/Construction activities with reference to the concerned Saudi Aramco Typical Inspection Plan and Saudi Aramco Check Lists.
 Inspection & surveying of all kinds of Electrical installations, units.
 Raise Technical Queries as per scope of work and NEC, SAES, and issue Non Conformance Reports.
 Coordinate & attends weekly progress meetings with construction responsible and SA PMT.
 Maintain two weeks look ahead schedule.
 Preparation of Packages, Punch List.

Company MRK/Saudi Aramco
Project Two Grades of Gasoline and Additional Capacity
(Type TC & PLTC Instrumentation Cables)
Vendor Middle East Specialized Cables Riyadh
Position Instrumentation Vendor Inspector

Job Responsibilities

 Witnessing FATs perform visual inspections/checking, prepare inspection reports
Punch lists as per Saudi Aramco Standards 34-SAMSS-913 for more than 40,000 meters of type TC and PLTC instrumentation cables 2pair through 24 pair individually and Overall shielded.
 Testing/Inspection of Insulation thickness, screening, shields, Drain wires, marking, labeling and workmanship.
 Preparation of release note.

Company M.R.K/ Saudi Aramco
Project Plant works construction Jeddah
Vendor Saudi Modern co. for cables (Riyadh cables)
Position Electrical Vendor Inspector
Duration Sep: 2005

Job Responsibilities

 Witnessing FATs, perform visual inspections/checking, prepare Inspection reports, punch lists as per Saudi Aramco standards 15SAMSS-502 and Form -175. for 2140 meters of Medium voltage power cable CU/X/FRV 20KV 3x240
 Witness high voltage test, partial discharge test, resistance test, strip ability and
Hot set test.
 Preparation of Release Note

Company Qatar Petroleum / Med gulf construction company (W.L.L)
Project EPIC of new production and injection Wells at Arab-D in
Dukhan Field.
Vendor B.P.Solar Arabia ltd Riyadh
Position Electrical vendor inspector
Duration July 2005 to Sep: 2005

Job Responsibilities

 Perform Pre Inspection Meetings and expediting the manufacturing for 50 sets of Solar Power system of 2x80 watts Load 24VDC.
 Prepare Inspection Reports, punch lists, Ncrs.
 Witness power capacity test of solar modules, functional tests of charge regulators, controllers, and Load distribution Boxes, DC/DC converter, Batteries, and Environmental test of photovoltaic solar modules.
 Visual inspections to check and witness the manufacturing status, BOM materials, Tagging, packing, shipment arrangements.
 Prepare Release note.

Company Technicas Reunidas
Project Saudi Aramco, Yanbu Refinery DHT Project
Vendor Isa Mannai / CPIC Facility-khobar
Position Electrical Vendor Inspector
Duration Feb 2005 to June 2005

Job Responsibilities:

 Visual inspection for witnessing FATS, preparing punch lists for analyzer shelters of four different types manufactured by CPIC for Aramco.
 Witness tests of PLC system, fire detection and alarm system, tubing alignment checks, gas detection system, shelters combustible gas and hydrogen sulphide system, engineering services, sample conditioning system, purges to meet the class 1 Div: 2 classification of Hazardous locations, proper Installation and Identification of the equipments like pressure switches, Heat trace Jbs, thermostats, analyzers, UPS, Non UPS circuit breakers, explosion proof disconnecting switches, explosion proof receptacles, printers, gas cylinders, chillers, vent lines, analyzers, internal wiring, equipment grounding,.
 Review ITP, Material certificates, P.O and drawings.
 Preparation of Inspection reports.
 Meetings with vendor to expediting the works.
 Prepare release note.

Company Qatar Kenz/ Qatar Liquified Gas Company/Velosi Qatar
Project EPCC of Camp Facilities at QSII and Construction Camp
Qatar Liquified Gas II Onshore Expansion Project
Vendor ABB Electrical Industries Riyadh KSA
Position Electrical Vendor Inspector
Duration Nov 2004 to Jan 2005

Job Responsibilities:

 Attend Pre-Inspection meeting as client representative to develop agreed inspection and test plans with vendors, expedite the works.
 Performing Inspection of Electrical materials/ equipment during manufacturing and final stage of production /assembly at the vendor's factory in accordance with the client's requirements and international standards (NEMA, NEC.IEECetc).
 Visual Inspections, testing, preparing of FATS of 55 numbers of compressed sub stations comprising of Ring Main Units, Distribution Transformers 1500 KVA(13.8 KV to 0.48 KV) and Low voltage switch Gears, Mechanical /Electrical interlocking system, workmanship, ratings of ACB's, MCCB's,CTs, VTs, Bus bars, fuses etc and setting of the devices as per approved drawings.
 To witnessing the Transformer heat rising tests, pressure test of transformer tank with alarm and trip, oil temperature raise test alarm/trip, winding temperature raise test with alarm/trip, short circuit tests, insulation tests/meggering, high voltage withstand test, checking arrangements and calibration reports of testing equipments prior to carry out testing.
 Witnessing shipment arrangements and preparing inspection reports and Release note.

Company Arabian Construction & Maintenance Company Ltd.
Client Saudi Aramco and Kuwait Gulf Oil Co.
Project AL-khafji joint operations
Position Electrical and Instrument Engineer (Project Execution)
Duration Jan 2004 to Nov 2004

Job Responsibilities:

 Equipment and material take off, procurement and other related engineering works prior to the commencement of the construction works.
 Progress reports preparation, work scheduling.
 Review drawings, specification details as per scope of work.
 Surveying of the cable roots, installations and units.
 Up-date as built drawings regarding the actual revisions and changes of all
 Electrical and instrument activities.
 Controls and update drawings, specification, submittals received and approved by the client for construction site copy/issued for construction (IFC).
 Prepare necessary documentation needed for project acceptance and Turn-over.
 Over all responsible for incoming and outgoing documents to the client and sub-
contractors.
 Coordinate and attends weekly progress meetings together with the client and sub-
contractor's representatives.

Company CPECC Techno Consortium Pakistan
Client Pak Arab Pipeline company/Pak Arab Refineries
Project White Oil Pipeline project
Position Electrical & Fiber Optic Cable Engineer(Project Execution)
Duration Feb 1999 to Dec 2003

Job Responsibilities:

 Surveying, Installation, Hauling, Splicing and commissioning of 1027KM Fiber Optic Cable from Karachi to Mid country Parco Refineries.
 Overseeing all civil works for entire communication system, repeater stations and White oil Terminals Grid Stations, Sub-stations.
 Termination of RTUs and interfacing with existing Micro Wave stations.
 Equipment and Material Take off, procurement.
 Installation and commissioning of FOC for LAN at PARCO REFINERIES and
White Oil Terminals.
* Installation/Testing/Commissioning of Power Transformers Step-up/step down at Plant Grid Stations.
* Installation, pre-commissioning, Commissioning of Switch Gears, Control Gears, Motors, Generators.
 Installation and testing of Battery System and UPS.
 Support and assist the client and sub-contractors during testing and commissioning
Of the Electrical and Instrument Equipments /systems.
 Installation, energization, testing and progress reports preparation, work scheduling.
 Coordinate and attend weekly progress meetings together with the client and sub-
Contractor's representatives.
 Preparation of As Built drawings.

Company Tahir Engineers and Contractors Karachi Pakistan
Client Pakistan State Oil Company
Project Oil Terminals Expansion Project through out country.
Position Site Engineer (Electrical)
Duration March 1996 to Dec 1998

Job Responsibilities

 Installation and commissioning of Low voltage panel boards, Medium voltage Switch Gears.
 Installation and commissioning of Motors up to 400 HP.
 Installation and commissioning of Transformers and Generators up to 1500 KVA.
 Installation and termination of lighting towers at Hazardous areas.
 Design of Complete distribution system.
 Installation of cable trays.
 Installation and commissioning of Flow meter, flow control valve
 Differential pressure transmitters and PLC system at PSO Boosting pump station.
 Planning /scheduling of job activities and procurement of materials.
 Coordination with client and approval of works.

Company Systematic Engineering Co Karachi Pakistan
Project National Refinery Karachi, PSO, Javedan Cement Co.
Position Site Engineer (Electrical)
Duration Jan 1995 to Jan 1996

Job Responsibilities

 Manage, execution and supervision of project "Providing Earthing/Grounding Protection facilities and Decanting facilities" to 325 PSO Stations through out Pakistan (A project launched by P.S.O) as to meet with the international standards of Safety, Health & Environment.
 Periodic maintenance of transformers and generators.
 Maintenance / Repair of industrial motors, switchgears, control gears, transfer switches and panel boards.
 Improvement of power factor – installation of capacitors as to improve power factor at various industries.
 Planning and scheduling of job activities and procurement of materials.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 2856)

Go to Search Parameters...

Brief Description

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Havin total 30 yrs experience out of which 20 yrs in all types of cranes-and 6 yrs in Bulk material handling field like stackers/Reclaimers etc.

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

Civil Structural Design Engineer with over 6 years of experience in the field of Design, Finite Element Analysis, Stress Analysis. Currently working on fast track multimillion dollar, complicate & intricate International construction projects in a contracting company in Dubai, U.A.E.

Senior Marine Facilities Engineer, Highest qualification: B.Sc (Eng) Civil, University of Cape Town, 1989, Overall working experience 16years, specializing in Marine Terminals, Harbor and Coastal Structures, Oil & Gas Development and Port Infrastructure Projects.

Interior designer-Architectural presentation artist

Highway Design, Pavement Design, Economic and Financial Analysis

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

Having Gulf experience and 10 years long employment in contract preparation & negotiation, tendering & award procedures. Conversant with FIDIC and INCOTERMS.An certified ISO Internal Auditor.

Electrical Engineer with 2 years experience i Transmmision line Commissioning, SCADA, Volumetric Batching(Foundation work), RTU/PLC in SCADA

Strong ability to work both independently and as part of a team. Possess effective time management and organizational skills. Familiar with S-Frame, AutoCAD, MS Word, Office, and Excel. Experience interacting with field crews and subcontractors.

Project planning with MSP & preparing 2D/3D sketch, ISOs, GADs, Plot plans.

Post Graduate Naval Architecture from IIT Kharagpur , sound knowledge of naval architecute and structural designing

Design of Distribution and power transformers upto 66kV class and 20MVA. Have knowledge of singlephase, amorphous, dry type and pad mounted transformers

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

More than 10 years in construction supervision, including accurate takeoffs, estimating, budgeting, purchasing, and invoicing.

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Search for job in car or food industry.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

An enthusiastic self-starter with strong leadership and communications skills. proven academic and curricular achievements, and possess the right technical and soft skills required to propel the organization achieving its goals and objectives.

I have attached my resume for your consideration regarding your current needs.

Project Manager

BHS Engineer

Mechanical engineer having 2 + years of experience in machine manufacturing , Solidworks being the design tool

I am an HVAC ENGINEER from India having good knowledge of Textile Air Conditioning, Pharmaceutical air conditioning , Clean Rooms, and Normal comfort air conditioning till date i have executed around 8000 TR of Jobs. presently working in United Arab Emirates as a Project Engineer.

LSIT, total 12 years of surveying

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

AutoCAD, Revit, 3D Animation

PLC programming,control design,piping,branch circuits.

Senior Instrumentation & Control Systems Engineer

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Erection & commissioning

mechanical engineer with 2.25 years experience in automotive field

Planning/scheduling, progress monitoring, procurement of project material, site coordination, progress reports and site co-ordination

QA/QC Engineer/Inspector

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

detailed engineering/design of offshore rigs and ships

Senior Autocad Draughtsman (Architecture/Structure/Civil)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out