Resume - Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geo...

Misco Jobs

Resume #68345

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist: research and development of oil field chemicals designed to remove CO2 & H2S gas; geologic mapping and map drafting - including cross sections, structural contouring and potentiometric surfaces; mud logger and mud engineer experience on oil and gas drilling rigs; logging drill hole cuttings on gold exploration and water well drilling projects; interpreting geologic (mud) logs and geophysical logs, chemical and geochemical data collection and analysis, and technical report writing; hydrologic and geologic mapping, computer aided drafting of isopach maps with 3-D applications; surface geophysical surveys (spontaneous potential, electrical resistivity); open pit (surface) mine surveying and drafting with AutoCAD; ground water flow path modeling using NETPATH; petrographic analysis, ore microscopy, fluid inclusion studies, and geotechnical engineering experience. Certified with 40 hours OSHA /HasMat training.

EMPLOYMENT & CONTRACT WORK
06/2007 to Present: As a geologist for Surbec Environmental, I performed field operations that included drilling supervision, soil and water sampling, slug and injection tests, and office work that included isopach/contour mapping of contaminant plumes with cross sections, ground water gradient maps and calculated 'K' values (hydraulic conductivity) for the contaminated aquifers on UST remediation sites. Presented isopach maps w/ cross sections and ground water gradient maps to State officials for approval of proposed remediation projects.

01/2006 to 03/2007: Mud Engineer with Halliburton/Baroid, Drilling Fluids Division. Experience includes drilling fluid services (drive-by and 24 hour service) for a variety of operators using large to small drilling rigs on vertical and horizontal oil and gas exploration wells drilled in Oklahoma, Arkansas and Texas. I developed a method of use for standard water base drilling fluid chemicals that created a tougher wall cake that helped prevent frequent lost circulation episodes in horizontal wells drilled in the Hunton Formation northwest of Enid, OK.

08 to 12/2005: Adjunct Professor of General Chemistry at Redlands Community College and Earth Science at Oklahoma City Community College (fall semester 2005). I also taught night courses in Physical Science (spring semesters 2001, 2002 & 2004) at Redlands Community College and Oklahoma City Community College while contracting and working other jobs and General Chemistry courses with Labs (spring 2003 & fall, full-time 2005) at El Reno.

04 to 07/2005: Sales engineer/geologist for a wireline service company. I made sales calls to various oil field operators in Oklahoma for open hole logging services. Duties included helping rig up/down and monitoring open hole logging operations in Oklahoma and Texas that included dual induction, gamma/gamma, density and porosity logs. Evaluated open hole logs for Sw and created a spreadsheet capable of determining Rw from SP where catalog values for Rw were questionable and/or non-existant.

02 to 07/2004: Technical director for an industrial/oil field chemical plant. I helped develop new chemicals for oil and gas well stimulation, CO2 and H2S gas removal at the wellhead, and iron chelating compounds. Devised a spreadsheet for chemical blends based on weight rather than volume that significantly improved the accuracy of large volume blends in the plant. Negotiated a contract for an uninterrupted supply of raw material crucial to a product that ensured the company's ability to meet increasing demand for that product. Recommended physical improvements and implemented standard safety procedures and that made the plant a safer, healthier place to work.

08/2003 to 02/2004: Mud logger on oil & gas exploration drilling rigs in Oklahoma (Anadarko Basin) and Texas (Permian & Ft. Worth Basins). Duties included those typically required of mud loggers that is; helped rig up/down and maintain equipment; collect, prepare, test and describe drilled cutting samples; monitor and document gas shows; prepare and present mud logs in a daily report to operator/company representatives.

02/2002 – 04/2003: Estimator/geologist for a foundation drilling company; I used geotechnical data to produce 3-dimensional images of the subsurface that greatly aided in estimating the cost of drilling large diameter piers for commercial construction projects in Oklahoma City and the Dallas/Ft. Worth area. I also designed spreadsheet models for estimating drilling jobs that greatly reduced the time and improved the accuracy of the estimates.

09/2001 to 02/2002: Structural geologic mapping and prospect development: I used drill hole data (mud logs & geophysical logs) to create structural contour and isopach maps using statistical/scientific software that rendered colored maps in 3-D for an independent oil and gas exploration company on leases in south-central Oklahoma that showed areas where drilling would likely be most successful. Water well rehabilitation projects using chemical and mechanical methods on large capacity irrigation wells for Braum's Dairy Farm and municipal water wells for the City of Enid. I designed an innovative chemical treatment based on chemical analyses of ground water that increases the specific capacity of water wells while destroying bacteria and neutralizing pH from prior acid treatment. Performed surface geophysical surveys in ground water exploration using electrical resistivity and SP methods for the Town of Ravia.

01/2000 to 08/2001: Sales Engineer/Project Manager, Layne-Western Company, 1011W. Harry St., Wichita, KS 67213. Duties included marketing and managing projects for a variety of water well services including water well drilling, water well rehabilitation, water treatment systems, pump repair and replacement, environmental and geotechnical drilling and sampling, and ground water exploration geophysical surveys. Experienced in job cost estimation for all of the above and in managing projects from beginning to end. Within the first 6 months as a sales engineer, I developed a single water well rehabilitation job for a small town in western Oklahoma into a $75,000 project that significantly improved the production of an entire well field and followed that by initiating plans for a proposed $1.3 million dollar nitrate removal system by Layne for that city.

09/1998 to 01/2000: Lovell, WY and Minco, OK. Contract work as a geotechnical engineer on the Greybull River Valley Irrigation Project near Cody, WY. I performed grade control surveys, identified soils, and calculated cut/fill volumes for the excavation of a five mile long irrigation canal. Relocated to Oklahoma and worked as an AutoCAD drafter for a surveyor.

05/1995 to 07/1998: Mine Engineer, Bentonite Corporation, Lovell, WY. I was responsible for mining operations at the Lovell plant from June 1995 to June 1998. Duties included supervising development drilling projects, designing and surveying new pits and volume calculations for completed pits, ore reserves calculations, and mine reclamation surveys. I worked with the plant manager, quality control/lab manager, and stripping/hauling contractor in coordinating mining activities to meet increasing production demands. The plant quadrupled production from 1995 to 1997 - setting an industry record.

1985-1995: Employment while attending South Dakota School of Mines & Technology:
Returned to South Dakota from Oklahoma in 1984, and attended college at South Dakota School of Mines and Technology. The following positions were held during the summer months and part-time while I attended college: Field geologist for Western Mining Corp. (USA), an Australian gold mining company in a joint gold exploration venture with Homestake Mining Company in the Black Hills of South Dakota. Fluid inclusion research on gold bearing quartz veins for Homestake Mining Company using a USGS heating and cooling stage mounted on a petrographic microscope. Geotechnical engineer for a civil engineering firm in Rapid City, SD. Field geologist at the Richmond Hill Gold Mine, a heap leach surface gold mine in the northern Black Hills. Duties included logging cuttings from reverse circulation drilling rigs, geologic mapping and cross sections.

1975-1985: Employment in the construction industry in Rapid City, SD and in the oil fields of Wyoming. Returned to Rapid City, SD upon discharge from active duty in the US Navy and worked as a concrete laborer and form setter for several years. In 1977, I earned a 2 year associates degree in Building Design and Construction from Western Dakota Technical Institute in Sturgis, SD and worked as an architectural draftsman at a lumber yard prior to migrating from South Dakota to Wyoming during the oil boom. In the early 1980's, I was employed as a rig hand for a wire line (oil well logging and perforation) company in Casper Wyoming, and later, as a field representative (landman) specializing in federal leases for Davis Oil Company in the Powder River Basin. Drilling activity declined in Wyoming before it did in Oklahoma and I moved to Oklahoma City where I found seasonal work as a construction laborer followed by temporary employment as a geologic map drafter and technical illustrator prior to relocating back to South Dakota.

1970-1975: Drafted during the Vietnam War, enlisted in the US Navy, trained in basic electricity and electronics as a Firecontrol Technician, served onboard the aircraft carrier USS Independence, volunteered for and served with the Navy's Special Forces (UDT/Seal Team - 21). Honorably discharged.

EDUCATION
1991 BS degree in Geology, South Dakota School of Mines & Tech., Rapid City, SD
1995 MS degree in Geology, South Dakota School of Mines & Tech., Rapid City, SD

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 2856)

Go to Search Parameters...

Brief Description

Site Safety

I have been doing civil drafting for an enigneering firm that does contracts for Texas Department of Highways and National Texas Toll Authority for a year now. I also work for the land development department and the surveyors. I have one year microstation experience in a job setting.

Configuration of Routing Protocols like RIP, IGRP, EIGRP, OSPF, BGP in Cisco routers.

As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

Eight - year experience in Civil Engineering Projects.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

Controls Engineer with work experience ranging from coal and gas power plants (4.5 years) to oil refineries (1.5 years).

Master degree, Structural, Civil, Staad Pro, SAP, STRAP, Strucad, Autocad, leadership, project management

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)

Have working experience in 6 countries; around 15 years of experience in Project Management, Project Engineering, Engineering Design, R&D, Construction, Technology Management and Business Development. Have extensive experience in subsea/offshore pipeline, cross-

Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

Instrument Supervisor

Junior project manager

Qatar Petroleum

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

Mechanical Superintendent

Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

Electrical Engineering with knowledge in ultra-wideband amplifier, power system, MOSFET, BJT, 3-phase circuits, and electric drives

Experience work in Overseas

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Installation, loop checking, calibration and commissioning

Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Project Engineer (Instrumentation & Control)

German graduate Structural and Optimization Engineer with 5 years experience in the German industry with a practical experience and familiarity with modeling&optimization softwares(like CASERII,ANSYS,ABAQUS,iSIGHT)

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out