Resume - My objective is to acquire my Associates degree in Engineering Designing Graphic...

Misco Jobs

Resume #68413

CONTACT INFORMATION:
View contact information...

Objective:

My objective is to acquire my Associates degree in Engineering Designing Graphics, learn marketable skills, and to utilize these skills in this field. These skills would include designing new homes and reconstructing commercial buildings.

Work experience

12/07-present Houston, Texas
Plumbers local union 68
Apprentice Plumber

Drafting with autocad drawing pipe fittings and doing touch up on building layouts.
Assist Journeymen's with plumbing projects
Transcribe blueprints
Ground Grading
Operating Machinery
Calculate Measurements
Soldiering

5/2007-12/07 Houston, Texas
Triumph healthcare
Maintenance Mechanic

Plumbing
Electrical Repair
Computer Repair

07/04-05/07 Houston, Texas
Center Point Energy
Meter Reader

Reading Meters
Company Driver Relief
Requirement: Maintain 99.1% or above accuracy reading meters

07/02-04/04 Houston, Texas
Plumbers local union 68
Apprentice Plumber

Drafting with autocad drawing pipe fittings and doing touch up on building layouts.
Assist Journeymen's with plumbing projects
Transcribe blueprints
Ground Grading
Operating Machinery
Calculate Measurements
Soldiering

09/01- 07/02 River Oaks Country Club Houston, Texas

Golf Operator

Collect golf balls from field using Pick Machine
Cleaned and fill baskets with golf balls
Managed Golf Operator Department

06/00- 08/00 Grocery Supply Houston, Texas

Order Selector

Operate Palate Jack
Maintain 87% accurate timing

Education

2005 San Jacinto College
GPA: 4.0
Engineering Designing Graphics

2003-2007 Plumbers Local 68
Plumber's License

2001 Universal Technical School
Auto Mechanic

1996-2000 North Shore Senior High
Diploma
High School Senior Quarterback

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 2815)

Go to Search Parameters...

Brief Description

Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

Instrument Supervisor

Junior project manager

Qatar Petroleum

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

Mechanical Superintendent

Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

Electrical Engineering with knowledge in ultra-wideband amplifier, power system, MOSFET, BJT, 3-phase circuits, and electric drives

Experience work in Overseas

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

Project Planning, Scheduling, Project Control,Project Monitoring, Project Coordination, Progress supervision, Costing, Estimation, Budgeting and Contracts Management for EPC Projects, Heavy Mechanical Fabrication & Erection,Civil,Buildings,Steel Structures,In plant Piping,and Turnaround schedules

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

International Project, Construction, and Contract Management

Installation, loop checking, calibration and commissioning

Behavioral Based Safety, Ergonomics, Human Factors, and Oil and Gas Construciton Safety Professional

SDS2, Xsteel, AutoCAD Steel Detailer.

ITI in Draughtship

Project Engineer (Instrumentation & Control)

German graduate Structural and Optimization Engineer with 5 years experience in the German industry with a practical experience and familiarity with modeling&optimization softwares(like CASERII,ANSYS,ABAQUS,iSIGHT)

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

I understand from your advertisement that there are openings in reputed company for various posts with challenging responsibilities. I have special interests in QA/QC and wish to offer my services as QA/QC Manager/ Supervisor.

Quantity Surveyor For Aluminium Facade Work

Civil / Structure Engineer with expertise in Structure and infrastructures for transportation, industrial / petrochemical and mining projects, also has capability in offshore structure design.

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Skilled technical SalesProfessional with International business Development experience in over 17 countries

My objective is to acquire my Associates degree in Engineering Designing Graphics, learn marketable skills, and to utilize these skills in this field. These skills would include designing new homes and reconstructing commercial buildings.

Being in one of the best Civil Engineering School in France (ESTP School), I believe my two years experience/education in Civil Engineering, coupled with my drive and enthusiasm, would enable me to make a significant contribution to your company.

MS Office, Diploma in Mechanical Engineer

Structural Designer / Draftsman

I hold a Bachelor of Science degree in civil engineering and have over 8 years experience in the design of concrete and steel structures.

3+yrs exp in qa/qc in highway engineering (roadworks)

HYDRAULIC MECHANIC

Quality Assurance/Quality Control COORDINATOR for Oil & Gas Projects (Pipelines, Tanks, In-Plant Piping, Pumps & Compressors Installation)

I am ambitious, hard working, challenge orientated and enjoy problem solving. I am able to work within a group or by myself.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out