Resume - C++,autocad,communication skills,java,adobe photoshop,microsoft office.

Misco Jobs

Resume #69342

CONTACT INFORMATION:
View contact information...

I am a Junior Undergraduate student doing Bachelor of Technology in Civil Engineering at Indian Institute of Technology (IIT) Bombay, one of the premier institutes for Engineering and Applied Sciences in India.I am currently in second year of my 4 year Btech programme and I will be completing my second year in april'08.I am looking for a challenging opportunity for summer internship in the field of

1.structural engineering
2.earthquake engineering
3.environmental engineering
4.fluid mechanics
5.Civil Engineering with Management
6.Finite element analysis
7.Transportation engineering
8.Finite element analysis for the period of May-July 2008.This internship is a mandatory part of our curriculum.I am very keen to pursue the same under your able guidance.

I have gone through the homepage of your Research Group.I would be very fortunate to have an opportunity of working under a distinguished researcher like you. Hence, I request you to consider me for internship under your expert guidance.

I am fully aware of the commitment and perseverance required for an internship and I am confident that I
can contribute significantly to original research in the field with your guidance.To give you a better sense of my qualifications, I am sending my Curriculum Vitae, which follows this letter.I would be glad to send you any other information and would welcome any suggestions you may like to offer.If selected I would try my level best to rise up to your expectations. Looking forward to a positive response from you. I will be highly grateful.

I have attached a. pdf copy of my resume for your reference.The courses, projects and labs done by me may prove to be helpful for you and your project work. Kindly go through it and let me know if i am of any use to you.

*******************************************************************************

Academic Status: currently 2nd yr ( 3rd sem ), Bachelor of
Technology,IIT Bombay

EDUCATIONAL QUALIFICATIONS

YEAR School/University Certificate/Degree CPI / %

2007-08 Indian Institute B.Tech,CIVIL 7.0 on a scale of technology Engineering of 10 till third semester
2005 INDIA INTERNATIONAL 12TH standard
SCHOOL,JAIPUR CBSE, New Delhi 81.1%

2003 INDIA INTERNATIONAL 10TH standard
SCHOOL,JAIPUR CBSE, New Delhi 94.0%

l
SCHOLASTIC ACHIEVEMENTS
* Selected in top 0.6% (rank-1702) of 3,00,000 students in the Joint
Entrance Examination (JEE) for admission to the Indian Institute of
Technology (IIT) conducted all over India.
* Selected among top. 09% (rank-582) of 6,50,000 in All India
Engineering Entrance Examination (AIEEE).

KEY ACADEMIC PROJECTS:

Term Project:

Worked on an autocad project which involved:
Drawing of various details of residential buildings,
Framed buildings in steel and concrete.
Industrial and laboratory buildings.
Principles of planning
Relation of frame work details
Floors and roofing systems,
Masonary,
Load bearing and non-load bearing walls
Working drawings of buildings.
Quantity surveying and estimating.
Specifications and analysis of rates

Computer Programming and Utilization, Prof. Milind sohoni
*Did project in C++ which involved solving a 2-D maze.
hence, enhanced my skills in developing algorithm.

Presently learning a software named abaqus (based on finite element analysis)
which involves solving of a truss or beam with the help of computer making the work of engineers easier.

"Effect of Arabian sea, Indian ocean and Bay of Bengal on the Indian monsoon" which deals with the prediction of monsoon based on the phenomenon occurring in these oceans.
*deals with al-nino and la-nina
*tracks the data from the past for future analysis

Narmada Dam Project (sardar sarovar dam) which involved dealing with
The construction of the dam,
The problems faced,
Resources used
Total time taken to complete the dam
Its utility on the human population in that area.

OTHER PROJECTS:

Water and Waste Water Engineering:- (city presentation)

Estimation of the resources of water in the city of Bangalore
Calculation of the total amount of water required per capita per day based on the total population and the area of the city
Estimating the water needed for the future years to come
Estimation of the drainage and pumping facilities in the city.

Water and Waste Water Engineering:- (hostel presentation)

(a)Surveyed the drainage facilities in my hostel
Surveyed the total number of main outlets in the hostel, the recommended requirements and the available resources.

(b)Made a report on the sanitary facilities available in the hostel.
It included the total no of bathrooms and lavatories in the hostel
Compared it with the recommended values and suggested the required numbers and way to improve the condition.

LABS DONE

The labs were a integral part of the course. Few of them are mentioned below:

Physics Lab I:

Moving Coil Galvanometer;
Fresnel`s Biprism;
Prism Spectrometer
Newton`s Rings
Anderson`s Bridge
Young`s Modulus by Koenig`s Method
Moment of Intertia Of a Flywheel
Therimstor Characteristics
Helmholtz Coils
Compound Pendulum
Chemistry Lab I:
Galvanic cells
Thermochemistry
Chemical kinetics
Equilibrium constant
Analysis by oxidation reduction titration
Solid Mechanics Lab I:
Experiment on axial tension of mild steel and cast iron
Compression on concrete
Bending of beams
Buckling of columns
Experiments on shear centre
Continuous and interconnected beams
Unsymmetrical bending of angle sections
Buckling of columns of various cross-section and end conditions

Fluid Mechanics Lab I:

Ideal fluid motion part a two dimensional circular cylinder by means of an electrical analog
Study of boundary layer growth in a wind tunnel
Drag on a circular cylinder
Minor transition losses in pipes
Determination of friction factor of pipes
Flow measurement by Orifices
Venturimeter and notches
Computations of various coefficients in involving jet flow through orifice
Demonstration experiments
Bernoulli apparatus
Reynolds apparatus
Magnus effect.

Fluid Mechanics Lab II:

Application of Hele-Shaw Model to compute dam seepage.
Deformation of fluid viscosity for Hagen Poiseuille flow conditions.
Electric analog for the pipe solution networks.
Flow net studies around circular cylinder.
Verification of Darcy"s law.
Geodesy Lab I:
Horizontal control-compass
Plane table and theodolite traversing
Plotting traverses and mapping details
Vertical control-spirit levelling
Tacheometry and trigonometric leveling
Curve setting.
Principles of Electrical Engg:
Fundamental laws of electrical engineering.
Circuit parameters. elementary network theory
Forced and transient response,
Sinusoidal steady state response
Three-phase circuits
Magnetic circuit and transformers

RELEVANT CORE COURSES TAKEN / ONGOING

*Civil engineering drawing
*Solid mechanics 1and 2
*Fluid mechanics 1 and 2
*Environmental engineering and science
*Solid mechanics lab 1
*Fluid mechanics lab 1 and 2
*Geodesy and surveying
*Geodesy lab
*Water and waste water engineering
*Electrical Engineering and its applications.

PROFESSIONAL SKILLS

*languages known:C,C++
*worked as a member of the team SARC(student alumni relationship cell)(www.iitbombay.org) which involved making calls to the alumni in foreign countries(mostly U.S.A.) and telling them about the 50th anniversary celebrations of I.I.T. Bombay and to raise funds for the institiute. This gave me a sort of call centre experience.

POSITIONS OF RESPONSIBILITY

*Currently holding the position of hostel sports secretary.
*Worked as Organizer of mood indigo 2006 in the department of horizons,
India's biggest cultural college festival in my first year
*Worked as Coordinator of Mood Indigo 2007(www.moodi.org) in same department and thus dealt with the work of assisting the students from other colleges. Here I learnt a lot of management skills.
*Worked as a coordinator of techfest 2008(www.techfest.org) in the department named 'technoholix' where I handled a night event of 'laser floyd'(from U.S.A.) and thus learnt how to deal with foreigners and also management involved in stage performance.

EXTRA CURRICULAR ACTIVITIES

Technology:
*Participated in nexus-an event of techfest 2007 and built a robot of specified small dimensions that could carry 10 table-tennis balls and also climb stairs each of height 15 cm.
*Participated in techfest 2007and built a 5 points linking bridge from popsicle sticks that can support the weight of 15 kgs.the structure weighted about 1.1 kgs.

Cultural:
*Had actively participated in PAF (performing arts festival) of IIT bombay. Our group won second prize.
*Had also taken part in the hostel play (Bermuda triangle) which won 2nd position in the institute.
*Performed in an institute dance event-gyrations.
*Handled the lights department in four-fest (annual hostel fest)

CERTIFICATES OBTAINED AT THE SCHOOL LEVEL

1. Cleared all India general knowledge test conducted by all India board of general knowledge test, a wing of USO
2. Wisdom 2004 45% scholarship.
3. Got 2nd rank at sub center level in National quiz " Awakening Indians to India"
conducted by all India chinmaya yuva Kendra
4. secured 19th position in Wizkid-2002 conducted by rotract club, jaipur,main.
5. got brilliant student medal in all rajasthan talent scholarship award-2002 conductd by saraswati shiksha sansthan.
6. Wisdom-2001- talent search contest-placed among first 200 contestants
7. got 7th rank in Wizkid 2003 conducted by rotract club jaipur, main
8. participated in all India CEPS talent search examination.
9. participated in stse(state talent search examination)- 2002

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 2819)

Go to Search Parameters...

Brief Description

Over 34 Years of experience in NDE Field.

Freelance civil engineer with dredge / rockworks / seadefense experience

I am BGAS level I Coating/Painting Inspector, I have 6 years of extensive experience in oil and gas industries at onshore and offshore fields for coating of steel structures, vessels, storage tanks, equipments, pipelines, offshore fixed platforms and single buoy mooring

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

As apparent in my resume I have close to 2 years of work experience. The most predominant project I was assigned too was at Motorola. I was working on a New York state-wide two-way radio communication network for emergency personnel.

Mechanical Design Engineer

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

Interested ina senior management position in metallurgical/ materials engineering in South East Asia. I have over 20 years of professional experience in USA and Asia, part of that as a senior manager. Willing to relocate and open to reasonable salary offer.

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

All discipline Draughtsman w/ Architectural, Structural, and Electrical & Mech. experienced and more than five years in Design & Construction Environment both local & abroad.

I am BE (Mechanical). I am working as Assitant Planning Enginner In PECL at LNG Project Of Shell Gas Pvt. Ltd. at Surat

looking for a job

Looking for work as a civil engineer

CONSTRUCTION PROFESSIONAL with 2 years of experience in the industry

Strong computer skills utilizing CAD, GPS & data collection systems. Analysis of survey data and its use combined with aerial photogrammetric surveys. Quality control of digital mapping. Layouts for construction works. Management of multiple survey crews.

Civil Engineer seeking position in the oil Business or Construction

cable management, electrical construction supervision, electrical assistance

Please refer. my Resume below

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Construction/Mechanical Project Manager and Engineer with over 15 years of experience including recent projects in the construction industry.

Nineteen years of experience (Five year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Autocad, Primavera Planner, Excel, photoshop My special skills.

OFFSHORE C & I

Civil engineer (having good skill in building design and drafting using autocad application, surveying and plotting and drafting survey map using auto cad land development, structure design, have good knowledge in GIS and HEC-RAS, etc)

acad, cad technician, drafter

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

To offer a background 0f 15 years experience in EPC & Commissioning including 4 years in construction management and 4 years in project engineering & 7 years in field of construction projects with proven strength in inspiring the confidence and trust of Owners & others of Petrochemicals projects/ref

12 years of experience in project management, site supervision, shop supervision, estimation & costing, tendering, inspection, testing and commissioning of cross country pipeline and heavy fabrication

Structural Ananlysis & Design, ETABS, STAAD PRO, AUTOCAD, ANSYS, SAFE

Pipeline construction Engineer with knowledge in Piping Design

5 years of experience in Designing/Detailing of Open Web Joist with the use of in-house CANAMMANAC Company software which are DESGO 3 and DESGO 4. Open Web Joists are framed either by PEB, Structural Buildings and/or Concrete Buildings.

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

15 years of broad based management experience in diverse development projects. Experienced in planning, execution, monitoring, training, consultative, information dissemination, research analytical and evaluative services in project implementation. Recognized as a gutsy, hardworking and dependable t

Techenical /Project Engineer

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.

Project management,QA/QC,Construction,Maintenance

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

Civil Engineer- Labd development planning and Civil design, CAD drafting, computer skills

As a third year Mechanical Engineering student at the University of Dayton, I am currently studying courses in Heat Transfer, Mechatronics, and Strength of Materials. As demonstrated by my strong GPA, I am a hard working and reliable individual.

C++,autocad,communication skills,java,adobe photoshop,microsoft office.

Balestier ITE, class of 2005 (NTC 2, Building Drafting), AMK ITE, 2002-2003 (NTC 3, Precision Engineering) Zhonghua Sec, class of 2001 (GCE 'N' level). Have skills in drawing, building life-sized models, knack for assembling home fixtures and electrical equipments, wirings, repairing electric tools.

Graduate/Mechanical Engineer-Working in Project Engg., & Management for Oil, Gas & Petrochemical

Civil/Structural/Mining Engineer (taking Structural Masters) with 6 years experience in a civil and mining environment as well as technical sales experience. Completed BSc in Mining Engineering and ongoing schooling in Masters in Mechanical Engineering (MCE). Willing to relocate.

i have 17 years experence in the field of instrumatation covering industries like refinrey petro chemical and power plant

12 years in surveying

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out