Resume - QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electri...

Misco Jobs

Resume #69632

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all schematics and effectively isolate and troubleshoot components and circuits in both AC and DC systems.
I have experience with LSI job packets and QAQC inspection process through training with QAQC.

AREAS OF PERTISE:
-Digital meters -Schematics -Fork lifts -Hydraulics

-Troubleshooting -AC/DC Motors -Tractors -Mobile Facilities

-Gasoline Engines -Cranes -Two Stroke Engines

-Diesel engines -Cryogenics

And extensive knowledge on the following test equipment:
-Oscilloscopes -Power Meters -Load bank
-Frequency Co -Cylinder pressure gauge -Timing gun
-Multi-meters -AC/DC Voltage Standards -Power Supplies -Resistance Standards

JUN 1999 April 2006Quality Control Inspector U.S.N
Duties: Inspection, Quality Control, and Safety of eight separate work centers. Monitored the Safety, hydraulic testing, Cryogenic storage and training programs to insure program integrity was being met.
1 Performing material acceptance inspection, entering system database, assigning it to a work center, and issuing priority to all aircraft sub-systems that are sent to logistics squadron for repair.
2 Approving, issuing priority, and tracking through requisition numbers, all parts needed for aircraft sub-system repair.
3 Collecting, screening, and ordering approximately 5,000 dollars of maintenance support supplies making a safer more productive environment.

JUL 1996 - APR 2007 GENERATOR MECHANIC U.S.N

Duties: Inspecting, testing, maintaining, and repair of diesel, gasoline engines, hydraulic components, assemblies, sub assemblies, modules, cards, printed circuit boards, and ancillary equipment whose aggregate constitutes a complete mechanical system or subsystem.
1 Repair and maintenance on all generators from 2k to 635k both electrical and mechanical.
2 Break down and repair of all aspects of diesel and gasoline engines from regular maintenance to the complete repair or replacement or major or minor parts including engine swaps.
3 Applies the theory of impedance, resistance, capacitance, and inductance to Support Equipment Starter and Test systems.
4 Uses electronic schematics, block diagrams, wiring diagrams, color codes, and other technical publications.
5 Uses technical and supply publications to obtain accurate data for supply purposes.
6 Isolates and diagnoses Power Plant systems and subsystems for errors and failures in the operation to quickly and efficiently correct the problem.
7 Performs the necessary corrective action prescribed in applicable maintenance instructions for corroded and deteriorated mechanical and Electronic components.
9 Master trouble shooter in all aspects of my rating including: Hydraulic systems, cryogenic systems, mobile maintenance facilities, turbines, and gas and diesel engines.

JUNE 2001-JAN 2007 Work Center Supervisor; U.S.N.
1 Effectively run the day to day operation of my work center in the completion of daily tasks in support of the current Navy mission objectives.
2 Supervised the installation and maintenance of A/C and D/C industrial motors, control panels, conduit.
3 Operated and Licensed on all equipment in my job field: 20ton and 6ton fork lifts, mobile electric power +/plants, hydraulic power plants, crash cranes, fire trucks, and tractors.

MAY 2007- CURRENT GENERATOR MECHANIC (LSI)
Duties: Inspecting, testing, maintaining, and repair of diesel, gasoline engines, assemblies, sub assemblies, modules, cards, printed circuit boards, and ancillary equipment whose aggregate constitutes a complete mechanical system or subsystem.
1 Repair and maintenance on all generators from 2k to 1000k both electrical and mechanical.
2 Break down and repair of all aspects of diesel and gasoline engines from regular maintenance to the complete repair or replacement or major or minor parts including engine swaps.
3 Applies the theory of impedance, resistance, capacitance, and inductance to Support Equipment Starter and Test systems.
4 Uses electronic schematics, block diagrams, wiring diagrams, color codes, and other technical publications.
5 Uses technical and supply publications to obtain accurate data for supply purposes.
6 Isolates and diagnoses Power Plant systems and subsystems for errors and failures in the operation to quickly and efficiently correct the problem.
7 Performs the necessary corrective action prescribed in applicable maintenance instructions for corroded and deteriorated mechanical and Electronic components.
8 Complete all packet paperwork before and after job is complete to get equipment back in the customers hands within an acceptable time frame.

APRIL 2005 - APR 2007: General Manager; Domino's Pizza
1 Controlled sales food and labor of a 20,000 a week store.
2 Hired and trained Quality team members with one of the lowest turn around on employees on the east coast.

SUMMARY OF WORK HISTORY
JUNE 1996- APR 2007, U.S.N. Aviation Support Technician
APR 2005- Current, Domino's Pizza/ General Manager

SPECIAL LICENSING AND CERTIFICATIONS
10-June-2001 EPA Universal certification for purchase and maintenance of refrigerant: USN Certificate of training
21-Nov-1997 Maintenance, isolation, and diagnoses of Mobile Power Plants: USN Certificate of training
06-SEP-2000 Individual component trouble shooting and repair: USN Certificate of training
04-Feb-2002 Diesel, gasoline engine repair for ground support equipment: USN Certificate of training.
12-JAN-2000 Microsoft word and excel certificates. USN Certificate of training

EDUCATION
1996- High school diploma
1998- 24 credit hours from Texas A & M
2000- 18 credit hours from University of Oklahoma
2006- 22 credit hours from Colorado state university

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 2856)

Go to Search Parameters...

Brief Description

DCS APPLICATION ENGINEER WITH 4 YEARS EXPERIENCE

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all s

Architect and Interior Designer

Over six years of extensive experience in Planning of a large Infrastructure & Commercial Development Project

HVAC Engineer,Project Engineer,Mechanical Engineer,Commissioning

BE (Electrical) with 7 Years Experience in the Field of Purchase, Contracts, Planning & Cost Control, Budget, Cash Flow, Project Reports & General Management

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Area of expertise is ranging from Preliminary and Details Design, Construction

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

Five years experiance in this civil engineering .

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

Planning Engineer/ cost controller using Primavera P3 Construction Experience as Project engineer

Project, Construction Management, Contract Administration, Supervision & Site Control, Quantity Surveying (QS), Cost Estimation, Site/store co-ordination & Control, Project Planning, monitoring & review of progress, Site Survey & estimation of quantities.

Seeking a continually challenging career in Civil Design

i have more than 6 years experience in geotechnical engineer

pipeline engineer / process engineer

having experience in oil, gas refinery and petrochemical as insulation and painting engineer

OBJECTIVE: A position as Mechanical Engineer (Basic/Principle Design, Estimation, Tendering & Procurement)

Exposure the actual horizontal and vertical constructions and marine construction such as roads, drainage and sewerage systems, buildings, foundations, elevated structures for the equipment, breakwater, Jetty, and shore protection.

Concrete batching plant supervisor, wh can handle batching plant... etc. know to design concrete very well.

Construction & oil and gas & auditing

Results-driven Civil Construction Management Professional with extensive senior-level experience in the Supervision, Quality management, planning & programming, design and successful completion of large-scale civil and structural engineering projects worldwide.

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Experienced in construction / pre- commissioning/ commissioning capacity both onshore and offshore since 2003 and been involved in a number of various major projects within a wide range of the engineering industry. I regard myself as a hardworking reliable person who is capable of working under pres

I have been involved in the Construction Industry for the past Six Years in the Field of Highways Construction as a Quality Control Engineer. During this period I have worked with various contractors on highways projects and at presently working with consultant involved in Dubai Metro Project. I am

Project Management

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing electro-mechanical projects and operations & maintenance of real estate properties.

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Distribution substations installation & commissioning,operations & maintenance of all substation equipments

Electrical, Instrumentation and Control Disciplines

Being in the field of engineering for more than 5 years, experienced in various jobs like HVAC systems, MEP, Air pollution Control Systems, Water Treatment Plants Fabrication & erection

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

i'm chemical engineer working presently with TOYO ENGG. INDIA LTD. attached pls. find my resume.

Planning engineer

Well versed in Autocad, 3D StudioMax, Photoshop and freehand drawing.

I am Quality Control Engineer with Seventeen years experience in Oil&Gas and Power sectors.

piping engineer , pipeline engineer , mechanical engineer, construction manager

Planning Engineer with more than 5 years local and international experience in the field of mechanical / planner engineering from construction of Industrial, Building and Domestic Residential onshore project acquired extensively with past position handled on the above qualification.

Has an extensive experience of 4 years & 10 months in this trade of discipline from design to implementation of projects both Civil and MEP Works, wide scope of planning, quantity surveying, estimating, cost engineering, cost controlling and project management skills.

Experience CNC Maintenance engineer including installation and troubleshooting. Familiar with Fanuc and Mitsubishi CNC control

A motivated, dedicated and technical expert in mechnical and electrical system

I am lead field engineer in Jubail 2 project, AVS with good managerial skills

Drafter

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out