Resume - 15 years experience in Mechanical Construction, Commissioning and Maintenance wo...

Misco Jobs

Resume #70327

CONTACT INFORMATION:
View contact information...

Background consists of DEPLOMA in Mechanical Associate Engineer along with FSc from Multan board.

15 years experience in Mechanical Construction, Commissioning and Maintenance work with Multi National Companies, in Country and Abroad.

Experience in LNG Plants, Desalination Plants, Power Plants, Chemical Plants and in Oil refineries.

World Wide Recognized companies I worked with.

JGC CARPORATION (Japan )
MARUBINI CORPORATION (Japan)
BLACK & VEACH (USA)
GE Interventional Inc. (USA)
SIEMENS (German)
NOELL (German)
DESCON (Pakistan)

CURRENT JOB ASSIGNMENT:

Working with GEII ( USA ) as Mechanical Supervisor at his CCPP near Ras Abu Fontas Al-Wakra ¡VQatar. Plant consist of 3 frame 9F GE gas-turbines along with consortium partner ( FISA ) combine cycle boiler ( HRSG ) and desalination plant since November 2007.

RESPONSIBILITIES:

* Inspection of piping and structure work.
* Piping works from fabrication up to erection.
* Start Up and commissioning of piping systems.
* Daily walk down for Data collecting and routine surveillances.
* Modification/Repair work of the Plant.
* Punch list and as built drawing preparation along with turnover packages.
* All kind of inspection record keeping.

ACCOMPLISHMENTS:

„« All piping inspections from pipe fabrication up to erection and commissioning.
„« Resolving day-to-day issues with consultant by convincing them on technical grounds.
„« Provide technical assistance to perform modification, replacement and repair piping works according to specification and vendor requirements.
„« Handled very demanding customer concerning Operational and Maintenance issues with a very limited team.

Inspection Strength:

* Erection of LNG plant, Power plants and Chemical plants.
* Commissioning and maintenance of all BOP (Balance of Plant) Systems.
* Construction of Pipe, Structure and Supports work.
* Installation & maintenance of all type of Equipment's.
* Worked on Water treatment plant.
* Modification Works.
* Flushing, Pigging, Commissioning, As Built Drawings preparation.
* Painting, Color Coding, Labeling Work.
* All type of Material & tools Knowledge.
* Documentation works and Computer Skills.

* I am young having good health, knowledge and courage to achieve any difficult target.

Previous assignments with different Organizations.

„« Worked with JGC at his largest gas purification plant ( LNG ) erection in DOHA ( Qatar ) with the capacity of PIPING SUPERVISOR since July 2005 to October 2007.

„« Worked as Piping Superintendent at Pak Arab Fertilizer Plant expansion project in Multan from August 2003 to May 2005.

„« Worked with GE International Operation at UCH Power project Dera Murad Jamali from Sep 2001 to Apr 2003 as a Piping Supervisor.

„« Worked with Descon Engineering (UAE) at Ruwais Petrochemical Project (#1076) as a Piping Supervisor from Aug 2000 to Jul 2001.

„« Worked with Marubeni Corporation at PARCO Oil refinery at Qasba Gugrat as Piping Supervisor from Sep 99 to May 2000.

„« Worked with Black & Vetch International (BVI) Company (An American Firm responsible for Balance of Plant) at 412 MW Rousch Combined Cycle Power plan Project at Abdul Hakim District Khanewal as "Piping Inspector Coordinator" from August 97 to July 99.

„« Worked with Pakistan Atomic Energy Commission at there Atomic Project as Piping Supervisor from June 97 to August 97.

„« Worked with SIEMENS ¡VAG (Prime Contractor) at 415 MW combine Cycle Power Plant Project at Guddu (WAPDA) from Oct 94 to May 96 as "Commission & Maintenance Foreman".

„« Worked with SIEMENS-BOP (NOELL) at 415 MW combine Cycle Power Plant at Guddu (WAPDA) from June 93 to Sep 94 as "Mechanical Lead Man".

„« Worked with DESCON Engineer Company. At various projects and in Shut downs in Pakistan and abroad in different times.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 2819)

Go to Search Parameters...

Brief Description

Structural designer and progect engineer experienced in designing , supervising and progect management on large residental and industrial projects in Libya and Bulgaria,elegible to be member of Professional Engineers Association of Ontario, Exelent skill in desigh and inspection of steel and RCS

I have more than 15 years experience in safety and environmental policy implementation for construction sites , drilling , workovers and explorations, refineries, pipelines, shipyard and offshore/onshore oilfields installations.I worked with clients Bechtel, Technip, Chiyoda, Brown and Root, Flour D

I'm a civil engineer andhad worked in different countries. I've been in this field for about 20 years.

Thorough knowledge of all aspects involving residential,commercial and Industrial HVAC and Electrical systems. Extensive sxperience working and leading project teams worldwide in challenging technical environments and different cultures. Understanding and ability to work with other disciplines.

13 years of Land Surveying with 9 years in a Party Chief Position and 8 years experience with GPS

heighted , office oriented, global person

I am a bachelor of engineering degree holder, with vast experience in oil and gas construction projects, i have experience in crane and equipment inspection, plant maintenance and supervision, quality control welding and fabrication and piping process. I am fluent in english .

10 years of total experience in engineering geology & rock engineering in site investigations, slope stability, foundations and risk assessment of structures of Civil Infrastructure projects like Tunnels, power station, underground Chambers, Dams, bridges, road cuttings.

Party chief, heavy construction

14 years experinced senior electrical estimator

NOC/ Installation/ O & M/ Technician/ Engineer

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

chartered civil engineer with 20+ years experience in project management and execution including oil/gas plants

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.

Engineering/Management professional offering expertise in domestic and international construction management and engineering support. Demonstrated proficiency in managing schedules, budgets and personnel for multiple projects with an emphasis on profitability in a variety of environments.

Licensed Civil Engineer with BS degree in Civil Engineering; over 20 years experience in Land Surveying and Civil Engineering in government projects (irrigation, dam, reservoir, roads), construction and surveying firms in the Philippines and abroad.

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

I have over 35 year's experience in the Cement Industry, Machinery Manufacture, Refractory Technology, Large Projects Execution and Commissioning,

Over 25 years of experience of which have more than 15 years of experience in Developed Countries.

ELECTRICAL-MECHANICAL TECHNICIAN CONSTRUCTION – INDUSTRIAL & MANUFACTURING OPERATION & MAINTENANCE – COMMISSIONING – CONTROLS – LO-MED-HI VOLTAGE ELECTRICAL INSTALLATION & MAINTENANCE – HVACR – WATER AND WASTEWATER TREATMENT PLANT.

12 years in wireless industry with experience in various fields of telecommunication such as transmission network planning and engineering, installation, commissioning, integration and optimization

Seeking a challenging position as a mechanical engineer in a well established company that provides an opportunity for career advancement

Survey and layout subdivision lots for rural and urban development and established and marked legal boundaries of properties using different kinds of surveying instruments.

Fire Protection design with construction experience in installation of fixed fire protection systems. Possess in-depth expertise in the bid criteria, layout, hydraulic design, estimating, sales, contracting, installation, repair, inspection and testing.

Sub : Application for the post of Project Manager

My experiences in the field of mechanical mostly covered construction/maintenance of power plants and oil/gas/petrochemical plants. Pls. see attachments.

I have done bsc in civil engineering and have an experience of 20 years in it.

Extensive experience in the civil engineering construction industry ,Feasibility and Pre construction Survey , Construction of buildings ,Dikes, roads, railways, Power Plants, Oil and Gas processing Plants on local and Overseas projects with renown multinational companies in the industry as Engineer

I am a Civil Engineer with more than twelve years experience. I can perform structural analysis and design by manual and computer methods.

Contract Management / Quantity Surveying

My most importance skills are: Trusting in God, Loyal, Self-confident, Adaptive, Honest, Conscientious, Persevering, Dependable, and Efficient.

An Electrical Engineer with 13 years of Progressive Experience in Maintenance and Plant Operations

I have 15 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5.

Work as Senior Civil engineer in all aspect but mostly in Quality control and Materials control

I am a self employed, highly motivated and innovative Engineer. I have much experience in the management of projects for the construction of Rail Equipment plants, Aircraft Facilities, Paper and Steel Mills.

*Twenty-seven (27) years of experience, have been working in MIDDLE EAST, EUROPE and in Far East Asia. Highly professional with strong communication and leadership skills. Well organized with flexibility and common sense. Computer literate in WIN 95/98,Office 2000,MS XP and Internet task.

Structural Design Engineer

Quality control or administration on about steel structure and pressure vessels.

Senior Cost and Planner Engineer

Experinced quality control in shipbuilding,

MTech structures having 9 yrs of exp in structural designs. knowledge in staad ,etabs,cad

15 years experience in Mechanical Construction, Commissioning and Maintenance work with Multi National Companies, in Country and Abroad.

Computer programming knowledge in BASIC, COBOL, C+, DBASE, LOTUS.

Master of Business Administration(Marketing),Master of engineering (Project engineering),Bachelor of Mechanical Engineering. Experienced in project design and engineering (engineering manager for EPC execution) for Balance of plants,material handling,offsites in power plant,steel plant,oil & petro

Expecting a challenging and dynamic career in Civil/Quality Control and Quality Assurance where I can apply my knowledge and development skills.

Experienced Certified Engineering Geologist. Perceptive, creative problem solver. Computer literate. Effective communicator. Undaunted by remote operations. US and Australia resident.

A licensed Civil Engineer, organized individual, goal oriented, committed to responsibilities, affable person, self motivated, determined and a God fearing person.

Bitumen Technology (Hot Mix and Cold Mix), Analysis and Design

Construction

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out