Resume - Instrument engineer with around 15 yrs of versatile experience in the field of ...

Misco Jobs

Resume #70505

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Seeking a challenging instrumentation position in a reputed organization with excellent career growth
Opportunity and scope to contribute for organization development.

CAREER SUMMARY:
More than 14 years of experience in installation and commissioning, calibration, operation & maintenance of pneumatic & digital instrumentation for Gas Turbine power plant, Hvac system and Building automation & control systems ( BACS), Paper mill and sugar plant.

EDUCATIONAL QUALIFICATION:

Degree in Bachelor of Engineering ( B.E ) in Instrumentation Technology from Mysore University. Karnataka State. India. Graduated in August 1992 and was placed in first division.

SOFTWARE EXPOSURE:

Asset management Software under the Microsoft Windows XP & Citrix metaframe Environment such as Maximo ver 5.2, Cognos impromptu Ver 7, Brio report Builder and JD Edwards System.

DETAILS OF WORK EXPERIENCE:
1. JUL-2006 TO TILL TO DATE: BEMCO CONTRACTING CO, RIYADH. KSA
DESIGNATION: SR. LEAD I & C ENGINEER
Projects handled: PP9 – C,D,E & F block (2400 MW ) & PP7 ( 200MW ) Power plants
Working experience:
* Supervision of calibration of all instruments for GE gas turbines, bop &
Crude oil tank farm ( 8 x 50,000 cub mt )
* Supervision of fire alarm system for GT and Bop area
* Installation & commissioning of paging system ( gaitronics system )
* Installation of RTU 560 ( abb ) for scada system for 132 KV substation
* Commissioning of Gas density meters for super grid transformers & GIBs.
* Commissioning of water bath heaters (IFS) & pressure reducing skid (EIV )
for 580MW E- block, installation of heat tracing element for gas electric heaters.
* Commissioning of gas flow metering skid, PRS skid
* Clearance of punch list items including work on ESD & EIV system.
* Loop checking of all digital & analog I/O for ABB infi-90 DCS system.
* Field Wiring & loop checking of GE fanuc PLC & Siemens TXP.

2. MARCH 1996 TO SEPT 2005: SAUDI BINLADEN GROUP ( O & M ), MADINAH, KSA
DESIGNATION: I & C ENGINEER
PME-CENTRAL PLANT is world's largest air cooled air conditioning plant with a total cooling capacity of 20,400 tons and 20 MW power plant. My responsibilities covers the instrumentation of the following assets,
* OM 3400 turbomaster centrifugal chillers & Reciprocating chillers with micrologic control board ( York USA ).
* Building automation & control system (BACS) by landis & gyr ( switzerland )
* INGERSOLL RAND, USA air compressors.
* 20MW,13.8 kV Ruston diesel power GENERATORS plant with PLC control (SIEMENS step 5 ) and accessories under ABB Co., Germany.
* 7 km Chilled water pipeline system which include electromechanical equipments are leak detection system (heganuk) motorized valves, pressure,temp & leak sensors, supply, exhaust & dust fans, sump pumps, pH meters and tunnel telephone system.
* Fire alarm system by NOTIFIER,USA. & fire protection system by KIDDIE FENWAL. USA.
* Telecom EPBAX system by MERIDIAN NORTON TELECOM Co,.
* Water treatment plant ( reverse osmosis )

Duties and Responsibilities:
* Supervising the Calibration of pressure transmitters ( fischer), step controllers (Honeywell), 3300 series vibration and temp monitors ( Bentley Nevada), temperature indicating controllers(ABB Kent), differential pressure flow transmitters( fischer-rosemount), control valves(Fischer), pressure gauges(ashcroft, wika), temp gauges, digital Indicators(visipak), pressure controllers, pressure, flow & temp switches, temp transmitters(rosemount) etc,,
* Checking and troubleshooting of PLC, micro logic circuitry board cards, temp cards and Landis &gyr electronic device in data gathering panels (DGP's), loops and rings for BACS.
* Plans and establishes preventive and major overhaul maintenance schedules and resources for all instrument/control systems in assigned field. Includes establishing maintenance frequency, establishing and standardizing materials, spares, equipment and tools required for cost effective maintenance work, initiating procurement of supplies and ensuring availability of economic stock level, directing and participating in compilation of equipment maintenance data for review and analysis.
* Raises /reviews plant modifications and liases with department personal for timely implementation Prepare and review the scope of work for all instrument/control work. Assess suitability of new equipment/technology and witness their trials.
* Liases with planning personal on timely updating of related equipment, job plans, maintenance frequency in the maximo system. Ensure all activities are carried out in a safe, timely efficient and cost effective manner to maximize plant availability to meet assigned task
* Co-ordinating with all depts. for their section work of routine maintenance and corrective & emergency shutdown maintenance. Preparing reports on weekly and monthly basis about the status of work carried out on the equipments.
* As a quality anchor of the project I am responsible for maintaining the updated as built drawing of every section, maintaining calibration records and other Quality procedures documentation and verification/audit, adhering to the ISO 9001/2000 standards approved by ISO 9001 management representation.

3. MARCH 1992 to JAN - 1996: MYSORE PAPER & SUGAR MILLS LTD.INDIA.
DESIGNATION: ASST INSTRUMENTATION ENGINEER.
MYSORE PAPER MILLS is India's first largest single location integrated plant manufacturing 100000 metric tons a year of newsprint paper & 5000 tcd of sugar and cultural variety of paper. The integrated plant consists of the following:
* Two steam generators of 12.5 MW each capacity.
* BABCOCK & WILCOX soda recovery BOILER of 33 tons/hr steam capacity.
* Coal fire boilers of 60tons/hr steam capacity.
* Pith boiler of 33 tons/hr steam capacity.
* Causticer plant for bleaching and cooking of chips ( raw material for paper).
* Demineralization plant of 80 cubic mtr/hr of dimeneralised water capacity.
DUTIES & RESPONSIBILITIES:

* Supervise instrument calibration for onsite and shop calibration and loop check activities
* Co-ordinate between the instrumentation dept and sub contractor for designing and installation of devices as per the PI drawing.
* supervise periodical inspection and to carry out calibration of sensors, transmitters, recorders, control valve, gauges for pressure, temp, flow and level parameters at the field and Workshop as per requirement.
* To plan and prepare the report for material request, manpower planning & All site activities concerned and report to higher management.

PROFESSIONAL TRAINING:
Attended training courses on Control circuits, Control and Automation system, Relay testing and Calibration, Vibration analysis, Safety in Electronics system, HVAC Chillers, Telephone system, Technical support services (Maintenance management system). Supervisory development course (Roles & responsibilities of Supervisor),Management development (Effective meeting skills ) and Introduction to quality management (Quality anchor) arranged by Saudi Binladin Group ( O& M ), at Head office, Jeddah and in Madinah. Saudi Arabia.
Attended a training course on Computerized Maximo Maintenance System, Covering the subject Working with Maximo,Inventory and Planning work arranged by CMMS dept at Jeddah head office & Madinah area office. KSA.

PERSONAL DATA
DATE OF BIRTH: 16-11-1969
NATIONALITY: Indian
MARITAL STATUS: Married with Two children
LANGUAGES KNOWN: English, Arabic, Urdu, Hindi, Kannada, Tamil.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2793)

Go to Search Parameters...

Brief Description

More than 25 years experience in electrical field.

Civil & Structural & QAQC Construction Superintendent

Hands on experience in planning, erection, commissioning and trouble shooting of Cement Plant Machinery. Additional experience in Refractories for kiln and Steel Casting parts for Cement Plants. Diploma In Mechanical Engineering (4 years - Industry Integerated from Larsen & Toubro Institute)

Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries

Civil engineer

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

Phisicyst with Power Electronics specialization

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

30 years experience soils concrete and asphalt testing, radiation safety officer, Laboratory technician/supervisor/manager. Full responsibility of laboratory procedures, reporting, calibrations,training of technicians and administration of office.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Network Planning including load flow, short circuit and transient stability studies using PSS/E and various other planning softwares

Civil engineer with 17 years experience

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Design of civil engineering infrastructures such as retaining walls, septic/soakway, channels etc and multi-story building

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

To secure a challenging managerial position as Electrical Engineer in a progressive reputed organization which facilitates professional growth and utilization of my qualification and experience, while embracing new methodologies & strategies to remain competitive in the market.

Inspection in all fields

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Having 5 Years 8 Months of experience in software testing.

Im a Civil Engineer with experience in high rise construction, residential housings, exclusive villas both in office and site. Im proficient in microsoft office and excel, & basic AUTOCAD. im hard worker, willing to work long hours and learn more things related with my profession.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out