Resume - Has more than Seventeen (17) Years of continuous experience in Cost Engineering ...

Misco Jobs

Resume #70600

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Pre-Construction Phase: Preparation of budgetary estimate; preparation of value engineering in the event that Owner's fund was not enough; coordination with consultants/designers; preparation of detailed estimates, bid documents and evaluation of bids; preparation of construction schedule and cash flow; preparation of contracts and notice of award or notice to proceed.
Construction Phase: Project supervision and monitoring of schedule; evaluation of contractor's billing and additional works/variations; coordination with consultants, designers and contractors; preparation of comparison between the actual construction cost versus the budgetary estimate.
Post-Construction Phase: Preparation of final inspection and acceptance certificate to different contractors; consolidating all documents needed in turning over the project such as the as-built plans and occupancy permits.
Projects involved are from medium to high rise residential/commercial buildings, hotels, clubhouses, log homes, MRT, warehouses, cinemas, low cost housing, infrastructure works. Also, with knowledge and experience in structural design.
-------------

OBJECTIVE:
------------
To work in a challenging role that will innovate career growth. To work on a company that provide opportunities and challenges to new ideas of innovation.
------------

WORKING EXPERIENCES:

DECEMBER 2006- DECEMBER 2007
Name of Company: Al Rajhi Construction-
Sharjah, UAE
Position: SENIOR QUANTITY SURVEYOR
Duties and Responsibilities During Tendering:

* Preparation of detailed take-off for unit cost derivation for tendering using the Construction Computer Software (Candy).
* Preparation of tender clarification.
* Preparation of request for quotation from different suppliers and subcontractors.
* Summarizing and preparation of tender document for the Client.

Duties and Responsibilities – Construction Stage:

* Preparation of correspondence requesting for the issuance of Engineer's Instruction in order to validate works.
* Evaluation of subcontractor's monthly billing and variation works.
* Preparation of monthly payment application to the Client by computing the monthly percentage accomplishment, attaching drawings pictures, drawings and other documents to validate the claims.
* Preparation of variation by doing the detailed take-off and gathering all documents to substantiate claims.

Project Handled:
* Al Salam City- INFRASTRUCTURE Project (Including MEP scope)
* Jebel Ali Downtown Infrastructure Work (including MEP scope)
* Business Bay View – Business Park Infrastructure (including MEP scope)
* Al Anbar Low Cost Housing Infrastructure Wok
* Palm Jebel Ali Crescent A – Infrastructure Works and Bridge

OCTOBER 2005 – DECEMBER 2006
Name of Company: Peremba Construction (Malaysian Firm)
Dubai, UAE
Position: SR. QS/ CONTRACTS ENGINEER
Duties and Responsibilities:

* Preparation of correspondence requesting for the issuance of Engineer's Instruction in order to validate variation works.
* Preparation of variation by doing the detailed take- off and gathering all documents and drawings required in order to substantiate claims.
* Preparation of unit cost derivation for new items not reflected on the Bill of Quantity. This will include attaching invoices for materials and sub- contracted items.
* Evaluation of subcontractor's monthly billing by checking the accuracy of accomplishment.
* Preparation of recommendation of payments for subcontractors
* Evaluation of subcontractor's claim for additional work by means of verifying the validity of claim; checking accuracy of quantities against the revised drawings; checking accuracy of unit cost for scope of work already specified in the contract and checking the accuracy of unit cost derivation for new items not yet included in the contract.
* Preparation of monthly payment application to the Client by computing the monthly percentage accomplishment, attaching drawings, pictures and other documents to validate the monthly claim.

Project Handled:
* Movenpick Hotel and Center Residence in Deira, Dubai. UAE

JUNE 2003 – AUGUST 2005
Name of Company: EAST WEST Center- Philippines
Position: PROJECT MANAGER (CONSULTANT)
Duties and Responsibilities:
* Preparation of bid and contract documents
* Preparation of in house detailed estimate that will serve as construction cost guidelines and compare it with the contractor's bids.
* Evaluate Contractor's proposal by means of checking the accuracy of quantities and unit prices, verify completeness of scope of work and check compliance with the specifications and other requirements in the Bid Documents.
* Prepare budgetary estimates in order to establish the funds required to complete a certain project.
* Prepare value engineering cost in order to meet the available funds of the Client/Project Owner.
* Prepare cash flow to inform Client/Project Owner of the monthly expenditure of the project.
* Prepare recommendation to the Client/Project Owner for the Contractor with best offer.
* Prepare and issue a Notice to Proceed and Notice of Award in favor of the winning Contractor.
* Prepare project schedule in MS Project for strict compliance of main contractor & sub- contractors.
* Lead the coordination meeting between client, designers and contractors.
* Daily checking of quality and quantity of works of contractors as per technical specification.
* Evaluate Contractor's claim for additional work by means of verifying the validity of claim and checking accuracy of quantities and unit cost.
* Prepare recommendation of payments for Contractors.

NOVEMBER 1999 – MAY 2003
Name of Company: INTERPRO, INCORPORATED- Philippines
Position: Contract Administrator/ Quantity Surveyor
Duties and Responsibilities:
* Prepare budgetary estimates in order to establish the funds required to complete a certain project.
* Prepare value engineering cost in order to meet the available funds of the Client/Project Owner.
* Supervise and check the in-house cost estimate that will serve as the Construction Cost Guidelines.
* Evaluate Contractor's proposal by means of checking the accuracy of quantities and unit prices, verify completeness of scope of work and check compliance with the specifications and other requirements in the Bid Documents.
* After the technical analysis and evaluation, negotiate with the three lowest bidders for further price discount.
* Prepare recommendation to the Client/Project Owner for the Contractor with best offer.
* Prepare and issue a Notice to Proceed and Notice of Award in favor of the winning Contractor.
* Prepare Contracts in favor of the winning Contractor.
* Evaluate Contractor's claim for additional work by means of verifying the validity of claim and checking accuracy of quantities and unit cost.
* Prepare recommendation of payments for Contractors.
* Track payments made to Contractors.
* Monitor actual cost incurred for the project versus the approved budget.
* Inform Client/Project Owner for the effect in the approved budget whenever there is a revision in construction drawings.
* Prepare cash flow to inform Client/Project Owner of the monthly expenditure of the project.
* Close coordination with the Construction Manager to tie up construction progress versus the programmed cash flow.

Projects Handled:
* Condotel Manor 2E is a 4-Storey Hotel Building with a total floor area of 16,800 square meters located at Camp John Hay, Baguio City.
* Golf Clubhouse with a total floor area of 5,500 square meters located at Camp John Hay, Baguio City.
* Voice of America Log Homes – 25 units of log cabins wherein the average floor area per unit is 600 square meters located at Camp John Hay, Baguio City.
* Country Homes – 42 units of typical houses wherein the average floor area per unit is 250 square meters located at Camp John Hay, Baguio City.
* Duplex Log Unit – 7 units of log cabins wherein the average floor area per unit is 240 square meters located at Camp John Hay, Baguio City.
* Renaissance 3000 is a 31-Storey with 4 Basements Residential/Office Building with a total floor area of 70,619 square meters located at Renaissance Center, Meralco Avenue Pasig City.
* Renaissance 5000 is a 31 Storey with 4 Basements Residential/Office Building with a total floor area of 70,020 square meters located at Renaissance Center, Meralco Avenue Pasig City.
* Tower B of Eight Sto. Domingo Project is a 17 Storey Residential Building with a total floor area of 37,456 square meters located at Biak-na-Bato/Calamba Street, Quezon City.
* Poro Point Development Project located at San Fernando, La Union which consists of Temporary Convention Center, Beach Villas, Beach Clubhouse and Administration Building.
* Site development for ECOCENTRUM Business Park located at Southwoods, Binan Laguna. ECOCENTRUM has a total lot area of 25 hectares.

MAY 1996 – OCTOBER 1999
Name of Company: PARSONS International Ltd-Philippines

Position: LEAD SR. COST ENGR.- PROJECT CONTROLS

Duties and Responsibilities: (GIZAN Military City Projects in Saudi Arabia)
* Preparation of detailed quantity take-off and costing
* Check the accuracy of quantities and unit prices.
* Develop database and preparation of unit cost derivation using Composer Gould software.
* Preparation of construction schedule

Duties and Responsibilities (PIJV Projects):
* Preparation of detailed quantity take-off and costing
* Evaluate contractor's proposal by means of checking the accuracy of quantities and unit prices and verifying the completeness of bid.
* Evaluate contractor's claim for additional work by means of verifying the validity of change order and checking accuracy of quantities and cost.
* Monitor actual cost incurred versus the approved budget.
* Coordinate with different sub-contractors and suppliers in order to secure quotations.
* Preparation of budgetary estimates for projects like ECOCENTRUM, Camp John Hay Development, Aurora Quezon Project and METRO RAIL TRANSIT Commercial Development Project.

AUGUST 1995 – APRIL 1996
Name of Company: ECOFORMWORK SYSTEMS Philippines
FORMWORKS CONTRACTOR
Position: Chief Quantity Surveyor
Duties and Responsibilities:
* Preparation of cost derivation and check quantity take-off.
* Preparation of structural analysis to determine the right section required for formwork frame and sheathing.
* Determine the right allocation of formwork systems in order to achieve the target completion date.
* Coordinate with Clients/General Contractor during negotiation.
* Provide structural computation/analysis of formwork systems whenever required by the General Contractor.
* Projects handled were Heritage Building located at Makati City, 37-Story Twin Tower located at Vito Cruz / Pasong tamo Makati City and Japanese Embassy located at Roxas Boulevard.

JULY 1992 – NOVEMBER 1995
Name of Company: DYNAMIC SYSTEMS, INC. Philippines
Position: Quantity Surveyor
AUGUST 1990 – JUNE 1992
Name of Company: LINEAR CONSTRCUTION CORP.
Position: ESTIMATOR/STAFF ENGINEER

Duties and Responsibilities:
* Preparation of detailed quantity take-off and cost derivation.
* Preparation of bar chart/schedule as part of the requirements in submitting proposals to Client.
* Preparation cost proposals specifying the construction cost, scope of work, completion period, terms of payment and other conditions.
* Evaluate and prepare billing of sub-contractors.
* Gather quotations from different suppliers and sub-contractors.
* Projects handled were 16-Storey Residential/Office Building located at C.M. Recto, Manila; M.Y. San Warehouse located at Cainta Rizal; Cinema Complex located at Rosario, Cavite and TNPC Warehouse located at Naic, Cavite.
* Preparation of material and quantity take-off, cost estimates of material, labor and equipment of various horizontal and vertical structures which include school building, roads, piping works and drainage systems.
* Preparation of bar chart/schedule as part of the requirements in submitting proposals to Client.
* Inspection of quantity and quality of construction materials used in the project.
* Gather quotations from different suppliers and sub-contractors.

------------

EDUCATION & CERTIFICATION:
------------
COLLEGE: UNIVERSITY OF SANTO TOMAS
Degree: Bachelor of Science in Civil Engineering
Location: Manila, Philippines

SECONDARY: FAR EASTERN UNIVERSITY
Location: Manila, Philippines
PHILIPPINE LICENSES:

Registered Civil Engineer: License Number – 0063271 (Rating 80.5%)

Registered Junior Geodetic Engineer: License Number – 0005187 (Rating 76%)

ADDITIONAL INFORMATION:
------------
Present VISA: Social Visit Visa- Sarawak
Place of Birth: Metro Manila, Philippines
Nationality: Filipino
Height: 5'1"
Weight: 98 lbs.
Civil Status: Married

SEMINARS:

March 02, 2001: Construction Contract Claims, Administration and Disputes
April 7-8, 2000: Use of Computers in Civil Engineering
July 16-17, 1999: Insights of the 2S of Construction Scheduling (CPM & Safety)
February 12 –13, 1999: Computer Application in Construction Estimating & Management
August 9, 1997: Sanitary and Plumbing Workshop Seminar

SPECIAL SKILLS:
* Driving
* Computer Literate
* Using MS Excel 2000 and Composer Gould for estimating
* Using MS Word 2000 for contract preparation
* Using STAAD III for structural design
* Using MS Project 2000 for scheduling
* CANDY Software for Material Take- off
* Knowledge of FIDIC Standard Regulations Requirements
* Using AUTOCADD (basic)

------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2793)

Go to Search Parameters...

Brief Description

More than 25 years experience in electrical field.

Civil & Structural & QAQC Construction Superintendent

Hands on experience in planning, erection, commissioning and trouble shooting of Cement Plant Machinery. Additional experience in Refractories for kiln and Steel Casting parts for Cement Plants. Diploma In Mechanical Engineering (4 years - Industry Integerated from Larsen & Toubro Institute)

Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries

Civil engineer

A Senior Project Engineer with a wide range of experience in Construction and Maintenance. Able to work on own initiative and as a part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve the planned objectives.

Phisicyst with Power Electronics specialization

Diploma civil engineer from Mumbai(1st class with distinction)have 23 years of actual field experience of executing various types of civil works in & around Mumbai & pune.I hereby attach my C.V.along with this letter for your consideration & evalution.

30 years experience soils concrete and asphalt testing, radiation safety officer, Laboratory technician/supervisor/manager. Full responsibility of laboratory procedures, reporting, calibrations,training of technicians and administration of office.

* Construction Project Manager * Engineering Design Manager * Civil/Structural Engineer

Network Planning including load flow, short circuit and transient stability studies using PSS/E and various other planning softwares

Civil engineer with 17 years experience

Objective: Joining Challenge job in a progressive organization in which I can be best utilized and developed according to my abilities and performance efficiency.

Over 40 Years Quantity Surveying/Cost Estimating experience on projects in Ireland, England, Australia, Greece, Middle East and the USA. Largest project: Headed the US office working on King Khalid Military City , North Eastern Saudi Arabia ($6 Billion for the US Army Corps of Engineers)

I am currently looking for a construction assignement overseas, in the fields of instrumentation or building management systems.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter (Brown & Root, GE),

I am a multi field Estimator, Designer and Project manager, Electrical and mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Mining Engineer and Geologist with twenty-seven years’ in precious and base metals, coal and industrial minerals. P. E. licenses in three states, with unique construction achievements. Advanced technical and strong supervisory skills in underground and surface settings.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

Looking for a new challenge at the end of 2003 my present contract end then

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Design of civil engineering infrastructures such as retaining walls, septic/soakway, channels etc and multi-story building

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

To secure a challenging managerial position as Electrical Engineer in a progressive reputed organization which facilitates professional growth and utilization of my qualification and experience, while embracing new methodologies & strategies to remain competitive in the market.

Inspection in all fields

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Having 5 Years 8 Months of experience in software testing.

Im a Civil Engineer with experience in high rise construction, residential housings, exclusive villas both in office and site. Im proficient in microsoft office and excel, & basic AUTOCAD. im hard worker, willing to work long hours and learn more things related with my profession.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out