Resume - 6+ years Programming and Drawing experience in CAD with a broad understanding of...

Misco Jobs

Resume #71192

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To obtain a challenging position which will enable me to utilize the knowledge and skills I have acquired throughout my education and previous employment experience and also a suitable position in a reputed company to accomplish long-term career goal.

EDUCATION

B Sc. Engineering in Mechanical Engineering from Bangladesh University of Engineering and Technology (BUET) – 2000.
H.S.C., Notre Dame College, Dhaka, Science, First Division, 1993.
S.S.C., Rampura Ekramunessa High School, Dhaka, Science, First Division, 1991.

WORK EXPERIENCE

March 2008 – Present Assistant Manager
Bangladesh Building System Limited
Bonani, Dhaka

Bangladesh Building System Limited (BBS) incorporated in Bangladesh in response to the increasing demand for quality Pre-Engineered steel building especially in the industrial sector. BBS is looking for manage, seek expertise and obtain technology to provide Engineering solution by supplying steel building systems with quality and best customer services.

Here my responsibility is to meet the client requirement and satisfaction, manage to work with all my team members as a project manager. Also I am expertise on software customization and to fulfill cent percent client requirement and our in-house project.

July 2003 – March 2008 Senior CADD Engineer
BJIT ODC Limited
Baridhara, Dhaka
BJIT ODC Limited is a joint venture company between Finland and Bangladesh providing solutions to mainly Finland clients. It is a CAD and Software company providing convert 2D to 3D drawing, software development, software products, and custom programming services, mobile games to its clients.

In this company I was responsible for all technical support of the software and newly implemented project distributed among the members as a technical and project manager.

July 2002 – June 2003 Software Engineer
VMCL
Baridhara, Dhaka

VMCL is a joint venture company between Japan and Bangladesh providing solutions to mainly Japan clients. It is a software company providing software development, software products, and custom programming services, mobile games to its clients.

Here my main responsibility to provide software solution as a team leader and give support to my team members.

September 2000 – June 2002 Programmer
Net Planet Information System Ltd.
Malibug, Dhaka

Net Planet Information System Ltd. is a sister concern of Al-Muslim Group of company to providing solution to mainly Garments related clients. It is a software and hardware company providing software development, software products, and network solution and hardware maintenance.

I do all above jobs as a team member and give technical support in network solution and hardware section.

SUMMARY OF QUALIFICATION

1) 6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E, J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDBMS,HTML, Flash MX, VBA.
2) Extensive familiar with the concepts of the Object Oriented Programming.
3) Extensive familiar with the parametric solution.
4) Strong team player and leadership with excellent organizational, presentation, interpersonal and communication skills.
5) To fulfill client requirement under pressure.
6) To take quick decision and feed back to the client.

COMPUTER SKILLS

1) Language: Visual C++, Visual Basic-6, Java, Developer 6i,
Java Servlet, Java Networking, Perl, C Language,
Iappli, MIDlet, VBA.
2) Drawing: I-DEAS, CATIA, UGS-NX, AutoCAD and Mechanical
Desktop, Inventor, Pro/E.
3) Application: MS Word, MS Excel, MS Power Point, MS Front
Page.
4) Web Scripting: Flash MX, HTML, Java Script, ASP, PHP.
5) Graphics: Adobe Photoshop, Adobe Illustrator, Corel draw
6) Modeling and Animation: 3D Studio Max
7) Database: SQL Server, Oracle 8i, My sql, PostgreSQL.
8) Hardware: Complete Setup System, Trouble shooting and
Maintenances.
9) Operating System: Window's-98, Window's 2000 Professional,
Window 2000 Server, Window XP, Red Hat Linux.

PROJECTS

* 3D modeling & 2D detailing
Client: Metso Paper, Finland
Team: 4
Tools: CATIA V5
Role: Team Leader and Technical Manager
Description: These are continues projects for one of the largest panel board manufacturing company in Finland. We are conversion drawing which convert 2D drawing to 3D also check the proper dimension to needed the assembly or product drawing.

* 3D modeling & 2D detailing
Client: Metso Minerals, Finland
Team: 5
Tools: I-DEAS
Role: Team Leader and Technical Manager
Description: This is irregular projects for one of the heavy Mining Company in Finland. We are converting their existing drawings to 3D models & 2D workshop drawings.

* Re-Design
Client: Metso Minerals, Finland
Team: 3
Tools: I-DEAS
Role: Team Leader and Technical Manager
Description: Modifying the existing design of heavy industrial mining equipments according to customer requirements.

* CATIA V5 Customization
Client: Metso Paper, Finland
Team: 2
Tools: CATIA V5 & VBA
Role: Team Leader
Description: Customization of CATIA V5 Environment as per the client request using CATIA VBA.

* Development of a CAD software "PSLCAD"
Client: Pipe Supports Limited, UK
Team: 6
Tools: AutoCAD 14/2000/2000i, AutoLISP
Role: Team Member
Description: Development of CAD software for automatic generation of drawings and Bill of material. The software allows the user to create plan, front and side views of various Pipe support components manufactured by the client. After the assembly is done, the software allows creating the frame with Bill of material. The same can be used for manufacturing.
My responsibility in this project was to study the specifications provided by the client and design as per that. My responsibility also included client interaction for error free and prompt delivery product to the client.

* 3D Modeling with UGS-NX
Client: BJIT
Team: 3
Tools: UGS-NX
Role: Team Member
Description: In house R&D (Research and Development) project.
* E-Scanner Project
Client: Japanese
Team Member: 8
Language and Technology: Visual C++, Java Script, Flash MX.
This project is the latest technology of the World which is using Camera by reading dot code from the paper. Already it is going on the market. It is more flexible, more security and better out looking than Bar Code. Because it is hide on the Image.
* Plugin Project
Client: Japanese
Team Member: 3
Language and Technology: Visual C++
This project is the Adobe Illustrator plug in project. Here we developed different kinds of shape. Basically here we implement to generate dot code.

* Building Mobile Game using J2ME Technology
Client: Research and Development
Team Member: 2
Language and Technology: MIDP 2.0, Midlet, J2ME.
This project is in initial phase. We create different type of small project to develop ourselves for future coming project.

* Panasonic Learning System ( Studybox )
Client: Japanese
Team Member: 4
Language and Technology: ASP, MS SQL Server 2000.
This project is the Internet based Learning project which any one study from the Internet. It is the existing project in Japan. We developed some function as per Client requirements.

* Office Time Management System
Client: In House Project
Team Member: 4
Language and Technology: Java Applet, PostgreSQL.
This project is our In house project. It is helpful for the office timing system. The Management also gets any kinds of information about the employee from this software.

* School Management System
Client: In House Project
Team Member: 1
Language and Technology: Visual Basic 6.0, SQL 7.
This project is the school management system project. By using this project get any kinds of information from the existing or in coming admitted student.

* Inventory Management System
Client: Al-Muslim
Team Member: 2
Language and Technology: Visual Basic 6.0, Crystal Report, SQL 7.
This is the inventory management system which is developed mainly for the Garments Sector.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 2888)

Go to Search Parameters...

Brief Description

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Extensive experience in the construction of industrial buildings, Multi-story buildings, Steel Structures, Water Structures, Infrastructures Writing Progress Reports, Maintaining and Coordinating Construction work schedules Computer skills: Office 2000, Primavera 5.1, Auto CAD

ELECT. ENGGR WITH 21YRS+ CONSTRUCTION SUPERVISION EXP.PG DIP IN CONST MANGMT AND MSPROJECT PI PPM. INVOLVED IN PROJ MANAGMT CONSULTACY FOR ELECTRICL/PLNNG COORD/QUALITY ASSURANCE COORD AND HSE MANAGEMENT.

Mature Canadian seeking work on major civil projects. Available Immediately.

PROJECT CONTROL

Project Manager/Lead Technician/Fiber Splicer/Inspector

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

(1)Refinery experience: Atmospheric , Vaccum Distillation,SRG Section , Lpg , Visbreaker , Asphalt Blowing , Catalyst Reforming , Isomax ,hydrogen production - gasoil HDS - kerosine HDS- sour water stripper-H2s removal amine treating unit

Results oriented electronics technician. Background includes twelve years of experience in troubleshooting, assembling, installation, testing, upgrading, configuration, support, and maintenance of Audio, Video, Communication devices, Cellular phones, computer hardware and software.

A capable, enthusiastic civil engineer with 12 years experience on site construction specialize in horizontal and vertical construction, tunneling, viaduct, high speed railways, High rise buildings

Mechanical Construction Engineer- Piping Fabrication & Erection. Overall responsible for execution of fabrication & erection works in workshops/ project sites that includes carbon steel, stainless steel, alloy steel , Field erection of fabricated item- Refinery, Petrochemica & Power Plants

I am intrested to work as senior planning engineer with a consultant, project management group or with a developer in Abu Dhabi, UAE

Primavera 3.1- P3E , P5 Planner / Scheduler

Seeking a position with an organization that allows me the opportunity to utilize my education, experience, skills, and talent to achieve and promote a common goal in a teamwork environment.

Construction Engineer in Oil and Gas Facilities

Resume 2003: Joseph W. Bisselle Location: AZ, USA. Objective: Engineering, Supervision, Maintenance or Managerial Position. Relocation and overseas positions are considered.

11 years of rich and diverse experience in Engineering and Construction industry covering wide spectrum of activities including Project controls, Construction Supervision, Quality control etc.,

electrical design/project engineer with 14 years of work

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

I have 30 years total conceptual design experience. I take project from conceptual phase through vendor quotes to final manufacturing layout details.

Career Summary Wide ranging experience in Oil/Gas Industry of participating and co-ordinating multi disciplined workforce engaged in all aspects of Oil/Gas construction management activities. Career progression from project engineer to project co-ordinater and commercial co-ordinator.

I am a fully qualified and experienced Project Mechanical / Piping Designer capable of handling a project from initial concept to final handover utilizing current software, design codes and procedures being used in the Pharmaceutical / Chemical Industry.

Summary of qualifications * Over thirty years of experience in design, engineering, and manufacturing of aerospace, military, marine, and commercial equipment with emphases on robotics and automation.

36 plus years as pipeline construction inspection/consultant.

Aerial and Underground Telecommunications Experience for over 20 years

Electrical Power Engineer (Project and Planning)

Working in Saudi Arabia I gained valuable practical experience, I also developed my project management, communication and organizational skills, essential attributes in order to lead in my field by building a solid technical and theoretical background.

6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E , J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDB

Estimator

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

have plenty of site experience .always worked with big organizations. well computer literate. worked on power station ,industrial and residential buildings

I am a diploma holder in mechanical engineering having 7 years experiance in metalic /non metalic piping both above and under ground

Mechanical Engineer - Inernational Purchasing - Project Management

A competent engineer with a broad range of skills and experience in civil and structural engineering works. Highly self motivated and capable of working under pressure. Seeking employment to broaden my skills and experience with a view to developing a career in construction management

Experience mostly in construction Company, Infrastructure Project, Power Plant, and Railway Project.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Iam a Mechanical Engineer with Technical sales experience in various industries . I am having good communication skills and flair for sales. I like challenging jobs with a target oriented approach. I am sincer, hardworking,and a honest guy. My hobbies include socialising ,travelling,reading

ACI, MCA, Density, Concrete, Agg.Certified

Welding inspector piping & structural

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out