Resume - mechanical structure engineer

Misco Jobs

Resume #71807

CONTACT INFORMATION:
View contact information...

Age: 31
Marital status: Single

SKILLS SUMMARY:
- Mechanical engineer,
- Engineering calculations,
- 3D modeling skills (MSC Patran, Maestro Modeller, Genie Framework, Mechanical Desktop, AutoCAD),
- Use of FEM analysis in stress and self vibrations calculations (MSC Nastran).

PROFESSIONAL EXPERIENCE:

Present
Freelancer engineer. Conducted work:
Freelancer engineer (stress calculations). Conducted work:
- Stress calculation for conrod models in Abaqus ver 6.7-1.
- Stress calculation of engine mounting brackets in Abaqus ver 6.7-1.
- Thermo mechanical calculation of cylinder flame head in Abaqus ver 6.7-1.
- Use of Genie program (SESAM package) for frame check,
- Preparation of load cases for conducted analyses,
- Stress calculations for pipelines in CAESAR II (ver 4.5) according to ASME B31.3 standard,
Review of design for lifting appliances (stress evaluation) i.e.
- 100Te spreader bar,
- Rigitiser used for transportation,
- Chute handling system capacity 45Te, installed on board of vessel,
- Cable drums ~400Te gross including lifting arrangement,
- Offshore containers used for transportation and equipment handling i.e. valves (gross weight up to 25Te).

06/2004 - 10/2006
Mechanical engineer - numerical analysis specialist in Ship Design and Research Center.
Research and Development Department - Ship Structures Division.
Work in stress and vibrations calculation group.
- Build of FE models in MAESTRO Modeller,
- Structure evaluation with help of MG/DSA (stresses and adequacy parameters),
- Structural analysis of structure regions,
- Build of FE surface and solid models for purpose of analysis in MSC PATRAN,
- Global–local analysis for structure with MSC NASTRAN and MSC PATRAN,
- Application of boundary conditions and preparation of load cases for conducted analysis,
- Fatigue assessment for specified areas of analyzed structure including scallops (on level and two levels pod foundations, seating for equipment and crane installed on board) with kelp of MSC NASTRAN and MSC PATRAN,
- Build of model of in AutoSEA2 for prediction of acoustic response of ship in the area of machinery space for fast container ship and car ferry (model included ship conversion according customer's request),
- Vibration analysis of pod foundations and the hull, natural and enforced vibrations analysis (including induced pressure pulses applied for the hull),
- Thermal analysis for exhaust pipelines (MSC NASTRAN, MSC PATRAN),
- Noise level measurements (use of B-K meter) and assistance at vibrations measurements during ship trials on car carrier,
- Supervision of conducted projects - stress calculations for ship structure and equipment installed on board and other mechanical facilities. Use of FEM Method (MSC Nastran, MSC Patran, Maestro Modeller). Contacts with customer and preparation of reports from conducted analysis.
- Impact of Phase Lag Between Propeller Excitation Components on Vibration of a Podded Propulsion Vessel - T-POD'2006. The Second International Conference on Technological Advances in Podded Propulsion

06/2002-06/2004
Senior assistant of designer at PROJMORS Sp. z o.o.
- Creation of technical documentation in 2D – assembly and fabrication drawings.
Preparation of technical directions for collaborating design groups. Projects for marine industry
(quay installations pumping stations), Oil Refinery, NAFTOPORT – fuel base, NATO organization and Polish Army
- Execution of technical expertises.
- Continuous use of AutoCAD 2002i - 2D design and conduction of necessary engineering calculations with help of MathCAD6.0 software,
- Occasional use of 3D modeling software - Mechanical Desktop ver 6.0,
- Preparation of technical specifications for projects,
- Execution of fabrication improvements according to construction company remarks.
- Making inventory of technological installations on fuel jetties.
- Design of handling system for tetrapodes - 50 tons star shaped concrete blocks.
- Improvement of design for slipway used to repair small ships.
- Design of technology for container terminal in Gdansk for Day &
Johnson Ltd. (Great Britain).

08/2000-08/2001
Intern, engineering dept. Advanced Machine & Engineering Co (USA).
- Design of the machines: handling systems, measuring system for automated cutting line series 100 and 200 (blade saws) offered by the company.
- Work within different workgroups: Design & Build Group, Fixture
Group designing workholding fixtures for parts of the machines (i.e.
castings) requiring machining.
- Creation of assembly drawings mentioned above machines and detail drawings for parts (with help of CAD tools such as Mechanical Desktop
5 & 6, AutoCAD2000i).
- Debugging of designed machines and conduction of all the necessary engineering calculations for designs (MathCAD 6.0).
- Supervision of assembly process designed machines and check of quality of made parts.
- Preparation of reports for customer containing description of work improvement in assembly of machines.

QUALIFICATIONS:
- Master of Science in Mechanical Engineering. Technical University of Gdansk. Marked out for very good marks archived during study. Graduated 2000.
- Languages: English (very good),
- A Level Exam (Polish, English, Mathematics, and Physics) passed with very good marks.
- FEM analysis in MAESTRO Modeler 8.1, MSC PATRAN, NASTRAN and Genie.
- Trained for API 579.
- Driver's license.

PERSONNEL ATTRIBUTES:
- Self motivated,
- Efficient in looking for solutions,
- Team player,
- Reliable.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 2821)

Go to Search Parameters...

Brief Description

Project cost control / scheduling

Proven ability to provide Industry initiative and leadership. 20 years of experience with all aspects of integrated instrumentation, software design, project management, and installation of projects. Projects of various magnitudes ranging from board level to major industrial development.

I am a highly motivated and ambitious Senior Electrical Engineer who worked in Emirate , Saudi Arabia , Kuwait , Iraq & Lebanon since 1994 and interested to pursue my future professional career in your company. The scope of work I am looking for is a job in the field of Residential Industry ,

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Diploma in mechanical engineer , i am working in mechanical supervisor in kuwait.

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

Experience Crushing and Screening engineer armed with mechanical degree have more than 10 years of working experience in a few Multi-national organisation around Asia region (Singapore, China, Malaysia and Indonesia). Advance Project management and IT skills.

Proven and effective manager of comlex products. Can build successful project and resource teams. Decision maker, optimistic and hard working. Analytical and innovative. Referred to as the "Go to problem solver".

Buyer/Expediter

Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Account Management - International Department

As you will see from my attached RESUME, I am an Indian citizen, and have a Bachelors degree in civil engineering, which I have passed in first division with distinction and I have 9 years experience, in positions of Project Manager, Project Engineer & Site Engineer.

Painting inspector NACE level 1

MathCAD; Caesar II; Microsoft Office Applications

Marine Engineer from Greece, Languages: Arabic, English, Greek, Italian. Experience = 16 Y. Eni Oil Co. Ltd.1/6/ 1999. Title Senior Plant technician, skills: Microsoft word, excel, Amos, Internet

A Certified Explosives Supervisor offering 20 years of proven experience, having strong track record of generating extraordinary performance in drilling project; aspiring for a challenging position as an Explosive Supervisor in the Mining Sector

Mechanical engineer (4 yrs degree) with appx 15 yrs exp in Contract & Project management. LOOKING FOR CHANGE IN MIDDLE-EAST, CANADA OR INDIA (AVAILABLE FOR IMMEDIATE START)

Seeking a Management position where my considerable experience and knowledge of Construction civil estimating and project management that can be fully utilized to help drive employer profit margins and complete contracts on time.

Planning engineer, scheduling, primavera, project , cost control, mechanical , manufacturing , boat

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

Dear Sir,

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

Metallurgical Engineer

I am an electrical engineer interested in the power field. I had an internship dealing with daily activities of an engineer and I have taken three power related classes.

Chemical engineering background with site experience including site engineering, commissioning, performance testing, and construction.

I have over 20 years International Electrical/Instrumentation/Control Systems Construction and Commissioning Experience as Supervisor, Superintendent, and Managerial positions.

Ph.D. in Geology from IIT kharagpur, M.Tech.in Geology from IIT Roorkee, India

CSWIP 3.1 Welding Inspector, ASNT Level-II in NDT's RT/UT/MT/PT, ISNT Level-II in leak testing methods, Over 7.5 years in QC & Inspection with reputed Indian Multinational

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

EPLAN, Siemens SIMATC WinCC Step7, Ladder Programing, Rockwell Automation SW, Function Block Logic Programing, Statement List Logic Programing, AutoCadEnergy Solutions Leak Detection Tools (Pipeline Studio, ESIForms)Microsoft Office (Word, Excel, Power Point, Visio), MS Projects, MS computer OS

A well-educated and experienced Safety Resource possessing a strong goal-oriented

Experience in Conveyor Belt design and maintenance, Conveyor System maintenance, and Construction engineer. Worked as a supervisor, sales engineer and mamanger. Qualified Japanese Gijutsushi (equivalent to APEC engineer) in construction.

Project Manager, QA/QC Wireless Telecommunications

mechanical structure engineer

Conducting procurement, sales and foreign purchases of Zagros Methanol producing Company (Mega Methanol Plant)in Assaluyah

mechanical engineer having knowledge of AUTOCAD, IDEAS, CATIA v5

Outside Plant Technian, Bell System Trained, College Degree, AVAYA ACS PBX READY, copper/fiber palnt install/test/termination, Cat 5 and 6 as well as paging, cameras and home theater seeks contract/fulltime work in Middle East or almost anywhere in the world..

Mechanical Drafting and knowledge in 5 Axis CNC programming and machine operation.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

Civil / Structural Engineer, Project Engineer

BSC.GEOMATIC ENGINEER(SURVEYOR)

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

I have 8 Years exp in Oilfields & industrial: as an instrument forman to maintain all process erlated instrumentation works includes automation

QA/QC in Air cooled Heat exchangers, Boiler,Structurals, Wind mill tower, Mines equipments,etc..

Vast Experience in Document Control, Administration, Human Resourses and IT

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

W/WW industry: 28+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component of W/WW systems

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out