Resume - Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Tur...

Misco Jobs

Resume #72018

CONTACT INFORMATION:
View contact information...

Summary

Experience of work in a multinational environment
Organized, rigorous, analytic and very flexible in news
Abilities and knowledge about interpersonal communication, editing, presence
Working under stress
Team leader- from 4 up to 6 persons
Driving license – B
Nice appearance

WORK EXPERIENCE

Oct.2007-Up to present
Location & Company:Tunisia,Capo Buono,Sergas-Eni,NOUVO-PIGNONE-General Electric
Department:Maintenance
Position: Supervisor Turbine
Tasks & solved problems:
-The project incorporated 10 units GT's GE5FA and and 10 centrifugal gas compressors.
Performing mechanical maintenance and revision works for turbine and afferent compounds that required to be checked and ensuring proper tests and technical assistance for the installation and commissioning.

June 2007-Oct. 2007
Location & Company:Egypt,Cairo Electricity Production Company(Cairo North Power Station II), NEM GROUP-HOLLAND
Department: Commissioning and Start-Up
Position: Process Operating Specialist(Steam Blowing Commissioning Specialist)- DCS-Operator
Tasks & solved problems:
-The project incorporated 2 units GT's GE9FA with output 256 MW,
2 HRSG and one Steam Turbine Alstom(combined cycle) 315 MW.
I have worked with 2 HRSG(Heat Recovery Steam Generator) made by NEM with horizontal gas flow design and three pressure levels and re-heat.I was involved in commissioning and start up of HRSG's like DCS Operator.My tasks were regarding and operating the DCS(latest type of General Electric)system and safety valves checking.
- To assure the correct running of boilers.
- Maintains and promotes high standards of work targeted to achieving safe, optimal process performance.
- Supervising the plant process parameter in order to meet the production requirements.
- Closely monitors critical process parameters, process performance and efficiency, initiating changes as necessary through subordinate work teams.
- Monitors abnormal process and plant conditions, incidents, hazards or emergencies; initiates and supervises action to correct or contain same, reporting incidents and near misses per procedure.
- Troubleshoots isolated and recurring process and equipment upsets in consultation with NEM commissioning team, subordinate personnel, process and maintenance experts.

Mar. 2007-June 2007
Location & Company:Kingdom of Saudi Arabia, National Chemical Fertilizer Company Al-Jubail,ELLIOTT EBARA Group,Gas Arabian Services
Department: Maintenance
Position: Turbines Supervisor
Tasks & solved problems:
-Mechanical overhauling for Fuji-Electric Steam Turbines(single cylinder type), 25 MW power- manufactured by Fuji Electric

-Disassembly of emergency valve,governor valve,bearing cover,rotor,nozzle,gland labyrinth and check, replaced the damaged parts and reassembly. Center alignment check and correction and start-up. Functional test, oil flushing,check up coupling and load test.

Nov.2005-Ian.2006
Location & Company:Lybia-Mediterranean Sea,ELETTRA ENERGY-SAIPEM, ENI-GAS ITALY-LYBIAN BRANCH-Sabratha Platform
Department:Production
Position:Turbine Operator,Power Plant Operator
Tasks & solved problems:
Scheduling of mechanical,electrical and instrumentation work
I have worked with Power Generation Turbines SGT 300 Tempest 7,9 MW-manufactured by Siemens.
Routine operations such as start up and shutdown, change over from duty to stand by of gas turbines generators,load sharing,power factor adjustment,auto-synchronizing operations,power supply restoration after shutdown,emergencies including black start-up.Perform basic routine maintenance activities such as:changing fuel,air, oil filters, maintaining oil levels and other minor associated activities.Perform periodically cold washing on gas turbines.

1996 – Nov.2005
Location & Company: Romania- Black Sea,SNP PETROM-PETROMAR,MEMBER OF OMV GRUP AUSTRIA RIG-SERVICE SA-The Main Oil Production Platform in Black Sea
Department:Mechanical and Electric
Position: Turbine Technician,Mechanical Technician,Operator Boilers,Mechanical Supervisor

Tasks & solved problems:
Scheduling of mechanical, electrical and instrumentation work
I have worked with gas turbine,Typhoon- European Gas Turbine made by Siemens-Alstom Power and Solar gas turbine.I repairing, overhauling, tuning, monitoring of perfomance level, visual checks all the components of turbine compressor and turbine blades, combustion system vents and drains, lubricating oil system, filters oil, emergency and auxiliary lubricating oil pump, fuel system, gas fuel throttle valve and actuator, block valves, igniter system, starting system, hydraulic pump, inter stage bleed system, variable guide vane system, acoustic enclosure and vent system, air intake system, exhaust system, gearbox, starter clutch. Also, I have worked with: auxiliary apparatus (compressor cleaning system for washing the compressor and boroscop checks )
I have worked with boilers manufacturing by Alborg LTD monitoring of perfomance level (operator boiler)
I have worked with injection water pumps Shulltzer,air compressors Ingersoll Randall,water pumps Grundfos,reciprocating gas compressors Dresser Rand(maintenance) and other installation for a production platform.

1992 – 1996
Location & Company: Romania, Romanian Air Force
Department: Aircraft
Position: Aircraft Technician
Tasks & solved problems

Performing maintenance and revision works for aircrafts and afferent compounds that required to be checked and ensuring proper tests and technical assistance for the installation and commissioning.

STUDIES
2005-present University of Computer Science Bucharest-Romania

1989-1992 Military College of Aviation Masters
Specialization-Structures and Aircrafts Engine Medias-Romania

1985-1989
National High School "NICOLAE BALCESCU" Covasna-Romania
Section-Mathematics and Physics

TRAINING
2006-BOSIET COURSE(Basic offshore safety induction and emergency training)- –(H2S-certificate,HUET-certificate,fire fighting-certificate) OPTIO-PAVIA,Italy
2000-International Computer School –Bucharest Romania

COMPUTER ABILITIES:

MS Office: Excel, Access, Word – professional

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 3119)

Go to Search Parameters...

Brief Description

Mechanical maintenance equipment of all types

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

Italian citizen, born in 11th may, 1979; Building engineer with 1year of experience in engineering and 5years of experience in architecure and design.

To secure a senior level position responsible in Project Management, Engineering, Procurement and Construction aspects of heavy industrial petrochemical, chemical and power plant projects.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Certified Welding Inspector

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

As apparent in my resume I have close to 2 years of work experience. The most predominant project I was assigned too was at Motorola. I was working on a New York state-wide two-way radio communication network for emergency personnel.

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Operation/Management/Audit * Shipbuilding * Ship Repair/Modification * Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) * Quality/Safety Management & Certification * International Standards * Project Management

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Kahramma and Qatar petroleum Authorised Electrical Engineer with skills of Automation and 1year Experience in EHV U.G cable installation inside live substation and in infrastructure.

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

I am BE (Mechanical). I am working as Assitant Planning Enginner In PECL at LNG Project Of Shell Gas Pvt. Ltd. at Surat

looking for a job

Looking for work as a civil engineer

Strong computer skills utilizing CAD, GPS & data collection systems. Analysis of survey data and its use combined with aerial photogrammetric surveys. Quality control of digital mapping. Layouts for construction works. Management of multiple survey crews.

Civil Engineer seeking position in the oil Business or Construction

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Autocad, Primavera Planner, Excel, photoshop My special skills.

OFFSHORE C & I

18-years of Middle East work experience on Major Projects Documentation in Oil & Gas Industries. Capable to operate different EDMS programs and familiar to Vendor & Design Technical Documents and Engineering Drawings.

I have vast experience in pipeline engineering & integrity involving smart pig, pipeline cleaning, coating. Also, I have experiences in decommisioning of pipelines and skills in engineering maintenances involving static equipment, Corrosion & OCTG.

Civil engineer (having good skill in building design and drafting using autocad application, surveying and plotting and drafting survey map using auto cad land development, structure design, have good knowledge in GIS and HEC-RAS, etc)

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

To offer a background 0f 15 years experience in EPC & Commissioning including 4 years in construction management and 4 years in project engineering & 7 years in field of construction projects with proven strength in inspiring the confidence and trust of Owners & others of Petrochemicals projects/ref

I have the EIT license and took the PE Exam on April 2009. Familiar with SAP 2000, Staad Pro, Mathcad, AutoCad, and ABAQUS. Academic experience in Civil/Structural Engineering, and professional experience in Environmental Engineering. I am looking to relocate to the Boston Area.

12 years of experience in project management, site supervision, shop supervision, estimation & costing, tendering, inspection, testing and commissioning of cross country pipeline and heavy fabrication

Pipeline construction Engineer with knowledge in Piping Design

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.

HSE Learning/Development Professional seeking position in an industrial setting.

2:1 Honours degree in construction management and Engineering.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out