Resume - Knowledge in Project management skills like Production control ,Costing ,Project...

Misco Jobs

Resume #72471

CONTACT INFORMATION:
View contact information...

Objective

To obtain a managerial position that will allow me to share my knowledge and experience to the company and to increase profit margins, productivity and quality with challenging and rewarding position.

Summary of Achievements
Accomplished Project oriented person with more than Eleven(11) years experience in the field of Project management.

* Planned, directed, and managed designated projects.
* Analyzed results of fabrications to discover more efficient ways and utilize resources.
* Coordinated the successful simultaneous development of several projects.
* Delegated responsibilities and designed time schedules
* Negotiated contracts that ensured quality.
* Reviewed project status reports during each stages of fabrications.
* Prepared weekly project status reports for management and clients.

Experience

Overall working experience of 11(+) years in overseas and India. At Site (Power plant -Malaysia) and factory Fabrications of Steel structures, Ducting, Casing for Power plants, Bridges, Conveyors, Tanks, Railings as Project manager, Project Engineer, Project controller include expediting jobs in EPC contract.

Skill Knowledge

Knowledge in Project management skills like Production control, Costing, Project control /Expediting, Scheduling(Using MS Project), planning, Preparing Bill of materials, Procure materials, Sub contractor control, Quality activities, Documents review, ITP preparations, Client meetings, Design involvements, payment follow up, shipping arrangements and handing over of sites etc.,

.Able to handle and control the Projects (10 projects at one time) and capacity of Production and fabrication control over 2000 ton and more per month.

Working Experience (Present and past ):

TOS Energy, Site at Malaysia.(Short term)

Planning Engineer in site: April mid 2008 to Till date (Until 20th December 2008)

Job Profile and Activiites: Involve in planning, scheduling, progress follow up, progress controlling as an Planning Engineer in 750 MW Combined Cycle Power plants at Port Dickson, Malaysia.

Prepare Over all Schedule of erection, Outage works during Steam blow out and fine mesh Removal, Commissioning of Gas turbine, Steam Turbines, BOP Auxillaries and others. Update the progress on actual, Make Comparision details with Baseline and actual progress, Weightage breakdown, S-Curves for Monthly and weekly plan. Presentation by Power points for weekly and monthly progress to clients including narrative report, Progress photos and others.

All Schedule and progress updated by use of Microsoft Projects.

IHI Corporation – Indonesia (IHI Factory in Indonesia)
Project Control Manager At Factory for IHI Products only - (Oct 2004 – April Mid 2008)

Job Profile and Activiites: Involve and control the projects fabricated at the Sub contractors industry. The total cost of each project handled was average around USD 18,000,000 with in a time limit of 10 months to complete the jobs.

Prepare Costing for the projects, Scheduling and progress controlling by using MS Project, Expediting the projects on time (10 project at one time), Manpower controls in Factory and sub contractors, Evaluation of Subcontractors capacity and their facilities, review invoice and authorize for payments, Quality involvements including ITP Preparations, Quality inspections (Fabricated items, Painting etc), Documents reviews, Shipping meetings and arrangements, Handing over etc.,

Managing the Project fabricated at EPC Contractor around 2000 ton per month Single handed with an on time schedule, cost on control, quality products, and proven profits to the projects.

Report to: Direct Interactions with the General Managers and other Management persons in Japan and in Factory assigned.

Achievements: Project success of around 100% with on time schedule and profit making around 15% from the said value of 7%. Appreciations received from site, factory and Managements.
Song da –Jurong Cons., Co., Ltd – Haiphong, Vietnam (Factory at Vietnam)
Project Manager, July 2001 to Sept 2004.

Job Profile Activities: Involve and control the projects fabricated at the factory as an project Manager.

Over all control of all projects in Factory and responsible to Prepare Costing, Controlling Scheduling and progress flow charts using MS Projects and Excel, , Sub contractor evaluation and controlling, Project resource and Planning, Prepare bill of materials, Procurement of materials and consumables, Material stock controlling, Identification and solve the problems, prepare quality plan documents, Monthly Production reports, Expediting progress, Involvement in shipping and Communications and coordination with clients.

Managing the factory with1200 ton per month with timely scheduling, Cost controlling and project flows and profits to the projects of 25% average.

Report to: Direct Interactions with the Board members, General manager and other Management persons in factory and clients.

Achievements: Project fabricated parts achieved success of around 100% with on time schedule, proper flow of delivery items and profit making around 20 %- 25% from the said value of 10 %. Appreciations from the clients and managements received with an potential raises in my remunerations with in one year of joining the duty.

Blue star Ltd., - Calcutta, India.
Project Engineer, Nov 1997 to Jan 2001

Job Profile Activities: Involve and control the projects at Sites as an project Engineer.

Project Budget and cost preparation. Subcontractor negotiation for site jobs, Over all Control of Entire site activities and arrange proper flows of materials and consumables, Manpower requirements, Meeting and discussion with clients at sites, cost controlling, Payment flows of projects, Project planning, scheduling and progress control using MS Project and Excels, Invoice preparations and Payment follow ups, Site Handing over to clients

Handled 15 Job sites at one time include Outstation jobs in eastern India involve in 80% travelling, Private and Government Organization sites.

Achievements: 100% Achieved customer Satisfaction with as much as Appreciation letters, Awards for on time schedule completions with the desired requirements and with all projects achieving more than 20 -30 % of profits from the said profit of 10%.

M/S Hitech Industries Ltd. –Chennai, India.
Project Engineer, June 1996 to Oct 1997

Job Profile Activities: Experienced in Vendor development, Subcontractor approach, Machine tool production activities, Material procurement, Prepare and arrange material for the factory and control the production activities, scheduling and progress in factory and subcontractors.

Achievements: Timely flow of the jobs in factory with Client satisfaction and managements belief and confidence.

Eveready Industries –Chennai, India.
Vendor developer Engineer, Mid April 1996 to May 1996

Job Profile Activities: Experienced as an Assistant Vendor developer in factory includes control of quality, progress and materials and on time deliveries in commercial and non commercial parts.

Achievements: Though it was a short duration the entire team of procurement was satisfied with the performance and achievements.

Education

Department Of Technical Education, Madras –Tamil Nadu, India
-Diploma In Mechanical Engineering (First Class, April 1996)

Engineers CADD Centre (P) Ltd
- Diploma In Project Management (M.S.Project, Primavera, Suretrak)
("A" –Grade Mar 2001 to April 2001)

SISI, Chennai, Govt of India.
- Diploma in Advanced AutoCAD.
- 2D & 3D Modeling
- Solid Modeling
- Auto lisp programming.

Knowledge in Computer:

MS OFFICE - (Advanced knowledge)
MS PROJECT - (Advanced knowledge)
PRIMAVERA 3.0 (To some extent only)

LIST OF PROJECTS HANDLED:
(In Song Da Jurong Const.Co.Ltd)
S/No. DESCRIPTION PROJECT LOCATION CLIENT
1 PASSANGER BOARDING BRIDGES Changi International Airport Singapore JEL/SMI-Japan
2 PASSANGER BOARDING BRIDGES Narita International Airport Japan JEL/SMI-Japan
3 AIR & GAS DUCTS TOA power plant Japan JEL/IHI- Japan
4 MEASURING TAPES TOA power plant Japan JEL/IHI- Japan
5 ECO CASING TOA power plant Japan JEL/IHI- Japan
6 AIR & GAS DUCTS KB2 Power plant Japan JEL/IHI- Japan
7 TOP ENCLOSURE KB2 Power plant Japan JEL/IHI- Japan
8 ECO CASING KB2 Power plant Japan JEL/IHI- Japan
9 FIXED GANGWAY Changi International AIrport) Singapore JEL-IPD
10 ASPHALT BATCHING PLANT Highway project-India India JEL/IHI-Japan
11 AIR & GAS DUCTS TOKUYAMA Power plant Japan JEL/IHI-Japan
12 AIR & GAS DUCTS UBE Power plant Japan JEL/IHI-Japan
13 PASSANGER BOARDING BRIDGES NOTO Internatioanl Airport Japan JEL/SMI -Japan
14 MHI - Sendai Structures Sendai Incineration plant Japan JEL/MHI-Japan
15 C/W PIPING Naduong power plant Vietnam JEL/MARUBENI
16 DEMIN. WATER TANK Naduong power plant Vietnam JEL/MARUBENI
17 PORTABLE WATER TANK Naduong power plant Vietnam JEL/MARUBENI
18 CONDENSATE TANK Naduong power plant Vietnam JEL/FUJI
19 BOILER DUCTS AND CASING Senoko power plant Singapore CMI
20 AIR & GAS DUCTS K - Power plant Japan JEL/IHI - Japan
21 BUILT-UP BEAM AND EMBEDDED ITEMS Hai Phong - Binh bridge Vietnam IHI
22 DRAIN PIPES Hai Phong - Binh bridge Vietnam IHI
23 BENT STRUCTURE Hai Phong - Binh bridge Vietnam IHI
24 MAINTENANCE VEHICLE & RAILS Hai Phong - Binh bridge Vietnam IHI
25 GUARD RAILS Hai Phong - Binh bridge Vietnam IHI
26 PILE PIPE & SHOES Hai Phong - Binh bridge Hai Phong - Binh bridge IHI/SHIMIZU
27 CONVEYOR STRUCTURE Sesan 3 Hydro power plant Vietnam NIPPON CONVEYOR
(In IHI CORPORATION. ,INDONESIA)
S/No. DESCRIPTION PROJECT LOCATION CLIENT
1 Sumikin Kashima Steel Structures Sumikin Kashima Japan IHI-Japan
2 Sumikin Kashima Buckstay Sumikin Kashima Japan IHI-Japan
3 Tanjung Bin Vertical Brace Tanjung Bin 3 X 700 MW Coal-Fired Power plant Malaysia Tanjung Bin Power SDN.BHD-Malaysia
4 Tanjung Bin Buckstay Tanjung Bin 3 X 700 MW Coal-Fired Power plant Malaysia Tanjung Bin Power SDN.BHD-Malaysia
5 Kureha Kagaku Steel Structure Project Nishiki Power Plant Project Japan IHI-Japan
6 HRSG Structural Steel FT-4 Project Japan GE Power Generation-Japan
7 SCR Parts FT-4 Project Japan GE Power Generation-Japan

8 SCR Parts Kashima power station Japan Sumitomo Metals Indcustries Ltd.,
9 NN-3 Steel Structures Sumikyo Nihama Project Japan IHI-Japan
10 IG-2 Steel Structure Isogo No:2 Boiler Project Japan J Power /IHI-Japan
11 Steel Structures for 400Ton/Hour Boilers Sonatrach Project Algeria IHI-Japan
12 Buckstay Sonatrach Project Algeria IHI-Japan
13 Air & Gas Duct Sonatrach Project Algeria IHI-Japan
14 Steel Structures Toso No.2-6 Boiler Japan IHI-Japan
15 Air & Gas Duct Toso No.2-6 Boiler Japan IHI-Japan
16 Steel Structure FGD Project Japan J Power / Japan
17 Steel Structure Blue Waters Power Station Unit -1 Japan IHI-Japan
18 Air & Gas Duct Blue water Power station Unit-1 Japan IHI-Japan
19 Buckstay Jimmah Negeri Sembilan 2 X 700MW Power plant Malaysia Ishi Power Sdn Bhd /IHI -Japan
20 Vertical Brace Jimmah Negeri Sembilan 2 X 700MW Power plant Malaysia Ishi Power Sdn Bhd /IHI -Japan
21 Steel structure & Buckstay MA-2 Project Japan IHI-Japan

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 3124)

Go to Search Parameters...

Brief Description

PROFESSIONAL SKILLS: AutoCAD (All Old & Latest Version), Aconex (Online Document Management System) , MS-Word , MS-Excel , MS- Power Point and Internet etc.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geolgist having 2 year experience in construction

Design and construction in bridge and road

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

6 years from Military with lots of surveying .

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

Mechanical engineer (naval welding) with 15 years experience seeking a job as supervisor(superintendent engineer).

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Health, Safety Environment Engineer/ officer &

Marine Civil Construction Supervisor

Comprehensive problem solving abilities, good verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.

Bachelor of Science of Electrical Engineer, Drafting Aide Certificate AutoCAD 2009, CAD Operator Certificate AutoCAD 2009, Member of Phi Theta Kappa International Honor Society, Member of National Technical Honor Society, Dean List for 2008-2009

Senior Structural Designer/Construction Support Specialist

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

17 years of expereince in the field of telecom

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

Registered Safety Officer (IBOESH, USA), Registered Civil Engineer-Philippines, IASP, IADC, RIGPASS Certified

Civil Engineer specialized on Structures working towards Masters Degree.

I am a qualified mechanical Engineer specialized in Acoustics

Mechanical Supervisor

Planning & Scheduling Engineer with more than 4 years experience in India & Gulf

Almost 14 years of experience in the Project engineering, system design and detailed engineering of 400/220 kV AC substations and ¡Ó500 kV HVDC Substations.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out