Resume - 7-years High School. Experience covers surface and subsurface production mainten...

Misco Jobs

Resume #72547

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I am now seeking a challenging and rewarding position similar to my previous ones where I can put to good use my over thirty years of experience to assist any corporation in achieving its goals while at the same time continuing my career with good earning potential and possibilities of future advancement.

SUMMARY OF EXPERIENCE:
- Commitment to Safety Management Systems including Permit to Work, Emergency Response Plan and Job Safety Analysis.
- Developed, initiated and implemented routine, preventative and predictive maintenance schedules for all equipment under my purview.
- Initiated and executed short and long term projects designed to enhance drilling and production facilities and equipment usage.
- Developed budgets for fiscal periods inclusive of operating and capital allocations and monitored expenditure to prevent overruns.
- Developed departmental organization structures through recognized manpower requirements and optimization of manpower usage, conducted annual assessments on subordinates and made recommendations for/initiated training, where necessary, for their development/progress.
- Conducted optimization of field and process facilities, production maximization and prepared and submitted all production reports, recommendations and final evaluations.
- Investigated failures and problems associated with production and maintenance operations and developed corrective measures on the principle of diagnostic recommendations and solutions.
- Efficiently and effectively managed the maintenance of heavy industrial and process equipment inclusive of mechanical, hydraulic, pneumatic and electrical systems. Extensive experience in the maintenance of land drilling and well servicing rigs, centrifugal and reciprocating pumps, compressors, beam pumping units, P.C.P's, miscellaneous drilling and production equipment, transport fleet (light and heavy}, onshore and offshore oil production facilities, etc.
- Supervised pre-fabrication and assembly of plant-piping from interpreting blueprints to commissioning. Fabrication and installation / repairs of inter / intra field trunk piping.
- Designed and supervised layout of intra/inter field piping for steam generating systems, water flooding, industrial water and oil transfer in accordance with API and ANSI standards.
- Supervised construction and installation of gas sweetening system for removal of (H2S).
- Supervised the construction of tanks, ring beams, pump and compressor foundations and all other mechanical and civil works associated with oil and gas production, storage and transfer.
- Prepared infrastructure for reactivation of idle wells which includes testing, pumping and bulk storage facilities.
- Conducted topographic survey and general preparation and construction of well locations, access roads and bridges for drilling rig intervention.
- Mentored and trained craftsmen and supervisors in the various aspects of the maintenance and construction of oil and gas production and drilling equipment and facilities.

CONTRACTS:
- Initiated and executed major and minor contract works on field installations from preparation of initial scope of works to commissioning.

PROJECTS:
- On behalf of oil companies, conducted site visits and prepared all relevant documentations to execute proposed work in a safe, cost effective and timely manner
- On behalf of contractors, attended site visits, prepared bid documents, work schedules etc. and supervised and managed projects to completion and/or commissioning e.g.
UMLE Project, Petrotrin F/R, Trinidad.

EMPLOYMENT HISTORY:

Nov 07 – Pres.
Mechanical Superintendent – Drilling International Service and Supply Company Ltd, Trinidad
Jan 07 – Oct 07
Tutor / Consultant in the maintenance field for Drilling Int'l Service and Supply Co. Ltd and Damus Oil, Trinidad.
Nov 05 – Aug 06
Petrokool (Drilling Contractor) – Drilling Rig Maintenance Supervisor.
Mar 05 – Oct 05
Project manager – Land and Marine Contracting Company Ltd - Trinidad.
Projects: Fabricated, installed and commissioned oil and gas storage and transfer facilities.
Laid, supported and commissioned 3 miles 8" dia. crude oil trunk line through forested area.
Replaced sections of corroded and ruptured, buried 10" L/P gas line.
Feb 00 – Sep 00
SADHNA Petroleum Services Co Ltd.
Drilling Rig Maintenance Supervisor – 24/7 maintenance of land drilling rig - Trinidad.
Mar 95 – Feb 98
PETROTRIN
Field Maintenance Superintendent (E & P)(Ag)
Responsible for the maintenance of entire E&P field and included mechanical, civil, electrical and HSE departments.
Trinidad
Mar 86 – Feb 95
PETROTRIN / TRINTOC
Field Maintenance Supervisor (E & P)
Responsible for installing and maintaining all surface equipment, facilities and other infrastructure in oil and gas exploration and production in various fields over the stipulated period - Trinidad.
Jun 83 – Feb 86
TRINTOC
Trainee Supervisor (Exploration and Production)
Mar 80 – May 83
TEXACO Trinidad Inc.
Student Technician (Exploration and Production Dep't)
Oct 76 – Feb 80
TEXACO Trinidad
Refinery Operations- Plant attendant.

ACADEMIC AND TECHNICAL EDUCATION:
- Mechanical Engineering Technician – San Fernando Technical Institute (Trinidad)
- General Certificate of Education "O" & "A" levels – Naparima College (Trinidad)

WORK-RELATED TRAINING:
Drilling and Production Trainee - TEXACO Trinidad INC.
Engineering Trainee - TEXACO Trinidad INC.
Supervisory Training – TEXACO and TRINTOC.
Pump Maintenance - ROOKS Oilfield and Engineering Supplies Limited.
Employee Assistance Outreach program – TRINTOC.
Lubrication of Machinery – TRINTOC.
3D Supervisory Effectiveness Seminar – TRINTOC.
Project Management for Supervisors - S.J. Management Services
Oil Analysis for Predictive Maintenance - Metal Industries Company Limited

SAFETY:

- Recipient of a twenty-two (22) year Accident-free PETROTRIN award.
- Defensive Driving, First Aid and CPR.
- Petrotrin's in-house training as Safety Officer.

COMPUTER SKILLS:
- Working knowledge in Microsoft Office suite {certified}.

OTHER:
- Ability to interact with other professionals and craftsmen for the expedient and safe completion of assigned work.
- Natural Team leader and Team player.
- Willing to relocate.
- Available at anytime with one month's notice.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2797)

Go to Search Parameters...

Brief Description

Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

B.E Mechanical Engineer

A leader with extensive experience in demanding work environments and a proven ability to prioritize business needs, then implement creative solutions. Consistently demonstrates a passion to exceed organizational goals by improving customer satisfaction, improving quality and reducing cost.

I am an Multi Skilled Engineer Currently working at Road Development Authority, Sri Lanka

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Hand and computer skills+designs, calculation and workshop drawings+site coordination

Project Management, Telecommunication

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Entry Level mechanical engineer

QS/ISO 9000, FMEA/ Control Plan/PPAP

Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,

Planning & Coordination Engineer

I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Electrical, Instrumentation, SCADA

DCS Engineer working on power and oil & gas facilities

7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.

Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.

Service Support/ Product Support Heavy Equipment Maintenance Manager

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

I am a recent graduate mining engineer that possesses the following skills: analyzing complex numerical information, working enthusiastically and productively under pressure, dealing professionally with teammates, and working efficiently in a variety of teams and on my own initiative.

Civil-water resources-water distributtion- pipe - sewer design-hdrology-awards-high computer skills

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc

QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector

Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.

Have been in the power plant industry for over 20 years, gas, steam, simple cycle, combined cycle, A10s, Frame 7FA, Frame 5 L&M

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation

Chemical Engineer from Indian Institute of Technology(IIT)-Delhi

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Chemical Engineer with Environmental Engineering experience

Results Driven Project Manager w/16yrs Industry Experience. Master of Civil Engineering/BSc Petroleum Engineering/Certified PMP/EPC Management/AFE Management/Contracts Review/Risk Analysis/Global Client Experience/Global Team Development: Lead by insistence on personal accountability and growth.

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

Senior Mechanical Engineer, Bachelor Of Engineering

I write to you seeking QA/QC Engineer’s position ( NACE Level II Sr. Coating Inspector & NACE Corrosion Technician ), which can utilise my experience in Quality Assurance, Quality Control and Operations field in coating Industry. In this context, I enclose my resume for your consideration.

Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

Cwi/QA/QC Manager

Bachelor of Mechanical Engineer, TWI Certified CSWIP 3.2, AWS certified CWI, Level II in MT, PT, RT, UT and ISO 9000-2000 Certified Lead Auditor.

Operations Manager or Shift Supervisor in a Power Plant

Rigging/Heavy Lift And Transport

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out