Resume - Electrical Engineer, Six Sigma, Lean, Manufacturing

Misco Jobs

Resume #72578

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Secure a challenging position that utilises my background in engineering and provides career development.

EDUCATION
* M. S in Electrical Engineering at Illinois Institute of Technology, Chicago.
* B. S in Electronics and Communication Engineering at C. U. Shah Engineering College, India. June- 2006

WORK EXPERIENCE
GE Appliances, Design Co-op Jan 2008 – Present
* New Product Introduction (NPI) Team: Designed a griddle Temperature algorithm for newly implemented function in Free Standing Electric (FSE09) Model.
* Used Data acquisition software & Hardware to collect the test Temperature data performed on Griddle.
* Reworked Harnesses to keep the FSE09 unit keep running & collected different test data for reliability & safety.
* Flashed FSE09 unit with latest version of software to keep the unit updated with design.
* Platform Team: Worked with the manufacturing engineers and responsible for updating CAD Drawing as redesigned dimensions and also responsible for measurements requirement for new Design.
* Gained experience with Six-Sigma, Lean methodology and GE E-Engineering systems.

Illinois Institute of Technology, Internet Media Developer Aug 2007 – Dec 2007
* Created high quality images for use in course materials. Used XML, HTML, PowerPoint, Photoshop, Flash, Premiere and other necessary tools to author and synchronize course videos and notes.

ACADEMIC EXPERIENCE
Designed and synthesized an 4 bit Adder for power Analysis using 45nm Technology, spring 2008
* Designed Adder circuit using cadence tools for three different implementation i.e. low threshold voltages, Dual Threshold, sleep Switch & simulated using HSPICE, Nanosim to compare power consumption.

In-depth Investigation of TCP via NS2 Simulation, spring - 2007
* Developed a network with 6 nodes and 5 links using NS2 'Tcl' scripts in Cygwin & Demonstrated TCP's efficiency in congestion control, flow control and reliable data transfer for various flavors of TCP using NS2 simulation.

Designed and synthesized an 8 bit Pipelined CPU, spring 2007
* Designed a code for 8-bit Pipelined CPU using Verilog. Layout was made in Magic using Synopsys and Place Route with Silicon Ensemble from Cadence.
* The testing of the layout was done for functionality and delay information using Hspice. The combined circuit simulation result was simulated in simvision.

SKILLS
* Simulation: Cadence, Magic, Sue, Hspice, NANOSIM, Electronic Work Bench, MATLAB, and NS2.
* Programming Languages: C, C (Parallel & Serial Port Programming) BASIC, Verilog, MASM (8086 Assembly Language), Max+plus-2, 8051 IDE (8051 Assembly Language), PL/SQL and SQL.
* Applications: MS Office, LAN and WAN.
* Protocols: FTP, HTTP, TCP/IP, UDP, 802.11, SMTP, IMAP and POP3.
* Wireless Technology: GSM, GPRS, CDMA and UMTS.

ACTIVITIES
* Certified as a "Microsoft Certified Professional (MCP)" at the age of 15.
* IEEE Student chapter – Chair Person in college.
* INNOVATION – Among the three people group that handles the project Competition for National level technical symposium attended by over 500 students.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 2820)

Go to Search Parameters...

Brief Description

A Mechanical Engineer and an MBA with years of progressive experience in in commissioning, procurement and project engineering of power plant renovation & modernization contracts

Mechanical Engineer with over 7 years experience in QA/QC of mechanical construction activities, Welding, Painting, NDT, Insulation, Implementing QA/QC procedures, Auditing

Maintenance Manager Engineer Middle East Experience, Looking for work in UAE

Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

I have an overall experience of 17 years out of which 11 years in Oil & Gas Development Projects. Presently I am working as Group Project Engineer in a Major British Exploration & Production Company in Edinburgh UK. Following are my current responsibilities:

Handling key customers like Saudi Aramco, Sabic Affiliates, Saudi Electricity Company, Saline Water Conversion Corporation, etc in the western region of Saudi Arabia related to Sealing Solutions.

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

BS in Mechanical Engineering from India, 36 years of Petrochemical industrial Experience in NDT & Vibration analyses field.

To obtain a Full Time position as an Electrical/ Hardware Engineer.

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

Project control engineer with experience in planning and cost engineerig fields.

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Expertise in Project Engineering, Cadd Management & related fields.

Fully experienced HSE Coordinator,Supervisor,Advisor comfortable in Oil&Gas,Construction and Military environments

ELECTRICAL ENGINEER

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Lead construction engineer (structural, methods, lifting, marine)

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Electrical Engineer, Six Sigma, Lean, Manufacturing

33 years Mechanical & Civil Exp in QA/QC & Construction Management form$65.Million to $3.2 Million Projects. EXP. All Codes , ASME, B31.1 B31.3 AWS, , NBIC, ASME Sec.V, ASME Sec.VIII API-650 &653. Develope & writing QA/QC Programs, Site procedures Manuals, Project exection plans & Welding plans

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

More than 20 years E&I experience of Maintenance & Commissioning within the Oil & Gas Industry. Enjoy working as part of a team but I can also operate independently when required. Self-motivated, resourceful, adapt quickly to new working environments, easily integrate into multi-cultural operations

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Buyer, Purchasing Agent, 38 Yrs. Material Handling and Purchasing Experience

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Seven years experience in quality control and quality assurance, welding inspection, Nondestructive tests (RT, UT, PT& MT),destructive tests (tensile,bend,hardness, macroscopic, impact, corrosion,...), in the fields of (Pressure Vessels,Boilers,piping, steel structure , tanks & Pipelines) at gas &

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Quantity surveyor, estimation and land surveying works

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Civil engineer having knowlegde and working exposure of AutoCad 2000 and Staad 2004

Construction Project Manager, Property Development Manager

Electrical and Instrumentation Technician/Engineer with significant experience in Construction, HUC and Maintenance in the Petrochemical and Oil & Gas Industries at Technician or Engineer levels for companies with several large development projects ongoing at once.

Self-motivated Draftsman proficient in AutoCAD and manual drafting with 750 hours of theory and 750 hours of hands on experience. Eager to contribute time and effort to benefit a respectable company. Responsible, hardworking and dependable.

Engineering/Operations professional with sixteen (16) years of experience managing multi-disciplined projects.

having 5 years experence by using cad tools such as proe catia associated with automotive\offhighway industries

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out