Resume - I have over 20 years experience working in construction. Certified in many areas...

Misco Jobs

Resume #72816

CONTACT INFORMATION:
View contact information...

OBJECTIVE To obtain a challenging and responsible position with a reputable company which will utilize my education, abilities and knowledge.

QUALIFICATIONS 1983-2008
MATERIALS TESTING TECHNICIAN/CIVIL ENGINEERING INSPECTOR
ACNM / NMSH&TD, TTCP, ASTM, ACI and Texas Highway Department inspection and testing procedures for concrete, soils and general construction including inspection and data logging. Proficiencies include both laboratory and field technique and report writing.

WORK HISTORY
2007-2008 Foster CM Group San Antonio, Texas
Field Inspector
(City of San Antonio Projects)

As a Field Inspector, I conducted inspection of construction materials, grade elevation, concrete structures and construction safety precautions. I photographed and documented the condiiton of existing property that might be damaged by the work and ensured all existing structures, properties, utilities and landscaping were properly protected.Prepared daily logs and reports. Maintained records of inspections made,tests performed and work executed.

2007 Fluor Salem, Oregon
Senior Construction Inspector
(Oregon Bridge Developing Partners) I-5 Project

As Senior Inspector, I reviewed construction plans,specifications,encroachments permits and other plans affecting assigned projects. Meets and discusses construction details and problems with contractors and other agencies. Conducts inspections of construction materials, grade elevation, construction safety precautions, concrete structures, and erosion and siltation control installations to determine compliance with contract plans and specifications, and with city and other governmental regulations. Made field measurements of quantities in place. Prepared and monitored the correction of project deficiencies. Coordinate materials testing and construction survey activities. Identifies and recommends the approval of necessary contract and/or design adjustments to accommodate field conditions. Approved field adjustments. Evaluates work in progress for compliance with safety standards. Rejected cement trucks during construction work. Maintained daily diary and field records of materials and quantities used. Calculated and recommended formal approval of appropriate progress payments to contractors for work completed.

2004-2007
Bridge Inspector Aerotek AUSTIN,TEXAS
State Highway/Toll Road 130 Project

As a Bridge Inspector, I inspected bridge structures to determine if hazards to the health, safety and welfare of the public are present. Maintain current bridge inventory data for use by local, state and federal officials to allocate resources for bridge.I inspected bolts on a skidmoore for elongation and the rotational capacity to make sure bolts have their proper torque,lubrication and there was no rust on the bolts. We used a chart to determine the elongation, and the damage to threads on bolts. The method used was turn of the nut witch depended on the length of bolts. Schedules and performs inspections to bring all bridges into compliance with state and federal mandates for bridge inspections.Monitor the duties of equipment operators and traffic control personnel to safely, efficiently and thoroughly conduct the inspection procedures.

2003-2004 Palmetto Bridge Construction CHARLESTON,SOUTH CAROLINA
QC Inspector
Cooper River Bridge Project

As a QC Inspector, I monitored and inspected concrete for piers, columns, caps for specification conformance including reinforcing steel inspections, and post-tensioning of steel tendons and the sampling of concrete ready mix placement. I inspected bolts on a skidmoore for elongation and the rotational capacity to make sure bolts have their proper torque,and lubrication and there was no rust on the bolts. We used a chart to determine elongation, and damage to threads on bolts. The method used was turn of the nut witch depended on the length of bolts. My duties also included the breaking of cylinders the marking, and storage of cylinders.

2002-2003 BALFOUR BEATTY BEAUFORT,SOUTHCAROLINA
QA/QC Inspector
SC 170 Bridge Project

As QA/QC inspector I monitored and inspected concrete and soils for moister by running a one point on soils with the use of a speedy moister, and matching the curve on the family of curves, I also did reinforcing steel inspections on columns, and caps for the Chechessee River Bridge and the Broad River Bridge. I inspected the concrete for the water to cement ratios in the field prior to contractor adding water. Duties also included geotechnical laboratory work and environmental engineering we worked off of barges under the bridge and made sure that no concrete fell into water or petroleum products contaminated the water. I inspected the job for the silt fence placement, and maintance of silt fence for erosion protection.

2001-2002 VINYARD AND ASSOC. ALBUQUERQUE, New Mexico
MATERIALS TESTING TECHNICIAN

As a technician I monitored and inspected concrete and asphalt specification conformance including reinforced steel, geotechnical sampling, inspection and testing and concrete ready mix placement and sampling. Duties also included sampling and inspection of various private and commercial construction projects.

2000-2001 Flatiron Structures Cuba, New Mexico
Field Inspector
Highway 44 Project

As a field inspector I monitored and inspected concrete and soils specification conformance including reinforced steel, geotechnical sampling, inspection and testing and concrete ready mix placement and sampling. I have knowledge of the operation and safety requirements of the Nuclear Density gauge. Duties also included geotechnical laboratory work.Good ability to: make accurate engineering calculations and draft neat geometric diagrams; inspect construction work for compliance with contract documents; analyze situations accurately and adopt an effective course of action; prepare comprehensive technical reports.

1999-2000 PSI San Antonio, Texas
Materials Testing Technician

As a technician, I have knowledge of: the operation and safety requirements of nuclear density gauges, the physical properties and characteristics of materials, methods, tools, and equipment.Approved methods and equipment use in the physical testing of such materials. Good ability to inspect construction work for compliance with contract documents; analyze situations accurately and adopt an effective course of action.Tested various private and commercial construction projects.

1998-1999 HBC-Engineering Austin, Texas
Materials Testing Technician

As a field technician I monitored and inspected concrete and asphalt specification conformance including reinforced steel, geotechnical sampling, inspection and testing and concrete ready mix placement and sampling. Duties also included sampling and inspection of various private and commercial construction projects.

1994-1998 Texas Tool Makers. Inc. San Antonio, Texas
Environmental &General Maintenance Technician

As a shop technician I performed general shop maintenance on tool equipment and inspected equipment for wear tolerances and faults including conformance to technical specification.

1993-1994 Morrison Knudsen Corporation San Antonio, Texas
Quality Control Engineer

Assigned to the United States Department of Energy Uranium Mill Tailings Remedial Action (UMTRA) Project for the cleanup of Uranium mill tailings. Duties include inspection, hazardous waste monitoring, report generation and calibration of field and laboratory equipment.

1986-1988 Prescon Corporation San Antonio, Texas
Concrete Technician

As a concrete technician I monitored and inspected concrete for specification conformance including reinforce steel, pre-tension and post-tensioning of steel tendons and concrete ready mix placement and sampling.

1983-1984 Fru-Con Construction San Antonio, Texas
Concrete Testing Technician

As a concrete technician I monitored and inspected concrete for specification conformance including reinforce steel and concrete ready mix placement and sampling.

Education
1985 GED Arkansas

Accreditations

TTCP Soils
TTCP Concrete
TTCP Aggregate
Level I NQA-1 Civils/Soils
Level I NQA-1 Concrete
40-hr Hazmat (expired)
Radiation Worker Certification Level II (expired)
Troxler Nuclear Gauge Certificate
Soil Technician Certificate (NM)
Aggregate Technician Certificate (NM)
ACI Certificate-International
S.C. Asphalt Roadway Technician
S.C. Earthwork, Drainage & Base Inspector

Profile: Organized, confident, adaptable, perceptive, well disciplined, structured, dedicated, knowledgeable, motivated, attentive, communicative.

Language: English, Spanish, and Sign Language.

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 2814)

Go to Search Parameters...

Brief Description

I have 12 years of experience in different Civil Construction project such as Container Terminal with Jetties, Heavy Industry, Cement Factory, Textile Mill, High Rise Building etc. During my service period I was responsible for Preparation of Tender, Tendering, Supervision, Planning, Estimating etc.

Young Geotechnical Engineer with 9 years exp., well versed with the latest Engineering Softwares being used in the industry.

Structural design and supervision

Graduate engineer with more than 11 yrs of experience in inspection of fabricated equipments

I did M.tech in Structural Engineering and i have the knowledge of STAAD-Pro2003,AutoCad2004,MSofficeetc.

Objective Seeking to advance my professional career in the international arena of constructionmanagement. Open for relocation to most any international project.

Experienced in surveying, pipeline works and under ground tunnels. Have total 19 years experience.

HSE Manager, specializing in Oil and Gas Plant Construction, adaptable person with extensive travel and international experience. I am ambitious, aggressive, multilingual and entrepreneurial.

Piping supervisor , pipeline supervisor, formen piping and pipeline

I have over 20 years experience working in construction. Certified in many areas. Able to read blueprints, computer knowledge, and have done pay notes.

P3, MS Project, MS office Applications, High Rise buildings. 9.8 yrs Exp

Experienced in Pressure vessels, Piping, Pipelines (onshore & offshore), Offshore structures such as jackets & deck, buoys, turrets, PLEMS etc., Storage tanks, etc. for major oil/gas, petrochemical, fertilizer and power sector companies involving materials.

Safety looking for construction employment ready to travel

Gas turbine repair coating blade vane nozzle hot gas path corrosion oxidation

I am having a three year associate engineer diploma in electrical and i have eleven years experience inconstruction of oil refiniry, power plant, gass plat, petrochamical plant, fertilizer plant and cement factory in gulf and my own country. I worked in a epc base good multination company.

I am a Mechanical Engineer and having in depth expertise of over 11 years’ in Technical sales ,Project Management, Design Engineering, and Erection/Commission etc.Demonstrated abilities in implementing strategies for augmenting business, identifying and penetrating new market segments.

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

I am a n Electrical bachelor degree holder having 9 years of experience in erection of various electrical equipments

More than 20 years of professional engineering practice. Solid background in all aspects of building construction including design, inspection, fabrication, erection, estimating and detailing. Involved in major construction works like hospitals, office, commercial, industrial, petro-chem plants.

Having 15 years of experience in Geology Industry

project manager,bridge engineer,cost/quantity engineer,resident engineer

B-Tech in mechanical engineering, 11 years experience

Bachelor of Engineering Batch 1978 From Punjab Engineering College – Chandigarh – India.

I am a registered Civil Engineer with extensive experience in field and office engineering work who can work under pressure with minimum supervision . . .

Naval architectural & marine structural engineering design with cad skill and experences

Skill: ArcView GIS +AutoCAD-2002, M.A.in Geography and Post Graduate Diploma in Remote Sensing and GIS

Excellent in using computer, Microsoft Office , Auto CAD, Synchro and Sim Traffic, and LDD

Experience of over 18 years in Civil Engineering - Road, Building & Railway works i.e., Topographical Survey, Estimation (Quantity Survey), Planning, Preparation of Drawings/ Reports

Objective To work in an environment that promotes technical progression with influence of teamwork through constant communication and support.

I am a Degree Qualified Civil Engineer with 12 years of experience as in utility industry. I have more than 6 years experienced as GIS Utility Specialist/ Engineer in major companies like, Nakheel, TRANSCO (Abu Dhabi Water & Electricity), GISTEC and Khatib & Alami. I had worked with Contractors, Con

Internationally-trained Architect with over nine years experience in industrial, residential and commercial buildings design. Specialist in Oil & Gas, Petrochemical and heavy Industerial buildings.

Project \Contracts Engineering professional with 17 years of multi faceted experience in Projects\ Planning\Budgeting\Costing\Execution\Construction\Production\Logistics\Global Procurement with commercial knowledge.

Electrical engineer with more than 14 years experience in electrical construction, supervision of contractors, project management, with vast knowledge also about mechanical systems (pumps, tanks, cooling equipments etc.)

A dedicated highways engineer with 18 years of professional experience in the Asia and Middle East;

Working 18 years with multinational companies of Power Sector (includes related Water & Waste Water treatment and Oil & Gas systems). Now working as Site Representative (Manager)and reporting directly to Project Director. See the CV

BGAS-CSWIP Grade 2 Certified Painting Inspector with 11 Years work experience of Inspection & Supervision in the Industrial Coatings.

I had passed out with a Diploma in Civil Engg. Since 11.5 years I am working as a Quantity Surveyor on various infrastructure projects, presently I am working on Dubai International Airport Construction project as a Senior Quantity Surveyor.

Seeking position as…Welding Engineer/Welding Inspector Leveraging an experienced track record for improving company performance and profitability.

Qualified civil engineer with varied experience in construction industry ranging from Bridges, Highways, Infrastructure, Utility Services and Building structures. Seeks position in a well reputed establishment as a Senior Quantity Surveyor. Available from 22-10-2006

Current position: Senior QA/QC Engineer and Senior Project Engineer ( Civil Infrastructures ), Through knowledge of Qatar Petroleum (QP) standards , policies and procedures.Over 19 years of experience with reputable consulting and contracting firms in Qatar, Dubai, and Jordan

20 Years experience in Architectural, Structural detailing, Interior designing, Quantity Serveying & Shop drawing etc. Specialized in fillar slab (Italian technology). Operate Auto Cad, 3dstudio max and Photoshop

Primavera Project Planner (3) and Primavera Expedition Courses PPL Tehran Iran

Extensive experience in Quantity Surveying/Estimating in diverse environments. I relish undertaking challenging assignments and desire to lead a project to successful fruition. Firmly believe that my involvement in any assignment will add value to the project

Civil Engineer / Contract Engineer

Solid background in Mechanical Engineering. Three Years Design, Four Years Operations, Five Years Construction, Five Years Consulting, Five years Management. Experience in Mining, Oil, Pulp & Paperand Electrical Generating Industries.

Senior Project Manager

Experience Safety Engineer in Construction Industry

catia v4 designer

Instrument fitter

Seeking to apply my skills as a Planning & Scheduling Manager; QA/QC manager; Document Control Manager; Assistant Project Manager; Superintendent; Consultant. Great organizational and computer skills. MS Office, Excel, Word, MS Project, P3, Project Manager, and more.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out