Resume - The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder...

Misco Jobs

Resume #72852

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

May' 2008 – Present
PRODUCTION SERVICES NETWORK – Melbourne
ESSO TURRUM PHASE II – MARLIN A AND WEST TUNA OFFSHORE PROJECT
Sr. Piping / Mechanical Designer/Checker - 3D Model PDMS Plant.
Project Assignment: ESSO Offshore Brownfield Modification Project – Bass strait (East Melbourne).
Exon mobil oil Offshore Partner.
# Produce plot plan, equipment layout and piping plans. Identify technical conflicts in layout design, coordinate with other engineering disciplines on solutions of technical irregularities.
# Prepare layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel. Identify layout feasibility, resolve design irregularities, prepare isometric drawings for stress analysis, provide stress and piping loads for civil engineering.
# Review the Technical Document Register (TDR), evaluate scope of work, number of required drawings and establish design and drafting requirements.
# Check and Revised Pipe Support Detail Platform Marlin A dwg.
# Check and Revised Isometric dwg.
# Check and Revised MTO list.
# Check and Revised P&ID dwg.
# Check and Revised TIE-IN List.
# Check and Revised Line list Index dwg.
# Check and Modified Piping Demolished dwg.
# Prepared and Modified Piping Model on Main, Cellar and subcellar Deck area.
# Prepared and Modified Equipment Model on Cellar Deck area.
# Prepared and Modified Existing Piping Model clashed as per Photogrammetry.

August' 2007 – March' 2008
Foster Wheeler Melaka - Malaysia
PSR2 Revamp Project - PETRONAS
Sr. Piping / Mechanical Designer/Checker PDMS/ Microstation V8
Project Assignment: PETRONAS - PSR2 Revamp Project.

# Check and Revised Piping GA Plant Unit 29 Distillate Hydro treater.
# Check and Revised Piping Isometric Unit-29.
# Site visit for Modification and demolish Piping and equipment unit-29.
# Check and Revised Piping GA Plant Unit 30 Hydro cracker.
# Site visit for Modification and demolish Piping and equipment unit-30.
# Check and Revised Pipe Rack Unit 30.
# Check and Revised Plot Plan Unit-29.
# Check and Revised Plot Plan Unit-30.
# Prepared and design Pipe Support Detail.
# Prepare MTO Piping.
# Prepare and Revise Demolishing dwg.

March' 2007 – August' 2007
Fabricom Stavanger - Norway
Ekofisk Area Growth 2/4M Wellhead & Process Platform
Sr. Piping / Mechanical Designer/Checker - 3D Model Plant PDMS/Microstation.
Project Assignment: ConocoPhillips Offshore - Greater Ekofisk Modification 2 Project – Norway.
Aker Kvaerner Offshore Partner.
# Check and Revised Pipe Support Detail Platform EKO-M and EKO-K Dwg.
# Check and Revised Isometric for Platform EKO-M and EKO-K Dwg.
# Check and Revised MTO for Platform EKO-M and EKO-K Dwg.
# Prepared and Designed Modification Piping Model Platform EKO-K and EKO-M.
# Prepared and Designed Modification Pipe Support Model Platform for Area EKO-K and EKO-M.
# Update 3D model with comments from offshore and comments on master file. Make sure all connections are ok and that there are no datacon errors in line.
# Extract new isometrics with all sheets from line included. Update isometrics in microstation.
# Make sure all pipe and supports are created according to requirements from stress calculations.
# Update support drawing to as-built status with information from red-line mark up and master file.

March' 2005 – March' 2007
WorleyParsons Services Pty Ltd
Hydrocarbon Pipeline Terminal Project
Sr. Piping / Mechanical Designer - 3D Model Plant PDMS/Autoplant.
Angel Offshore (FEED) – Project.
Alinta Pipeline Gas Expansion Project – Western Australia.
DBNG PIPE LINE STAGE 4B AND STAGE 5A EXPANSION PROJECT – Austrralia.
* Prepared & design for 3D Model plant - New Compressor Station area Dwg.
* Prepare drawings related to piping and general mechanical equipment including: layout drawings, general arrangement drawings, process and instrument diagrams, piping isometric drawings, and other drawings and sketches.
* Prepare drawing lists, equipment lists, line lists, valve lists, instrument lists, cable schedules, motor lists, load lists, and other lists and schedules which must be relevant quality system procedure.
* Design & Revised for GA Site Plan Dwg.
* Prepared Tie-in New Compressor area Unit to existing Pipe Line.
* Ensure drawings are checked, approved and filed in accordance with the relevant quality system procedure.
* Prepare drafting-related calculations as required for area of assignment, and have them checked, approved and filed in line with the relevant quality system procedure.
* Prepared Pipe Rack Site Plant Dwg.
* Design & Revised for Piping Tie-In Site Plan Dwg.
* Prepared & design for 3D Model Compressor Equipment Dwg
* Checked & Revised Piping 3D Model Plant - Clash Check (Rebis Explorer)
* Checked & Revised P&I D Dwg.
* Make MTO Piping Report.
* Checked & Revised for Pipe Support Standard dwg.
* Design 3D Model – Fuel Gas Skid Dw.
* Checked & Revised Piping Isometric Dwg.
* AS BUILT DWG.

June' 2004 – Oct' 2004
Technip - Abudhabi
Piping and Mechanical Checker / Designer – PDMS/PDS
Rumaitha, Al Dabb'iya & CPP – NEB ADCO Project

* Checked Piping 3d Model Plant Dwg (SPR Model Check).
* Checked & Revised Gas/Oil Production Manifold Dia 8",10" & 12" to CPP Pipe line
* SPR Clash Check for 3D Model Manifold & Mechanical Dwg.
* Checked & Revised Piping Isometric Dwg.
* Checked & Revised P&I D Punch List Dwg.
* Checked Piping Clash with SPR Model Plant.
* Checked & Revised for all Pipe Supports Dwg.
* Checked & Revised for Mechanical Detail Dwg.
* Checked & Revised for General Piping Plant dwg.
* Make Summary report of Isometric Progress.
* Check & Revised Piping Under Ground Utility dwg.

July' 2003 – June' 2004
PetroChina Intl. - Companies in Indonesia
Senior Piping Designer / Checker - PDMS/PDS/Autoplant.
Betara Complex Development Project.

* Prepared Piping 3d Model Plant Dwg.
* Prepared shop fabrication Dia 10", 12" Gas/Oil Production Manifold standard Dwg.
* Prepared 3d Model Plant Dwg.
* Prepared Piping Isoplant Dwg.
* Prepared Piping Isometric Dwg.
* Prepared Tie-in Point Piping 3d Model Plant Dwg.
* Prepared 3d Model for Mechanical Detail Dwg.
* As-built Piping Plant Dwg.
* Supervised Piping construction area plant.
* MTO List Dwg.
* Modified Material Data Spec and Catalog.
* Checked & Revised 3D Model Mechanical Dwg.

Dec' 2002 – June' 2003
PT. Ceria Worley
Senior Piping Designer – Autoplant/PDMS.
Kerisi Wellhead (WHP-K), Hiu and CPP Platform Project

* Prepared Piping 3d Modules Kerisi Platform Preliminary Dwg.
* Prepared 3D Piping/Mechanical Model for Kerisi Platform Dwg.
* Prepared 3D Model for Oil/Gas Production Manifold at WHP & CPP Platform Dwg.
* Prepared 3D Model for HIU, WHP-K AND CPP Platform Dwg.
* Prepared 3D Model for Piping Hook-up Platform Dwg.
* Prepared Piping GA for HIU, WHP-K AND CPP Platform Dwg.
* Prepared Piping Access safety layout Platform Dwg.
* Prepared Bill Of Material (general report) of Piping GA Dwg.
* Clash Check for Piping 3D Model Dwg.
* Prepared / Designed Isometric dwg.
* Prepared Pipe support standard dwg.

Apr' 2002 – Dec' 2002
PT. Enerkon Engineers and Contractors
Piping Designer – Autoplant/PDMS
LPG and Sulfur Recovery Project – Pertamina
Cilacap Refinery - Indonesia

* Prepared Plot Plant Dwg Area 90.
* Prepared Piping Plant Tie-In Point (Existing).
* Check & Revised for Gas/Oil Production Manifold dwg.
* Prepared Pipe Rack plant Dwg Area 90, 91, 91, 92, 93, 94 & 95.
* Prepared Fire Water Plant Dwg.
* Prepared Nozzle Orientation for Mechanical Dwg.
* Make M T O.
* Prepared Tie-in Hot Tap Point From Existing Line to New SRU.
* Supervised and Line check Unit Plant Area.

* As-built Drawing.
4
Oct' 2001 – Apr' 2002
PT. Enerkon Engineers and Contractors
Piping Designer – Autoplant / Microstation/PDMS.
Caltex Project
Gathering Station 4,5 & 6 – Caltex

* Design & Revision P&ID New Wash Tank area Dwg.
* Design & Revision P&ID Existing Oil/Gas Manifold Dwg.
* Design & Revision P&ID Shipping Tank area Dwg.
* Design & Revision P&ID New clarifier Tank area Dwg.
* Design & Revision P&ID Existing clarifier Tank area Dwg.
* Design & Revision P&ID New water Injection area Dwg.
* Design & Revision P&ID Existing water Injection area Dwg.
* Design & Revision P&ID water Injection & Gas Handling
* Facilities Dwg.
* Design & Revision P&ID On Skid CBE Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid AWE#1 Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid AWE#2 Gas Compressor
* Plant Dwg.
* Design & Revision P&ID On Skid Compressor Liquid Handling Facilities Dwg.
* Design & Revision P&ID Vapor Recovery System Dwg.
* Design & Revision P&ID Mechanical Flotation unit Area Water Treating Facilities – Losf Area-1 Dwg.
* Design & Revision P&ID Filter & Water Softener Water Treating Plant - Losf Area-1 Dwg.
* Design & Revision P&ID Feed Water Tank Water Treating Plant –Losf Area-1 Dwg.
* Design & Revision P&ID Brine Facility – Losf Area-1 Dwg.
* Punch list plant area / line checker for all piping & instrumentation unit.
* Validation Plant Area Recheck for all Piping & Instrument unit As per Gathering Station Area.

Feb' 2001 – Oct' 2001
PT. Tripatra Engineering
Piping Designer – PDS/ Microstation
Four Pile Drilling and Production Platform
Serang "SA" Facilities Upgrade

* Draft & Revision piping plant above access platform produce water system and reject oil pumps area Dwg.
* Draft & Revision piping plant below cellar deck
* IP separator area Dwg.
* Draft & Revision piping plant upper level
* Draft & Revision piping plant above cellar deck
* Draft & Revision piping sections & details Dwg.
* Draft & Revision piping plant upper Gas compressor inlet / after cooler area Dwg.
* Draft & Revision piping plant above cellar deck Gas compressor inlet / after cooler area Dwg.
* Draft & Revision piping plant above cellar deck Gas compressor area Dwg.
* Draft & Revision isometric Dwg.
* Draft & Revision pipe supports Dwg.
* Draft & Revision piping plant & section Dwg.
* Draft & Revision Gas/Oil Manifold Standard Dwg.
* Draft & Revision P & ID Dwg.
* Draft & Revision PFD Dwg.
* As-built Drawing.

Feb' 2000 – Dec' 2000
PT. Multi Structure Engineer
Piping and Civil Structure Designer – Autoplant.
Thames PAM Jaya Project

* Prepared drawing layout for pipe situation.
* Material take off.
* Design pipe bridge & steel details.
* Line check area.
* Design & checker all shop drawing.
* Drafting and revision piping plant drawing.
* As-built drawing.

Oct' 97 – Feb' 2000
PT. Petrosea
Piping Designer – CAD/Microstation.
Inco Expansion Project
Fourth Exp. Project
* Prepared shop fabrication dwg, for all pipe supports
* Prepared shop fabrication for Oil/Gas Manifold & Mechanical dwg.
* Prepared isometric drawing, from piping plant drawing.
* Prepared isometric drawing, for all small bore pipe
* Checker piping plant drawing.
* Checker Isometric dwg.
* Draft & revision fire water system for conveyor belt drawing.
* Make summary data for all pipe support.
* Make registered dwg for all pipe supports.
* Make punch list of Isometric drawing.
* Make punch list of piping plant drawing.
* As built drawing for all piping plant drawings.
* As built drawing for all isometric small bore drawings.
* Make technical query of pipe support drawings.
* Make technical query of piping plant drawings.
* Make technical query of isometric drawings.
* Make summary report for all pipe support drawings.
* Punch list plant area / line checker.
* As-built Drawings.

Apr' 97 – Sept' 97
PT. Hardy & Kee Engineering
Field Engineer
PT. IKPT – Bontang ( Train 'G' )
Expansion Train 'G' – LNG Plant Project

* Line checker plant area.
* Punch list plant area.
* Prepared shop Fabrication for Gas/Oil Manifold & Mechanical dwg.
* Supervised construction plant area.
* Material take off..
* Prepared Pipe support.
* Prepared Isometric drawing.
* As built Piping plant drawing.
* As built Isometric drawing.
* As built Pipe support drawing.
* Checked piping plant drawing.
* Checked isometric drawing.
* Make technical query of pipe support drawings.
* Make technical query of pipe plant drawings.
* Make summary report for all pipe support drawings.
* Make summary data for all pipe support.
* Supervised for leak test.
* Supervised construction plant area.
* Supervised blow down test.
* Supervised hydro testing pipe.
* Supervised Pressured test pipe.
* Checker internal vessels & tanks.
* As-built Drawings.

July' 95 – Apr' 97
PT. Polysindo Eka Perkasa II
Senior Piping / Mechanical CAD Drafter
PT. PEP II Plant Karawang Project

* Drafted piping plant drawings.
* Drafted piping isometric drawings.
* Drafted piping layout drawings.
* Drafted plot plant drawings.
* Drafted silo tank drawings.
* Drafted vessels & tank drawings.
* Drafted P & ID drawings.
* Drafted flow instrument diagram drawings.
* Data entry material.
* Material take off.
* Punch list piping plant drawings.
* Punch list isometric drawings.
* Line checker plant area.
* As-built Drawings.

July' 94 – July' 95
PT. Moeladi
Piping Designer
LPG Recovery Plant Project

* Prepared piping lay out drawings.
* Prepared piping plant drawings.
* Prepared piping isometric drawings.
* Prepared shop fabrication for Gas/Oil Manifold drawings.
* Prepared material of piping.
* As-built Drawings.
* Drafted Layout of lighting electrical drawings.
* Drafted Layout of electrical grounding cable drawings.
* M T O.
* Supervised construction plant area.
* Line checker plant area.
* Witness.
* Prepared Hydro testing pipe.
* Checker internal piping / mechanical.
* Supervised blow down and leak test.
* Inspection plant area.
* As-built Drawings.

Apr' 92 – Mart' 94
PT. Wira Matra Guna Engineering
CAD Drafter
Expr II Project Balongan (Arco Project)

* Drafted piping plant drawings.
* Drafted Mechanical & Oil/Gas production Manifold dwg.
* Drafted piping isometric drawings.
* Drafted piping layout drawings.
* Drafted piping spool fabrication drawings.
* Drafted piping support drawings.
* Make M T O.
* Punch list drawings.
* As-built drawings.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 2819)

Go to Search Parameters...

Brief Description

Instrument Construction, Comissioning of DCS & ESD

Civil Engineer With Project Management & Primavera, MS Project, Auto CAD & STAAD Skills

MBA, PMP Certified, PE(Texas), looking for a senior management position in a oil & gas company.

Design Engineer

Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

I am graduated civil Engineer, has worked in two countries (Nigeria and Pakistan) before. cv can be sent as attachment.

5 years of experience in the field of civil construction and Designing , Estimation of Under Ground Drainage system , Water supply distribution , feed mains, Storm water drain , Road and Drains. Presently working for M/s NCPE as project Engineer

14 MONTHS EXPERIENCE IN BELLELI SAUDI HEAVY INDUSTRIES, SAUDI ARABIA AS PRIMAVERA PLANNER. 5 YEARS EXPERIENCE IN RIYADH CABLES GROUP AS PLANNING ENGINEER

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

X-STEEL OPERATOR, DETAILING, CIVIL DRAFTSMAN

As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.

Electrical Engineer

7 yrs experience Generator Maintenance

I Have 4 years of exp in design of diesel engine power train components in reputed R&D AVL Technical center,Having good knowledge in PRo-e,got 1 year special training in Graz Austria on engine design

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

B.E. in Civil Engineering under Bangalore University from Ramaiah Institute Of Technology scoring a percentage of 71.85.(1995-1999)

Preparation of tender document, issuing tender, evaluation of tenders, submitting recommendation to tender committee for award of contract, preparation of contract document, administration of contract, corresponding with contractors on contractual matters, finalyzing variation PRPSL. from employer

An Civil Engineer with 9 years of experience in the oil & gas, infra structure, marine structure, pipeline and construction industry. Able to work on own initiative and part of a team, to provide full support to the project with regard to all civil construction aspects, in addition to the engineerin

I started my career as a structural engineer for more than 10 years. After some years on the field of Information Technology I want to go back to Civil Engineering. I prefer a position in Northern NJ or New York City, but I will consider relocation. I don’t mind some travel.

ZTE Pakistan (Pvt.) Limited: - Currently I am working as MSS Engineer in the O&M Team in the Telecard CDMA WLL Project .Installed & Commissioned ZTE ZXC-10 MSC, HLR..Operation & Maintenance of ZTE CDMA Network Elements like ZTE MSC, HLR and VLR.

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

I am a QA/QC Civil Eng. with experience in the Kuwaiti Oil Sector.

Application Manager - Control Valves and Engineered Products

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

10+ yrs experience in construction field with specialized in RCC structure & refractory material installation.

Completed Amusement and water Parks project in India and Bangladesh. I am Civil Engg. Diploma Holder. It is 3 year course.

Just I have graduated from Sheffield Hallam University in UK on October 2002 and looking for work opportunities throughout USA

I am a recent college graduate who majored in Civil Engineering Technology and is seeking the opportunity to gain experience, as an Entry Level Civil Engineer.

Engineer looking for job in construction industry in Los Angeles area.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

Site Safety

I have been doing civil drafting for an enigneering firm that does contracts for Texas Department of Highways and National Texas Toll Authority for a year now. I also work for the land development department and the surveyors. I have one year microstation experience in a job setting.

Configuration of Routing Protocols like RIP, IGRP, EIGRP, OSPF, BGP in Cisco routers.

As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Electrical Technician/Cell Phone Technician

Project Management

Mining engineer and experienced manager with over 20 years of successful executive management, project development, engineering, construction and operations experience in the mining, tunneling, fossil power, rail and heavy construction sectors.

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

Eight - year experience in Civil Engineering Projects.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out