Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #72999 next resume »»
CONTACT INFORMATION:
View contact information...

ELECTRONICS TECHNICIAN 4/2007 - 9/2007
Manpower Professional, Inc.
Manchester, CT

Contracted to Sonalysts, Inc. of Waterford, CT to perform testing of communications equipment used by US submarine fleet. Required extensive use of HP/Agilent signal generators/sweepers, scalar network analyzers, spectrum analyzers and standard lab test equipment.

ELECTRONICS TECHNICIAN III 2004 - 2006
JT3 LLC
Las Vegas, Nevada

Perform maintenance on fixed and mobile radar systems supporting extensive war-fighter training. Work details and locations are classified.

ELECTRONICS TECHNICIAN III 2003 - 2004
Raytheon Corp., Project AUTEC
Andros Island, The Bahamas

Maintain CATV and telephone systems at US Navy test site, perform installation and maintenance of HF, VHF and UHF radio equipment.

COMMUNICATIONS TECHNICIAN II 1994 - 2003
Vermont Department of Public Safety
Waterbury, Vermont

Provide programming, installation, bench and field maintenance of portable, mobile, marine, fixed base and repeater station radio equipment operating in the HF, VHF and UHF bands. Equipment serviced was primarily Motorola, GE/Ericsson and Kenwood.

Troubleshoot communications equipment to component level using specialized test equipment including DMMs, oscilloscopes, wattmeters, selective level meters, service monitors, and spectrum analyzers.

Maintain analog microwave transmitters and receivers, antennas and terminal equipment.

Design, construct and implement tone-signaling circuitry for radio control of remote repeaters and receiver voting equipment.

Design, construct and implement electronic circuits to enhance equipment performance using CMOS, OpAmp and TTL components.

Climb radio towers. Inspect and repair antennas, rigging, and coaxial cables.

Install, program and maintain multi-channel TDM radio dispatch consoles.

Assigned as technician/manager of field radio shop.

INSTRUMENTATION TECHNICIAN 1991 - 1992
Phoenix Engineering Inc., Newport, Vermont

Install, operate and maintain instrumentation for test firings of 155mm howitzer under development at Yuma Proving Ground, Arizona.

Supervise technicians in equipment preparation and data acquisition.
Design fixtures for calibration of sensors and transducers.

ELECTRONICS TECHNOLOGIST 1990
ATS Aerospace, Inc., St. Bruno, Quebec, Canada

Design high density, multi-layer printed-circuit boards and perform schematic capture using Microsoft and Orcad software.

Write technical maintenance literature with concentration on circuit theory and operation, prepare technical training program.

Perform field installation and testing of Air Traffic Control simulator at Civil Aviation Training Center in Southeast Asia in support of a
United Nations ICAO contract.

Train customer's technical staff in system hardware maintenance.

ELECTRONICS QUALITY CONTROL INSPECTOR 1983 - 1990
Triad Design Service Inc., Williston, Vermont

Primary electronics resource for company, with specific responsibility for checking CAD generated printed-circuit designs, schematics and technical documentation.

SENIOR ELECTRONICS TECHNICIAN 1968 - 1983
Space Research Corp., North Troy, Vermont/Christ Church, Barbados

Breadboard, troubleshoot and modify prototype analog, digital and RF circuits.

Construct, test and tune RF transmitters and modulators for use in data acquisition from howitzer-launched telemetry.

Evaluate prototype printed-circuit boards and incorporate engineering changes.

Install Air Traffic Control training equipment at Israeli civil and military sites; provide on-site system maintenance training.

EDUCATION

A.S. Degree in Electronics Technology: Community College of Vermont
U.S. Navy Sonar "A" and "C" Schools

CERTIFICATIONS AND LICENSES

TS/SSBI Security Clearance
FCC General Radiotelephone Operator's License (GROL) with Radar Endorsement
ISCET Certified Electronics Technician: Communications and Radar
Amateur Radio Licensee

View contact information...
«« previous resume next resume »»
Search Results (Resumes 51 to 100 of 2819)Go to Search Parameters...
Brief Description
Having 11 years of UAE experience in international consulting , contracting companies in the field of civil, infrastructures, interested to advance my career to utilise my skills and strength
Over 30 years of experience in manufacturing/quality control operations with rich exposure to Product Development, SCM, Quality Assurance & Profit Centre Operations
I am a Professional Engineer with broad experience in construction; field Inspecting, Managing and supervising different types of projects ranging from infrastructure, Residential, Industrial, Institutional and Commercial. Administered contracts, evaluating contract proposals, material procurement,
Navigational Aids System Engineer
all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.
Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.
My experience in the Middle East and Philippines has developed an expertise of Building Services
Knowledgeable and experienced Design Procedures with 15 years road construction experience
20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs
Supervise DCC team consists of 8 document controllers & operators.
Civil Marine, Dredging & Coastal Engineering. record: 70 projects
I am a highly experienced, qualified Safety Professional with an experience of 16 years at different countries like UAE, Qatar, India and Saudi Arabia.
Electrical Engineer Transmission Distribution Of Power Supply, DEsigns, Layouts., Operation & Maintenence of Grid substations upto 400 KV
I have worked as an Engineer in several developing countries in different kinds of work and environments. My responsabilities have involved coordination and optimization of various projects which were developed at the same time through accurate preparation and administration.
Project & Construction Manager
B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-
I have got masters degree & years of successful and practical experience in relevant fields such as lateral soil pressure, excavation, retaining wall, consolidation settlement, slope & embankment stability, and soft ground reinforcement & stabilisation.
MBA HRM, BS Mechanical with specialized associate degree in Fabrication
I can do research work on solid mechanics
I am having more than 15 years of experience in Project Planning, Scheduling & Project control for EPC projects of MNC companies
Electric Engineer
B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning
HND qualified UK educated Civil Engineer worked as freelance for many years and benefitted from the experience of many successful and poorly run contracts. Good liaison between all parties and understands the grass roots of operations and has high expectations. Can set out.
FCC General Class Radio-telephone Operator's (GROL) License, TS/SSBI Security Clearance,Electronics Troubleshooter, Experienced LMR Technician, Field Service, R&D.
Hydropower
Higher level civil management experience
Directing Large Engineering Teams.
VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.
Coordinates and controls project construction of continuous inspections of work progress for quality, workmanship and conformance with plans and specifications. Preparation of required concrete design Mix. Supervise the allotted laboratory programs to technicians. Prior inspection of Hollow core bed
I offer over twenty five years of professional employment and education in the civil engineering field. I have vast experience working with computers, horizontal and vertical concrete projects and managing multiple projects at the same time.
An interior designer, now in execution of interior fitout projects. Experiance of 14 years in 5 star hotels, restaurants, offices etc.
Diversified experience in Civil and Architectural engineering discipline gained in seventeen (17) years, from working with various international consulting and construction companies in the Philippines, Saudi Arabia and State of Qatar.
I am a qualified B.E (Civil) with over 18 years¡¦ of experience in Project Management,Site Administration, Construction Management. Over the years I have acquired all the necessary experience of working at all levels with client, consultants & main contractors. Deft in swiftly ramping up projects in
Above 14 years of worked experienced in Instrumentation and Electrical Control System overseas in a Reputable International Construction Companies. Supervision, Erection, QA/QC Inspection, Start-up, Commissioning and documentation works. Review Design and technical responsibilities for good quality,
Bachelor of Environmental Design (Architecture) Graduate Diploma Urban Design. Experience in Civil Engineering Road Concept design and masterplanning layouts, major retail development roads and car parking layouts. AutoCad Map 2008
A higly adaptable professional of proven ability with extensive on-site experience in worldwide locations who offers: construction and civil works expertise, safety and QA/QC awareness
experience in marine construction of port and breakwater.
Design Manager, Residential construction superintendent, CAD design/drafter, and Manufacturing Engineering tech
Marine Surveyor
Knowledge of all signals as well as to give ground guide to all vehicles including tanks.
Seeking a Challenging Engineering position, with a potential for advancement, in Computer Systems (Unix/Windows O.S. Administration, Enterprise Infrastructure IT System & Network Management, Wireless Solutions, IP Video Surveillance, Enterprise Access Control and Information Security).
Certified PMP having rich experience in EPC & construction management of Real Estate, Infrastructure and Petro-chemical Projects, Proficient in Primavera, MS Project and MS Office
Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.
Being a Diploma in Mechanical Engineering holder having more than 16 years experience in construction particularly in Welding and NDE
I am qualified Associate civil engineer having 20+year experince of project construction in oil and gas fields.
Experienced Structural Design Engineer in 3-D FEM Experties
Planning and project controller
Bitumen storage terminal construction and all bitumen products manufacturing expereince
Over 17 years in the field of Construction and Buildings in Egypt, Qatar and UAE
Mechanical building services design engineer. Experience in design HVAC, Plumbing & Fire Fighting along with site supervision and project management activities.
First   1   [ 2 ]   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com