Resume - DCS, ESD, SCADA design and commissioning, expertise in field instruments design ...

Misco Jobs

Resume #73124

CONTACT INFORMATION:
View contact information...

Engineer ¡V Control and Instrumentation

Job Title: Instrumentation and Control Engineer

Seeking assignment in Engineering Design/ System engineering in Control System/ Troubleshooting with a growth oriented organization of repute

KEY AREAS

„± 5 years of professional experience in FEED, Design and Detail Engineering and Commissioning of Control & Instrumentation systems for Pipeline Projects in Oil and Gas Sector and Mega Power Projects in India and abroad.
„± Currently designated as Discipline Engineer ¡V C&I in Dodsal Engineering and Construction Pte Ltd, a leading and renowned multinational EPC Company in GCC region with registered office in Singapore and corporate office in Dubai, UAE.
„± Hands on experience in Design and Detail Engineering of Instrumentation & Control systems for Mega Power Projects meeting stringent codes and guides laid down by international agencies like the IEEE, IEC, ISA, API, ASME, ASTM, IS, BS, IAEA, etc.
„± Experienced evaluation, detail engineering and commissioning of various real time process control systems i.e. DCS/ESD systems.
„± Specialized in all kinds of field instrumentation from sensor level, cabling, system integration, programming and various software tools like INTOOLS, AUTOCAD.
„± Hands on experience in detail engineering which includes selection of instruments, review and finalization of P&IDs, preparation of cause and effect diagram, logic narratives, logic diagram, single line diagram, interconnection diagram, cable schedule, instrument hook up, I/O list, alarm and trip summary list, instrument index etc.
„± Responsible for FAT/IFAT and commissioning of DCS/ESD/SCADA of Honeywell Experion PKS, Triconex Tristation 1131, Invensys/FOXBORO I/A series, ICS Triplex, ABB, Siemens as well as process instrumentation packages such as Flow Metering Skids, MOV in Pakscan network, Enraf Tank Gauge System, Unit Control Panel for pumps, machine condition monitoring systems etc through a proper coordination with various international vendors.
„± Hands on experience in control configuration, display configuration, point configuration, alarm panel configuration, various troubleshooting in DCS/ESD.
„± Conversant with the Modbus communication using RS 485 link and OPC interface between DCS and third party systems.
„± Experienced in schedule planning for various instrumentation commissioning activities to complete the assigned job well within time.
„± Experienced in coordination with Client (M/S Takreer) and PMC (M/S Tebodin ME) as a representative of contractor to involve them at various stages of projects with proper planning.
„± Successfully completed management and coordination of 220 Mwe KAIGA and Rajasthan Atomic Power Projects with consultancy M/S Rolta India with proper planning, procedures & co-ordination.
„± Adept at handling the complete project operations entailing planning, design, resource utilization and maintenance & manpower management and use of Computerized Maintenance Management System (CMMS) for daily maintenance planning activities and preventive maintenance activities.
„± An effective communicator with excellent relationship management skills and strong analytical, problem solving & organizational abilities.
PROFESSIONAL EXPERIENCE

Oct, 2007 ¡V Present
Dodsal Engineering and Construction Pte Ltd., Abu Dhabi, UAE
Discipline Engineer C&I

Project In Hand:
Inter Refineries Pipeline Project
Client: Takreer
PMC: Tebodin ME

Scope Of Work:
„± Engineering and Commissioning of Control and Instrumentation system for Inter Refineries Pipeline Project consists of three 233 km long pipelines of 10", 12" and 16" size between Abu Dhabi Refinery and Ruwais Refinery in UAE with storage at Mussafah, Al Ain and Abu Dhabi International Airport.
Principal Duties:
„± Involved in Review and Finalization of P&IDs, I/O List, Cause and Effect Diagram, Logic Diagram, Logic Narratives, Logic Write ups for DCS/ESD system and implementation of the same with proper coordination with vendors.
„± Review and Finalize vendor generated documents such as Functional Design Description, Detail Design Specification, System cabinet and termination drawings.
„± Prepare As Built documents (such as Instrument Loop Diagram, GA Drawing etc) in order to establish smooth hand over of the project.
„± Involved in reviewing Factory Acceptance Test Procedures, Integrated FAT along with Site Installation and Acceptance Test of DCS/ESD system and successfully carried out the above tests (Implementation & verification of logics with Engineering Diagram & Wiring Diagram and installation datasheets / specifications) with optimum Schedule & cost impacts.
„± Study project scope and specifications (including P&IDs, design documents, drawings such as wiring diagram, interconnection diagram, cause and effect diagram, I/O lists, logic write ups, alarm and set point summary list, cable schedule, instrumentation index etc), identify inadequacies if any in engineering documents, vendor supplied drawings and the system installed in field.
„± Review of precommissioning procedure, loop folders developed by construction/QA/QC and prepare commissioning procedure in line with the vendor recommendation, carry out inspection of systems, and develop punch list with an objective of achieving safe and flawless commissioning and operation.
„± Responsible for commissioning and operation of the following control system (DCS/ESD/SCADA/RTU) by means of proper coordination with various system vendors at different stages of project to fulfill SAT and ISAT.
* Honeywell Experion PKS C200 Distributed Control System: (used in pipeline automation in Abu Dhabi Refinery) knowledge of engineering tools such as configuration studio for control builder using FBDs, HMI Web Display Builder, Quick Builder, perform loop checks with third party systems through RS 485 communication link and OPC link, perform cause and effect checks and demonstrating the same to client, carry out various modification in graphics as well as logic to meet stringent process requirement, perform SIT/SAT activities with client and PMC as a part of acceptance of the system, perform tie in of DCS built in Experion platform with the existing DCS in TPS platform through ESVT server and Domain controller, involved in the up gradation of existing TDC 3000 system.
* Invensys I/A Series Distributed Control System: (used in pipeline automation in Mussafah terminal) used for oil movement and management, thoroughly conversant with applications such as Tank Inventory System (TIS), Movement Automation System (MAS), Order Movement and Management (OMM) application package, involved in FAT and IFAT of the system, hands on experience of commissioning of I/A Series 8.0x system, which includes system integration with third party system with Modbus Serial Link (RS 485) and OPC communication interface, perform loop check as well as cause and effect check and demonstrating the same to client, perform the checking of system behavior in meeting different control narratives, carry out major modifications in logic and process display in order to meet stringent process requirements, perform SIT/SAT as per approved vendor document, conversant with engineering tools like IACC (I/A Series Configuration Component) for control configuration, Fox Draw for building process display and Fox View, use of FCP 270 and integration with process by means of different high speed (2 Mbps) 200 series FBMs,
* ICS Triplex TMR PLC: (used as ESD in terminal Abu Dhabi Refinery terminal) knowledge of IEC 1131 toolset built in IEC 61131-3 programming standard for build up ESD related logic using FBD, carry out FAT, IFAT and commissioning of Trusted TMR system and perform logic checks as well as demonstrating the same to client with cause and effects to achieve valuable progress in projects, perform valuable change in logic to meet stringent process requirements.
* Triconex TMR PLC Tristation 1131: (used as ESD in terminal Mussafah terminal) involve in FAT and IFAT of the system, hands on experience of commissioning of Tristation 1131 system (a 3-2-1-0 type SIL 3 TMR PLC), adept at programming of ESD related logics using Tristation 1131 Developer's Workbench which is an integrated tool for developing and testing of various process control application for Tricon controller, carry out various logic modification as recommended by cause and effect and logic diagram, perform logic checks as well as demonstrating the same to client with cause and effects to achieve valuable progress in projects, perform valuable change in logic to meet stringent process requirements, perform SIT/SAT activities with client and PMC as a part of acceptance of the system.
„± Responsible for commissioning and operation of various process instrumentation (level, temperature, flow, pressure etc) of various international repute like Endress Hauser, Rosemount etc.
„± Responsible for commissioning and operation of process instrumentation packages e.g.
* Enraf Advance Tank Gauging System
* Emerson Flow metering skid with OMNI flow computers: measures oil flow of different oil product by means of coriolis flow sensor (CMF 400) and core processor using Micro Motion Flow Transmitter (MVD 2700) equipped with OMNI flow computers for measuring mass, volumetric and corrected liquid flow, involved in trouble shooting of RS 485 communication with DCS.
* Pakscan MOV Control Station
* Bently Navada Machine Condition Monitoring System
* Unit Control Panel for providing stand alone controller for main line pumps using Allen Bradley PLC RS Logic 5000.
„± Prepare various documents like commissioning procedure, acceptance procedures.
„± Procurement of unavailable spares with proper specification from vendors selected from approved vendor list.
„± Lead a strong group of supervisors and technicians in carrying out the above tasks well ahead of the project milestones.
„± Ensuring commissioning with proper documentation (commissioning procedures, Checklists & reports) for maintaining compliance with ISO requirements.
„± Successfully carried out Hot Tie-ins and site integration activities with proper planning, procedures & co-ordination.
„± Management of allocated engineering projects and modifications via the Engineering Change Management procedure.
„± Effectively communicate programmes of work, at appropriate level, to relevant personnel.
„± Assess, formulate and develop project and modification requirements into prioritised and functional scopes of work which can be achieved in a safe, timely, effective, and economical manner.
„± Co-ordinate projects and modifications activities; specifically with regard to logistics, materials, resources and availability of safe work-fronts.

August, 2003 ¡V September, 2007
Nuclear Power Corporation Of India Ltd, India
Executive Engineer C&I

Project Completed:
„± TARAPUR ATOMIC POWER PROJECT, Unit-3 & 4, (2 x 540 MWe), Maharashtra.
„± RAJASTHAN ATOMIC POWER PROJECT, Unit-5 & 6 (4 x 220 MWe), Rajasthan.
„± KAIGA ATOMIC POWER PROJECT, Unit ¡V 3 & 4 (4 x 220 MWe), Karnataka.
„± KAKRAPAR ATOMIC POWER PROJECT, Unit ¡V 3 & 4 (2 x 700 MWe), Gujarat.
Principal Duties:
Design:
„± Responsible for detail FEED / Concept studies and analysis, design and detail engineering of the control and instrumentation for 540 MWe and 220 MWe Nuclear Power Projects in INDIA which include preparation of Preliminary design & safety analysis, Design Basis reports, Design / Project specifications, FEED reports, Study Reports / Design Notes, System integration & feasibility studies, selection of instruments, Safety classification, drawings (P&ID, interconnection diagram, loop diagram, etc), design manuals, etc.
„± Detail engineering which includes selection of instrument, sizing of flow elements, reviewing of I/O List, Cause & Effect diagrams, Instrument Schedule, Cable schedule, interconnection diagrams, loop drawings, Logic diagrams for DCS & PLC (ESD) systems, Layout drawings / General architecture drawings, single line diagrams, Termination details, Control Narratives & logic write-up etc.
„± Involved in Review & Finalisation of P&IDs, Scope of Work for various control systems, DCS & PLC (ESD) failure analysis / fault tree/HAZOP studies, Vendor generated system documents (Functional Design Specifications, Detail Design Specifications, etc) & drawings (system cabinet and termination drawings, etc).
„± Detail engineering of various DCS & PLC (ESD) systems (Procontrol P PLC, Dual Processor & Hot-standby DCS systems, Eurotherm make Process Automation Controllers, PROGICON3020, etc) for Primary process control systems, Boiler system, Water systems, Turbine Generator systems, etc.
„± Programming of DCS / PLC (ESD) systems to provide on-off control, interlocks according to the process logics, electrical protection to pumps, process logics and interlocks to compressors and valves for Safety related & Non safety related systems in Nuclear Power Plants.
„± Successfully completed management and coordination of 220 Mwe KAIGA and Rajasthan Atomic Power Projects with consultancy M/S Rolta India with proper planning, procedures & co-ordination.
„± Involved in reviewing Factory Acceptance Test Procedures, Integrated FAT & Site Acceptance Test Procedures and successfully carried out the above tests (Implementation & verification of logics with Engineering Diagram & Wiring Diagram and installation datasheets / specifications) with optimum Schedule & cost impacts.
„± Work with the operations team, providing direction & information to consultants and contractors on respective programs and projects. Mentors Junior Project Engineers and provides project related direction to other engineering, technical and functional teams personnel.
„± Act as responsible interface and focal point for projects and modifications activities / queries.
„± Participate in the integrated planning process and provide all necessary details associated with projects and modifications.
„± Interpret work-scope requirements, and demonstrate ability to recognise potential problems and prospective solutions.
Commissioning and Maintenance:

„± Fully responsible for commissioning and maintenance activities related to control and instrumentation system used in steam boiler, primary heat transport systems, moderator system, liquid zone control system.
„± Fully responsible for commissioning of DCS/ESD systems such as Dual Processor Hot Standby System, Progicon 3020 PLC, Procontrol P14, Siemens S5 PLC which includes loop checking, logic/ functional checking, completion of site installation and acceptance test.
„± Fully responsible for commissioning of field instruments such as transmitters (of Rosemount, Yokogawa, ABB), control valves (of Fisher, Rotork Skilmatic), ESD valves (of Rotork).
„± Involved in planning and activities for maintenance and procurements of spare parts which includes coordination with vendors and procurement department.
„± Responsible for planning and execution of preventive and breakdown maintenance within the scope of work.
„± Adept at handling the complete project operations entailing planning, design, resource utilization and maintenance & manpower management and use of Computerized Maintenance Management System (CMMS) for daily maintenance planning activities and preventive maintenance activities.
PROJECT HANDLED

In Abroad:
„± Inter Refineries Pipeline Project: Consists of three 233 km long pipelines of 10", 12" and 16" size between Abu Dhabi Refinery and Ruwais Refinery in UAE with storage at Mussafah, Al Ain and Abu Dhabi International Airport.
In INDIA:
„± TARAPUR ATOMIC POWER PROJECT, Unit-3 & 4, (2 x 540 MWe), Maharashtra.
„± RAJASTHAN ATOMIC POWER PROJECT, Unit-5 & 6 (4 x 220 MWe), Rajasthan.
„± KAIGA ATOMIC POWER PROJECT, Unit ¡V 3 & 4 (4 x 220 MWe), Karnataka.
„± KAKRAPAR ATOMIC POWER PROJECT, Unit ¡V 3 & 4 (2 x 700 MWe), Gujarat.

ORGANIZATIONAL DETAILS

Duration Name of Company Designation Location
October 2007 ¡V till date Dodsal Engineering and Construction Pte Ltd, UAE Discipline Engineer C&I Abu Dhabi, UAE
Aug 2003 ¡V Sept 2007 Nuclear Power Corporation of India Limited, (Dept. of Atomic Energy), Govt. of INDIA accredited to ISO-9000/ ISO- 14000. Executive Engineer ¡V C&I Design Mumbai, INDIA.

ACADEMIC CREDENTIALS

„± Post Graduation (eqvlt. to M.Tech) in Power Plant Engineering (2004) from Bhabha Atomic Research Center (BARC) Training school, Mumbai, INDIA.
„± B.E. Instrumentation Engineering (2000-2003) from University of Calcutta, INDIA.
FIRST Division with 76%.
„± B.Sc (Hons.) Physics (1997-2000) from University of Calcutta, INDIA. FIRST Division with 65.5%.

SCHOLASTIC ACHIEVEMENTS

„± Secured 97.84 percentile in GATE 2003, all India rank-99.
„± Awarded Certificate of Merit on National Scholarship Scheme for securing high position in Higher Secondary Examination in 1997.
„± Awarded Certificate of Merit on National Scholarship Scheme by Govt of India for B.Sc in 2000.

IT SKILLS: Conversant with MS-Dos, Windows, C, C++, VB, MS Office, Excel, AUTOCAD, INTOOLS.

„± Certificate in Basic Diploma in Computing from Indus Institute of Information Management (2002) under Govt. of West Bengal State, India.
„± Certificate in Office Assistance Course from Gandhi Institute of Computer Education and Information Technology (2000), Mumbai, India.

PERSONAL DETAILS

Date of Birth: 27th December 1978.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 2793)

Go to Search Parameters...

Brief Description

A dedicated worker who is able to solve on job problems and leads the team with motivation

I am a certified electrical engineer with 15 years experience

I've been working as HSES Advisor more than 5 years in different oil& gas projects such as Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.

Aconex system user for Management on Line in Dubai Metro Project, 2. Health & Safety Environment (HSE Management), 3. Construction Management, 4. Computer software (Microsoft office& AutoCAD).

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

CSWIP 3.1 Welding Inspector, ASNT NDT Level 3, QC Engineer

Project managing to produce high performance Polyurethane

To get a challenging position in the field of Electrical Engineering in a growth oriented company, where I can apply the knowledge, skill and experience I have acquired for growth of my prospective employer and for my personal development.

I have vast experience in pipeline inspection involving smart pig, pipeline cleaning, coating. Also, i have experiences in commisioning/decommisioning of pipelines and other engineering maintenance activities relating to static equipment. I am very conversant with Microsoft office and HSE standards.

AT PRESENT I AM ON THE VACATION FROM PETROKEMYA (SABIC)KSA AND WORKING FOR ARCHIRODON CONSTRUCTION OVERSEAS CO.S.A IN DOHA -QATAR ON THE VISITING BASIS AND ASSIGNED AS PROJECT INCHARGE FOR THEIR ON GOING QATOFIN MARINE PROJECT DOHA-STATE OF QATAR.

Preventive and corrective maintenance for engines amd pumps at Rigs

Industry experience in Designing of Electrical System for Offshore / Onshore oil & Gas projects using Auto CAD, ETAP, MATLAB, CGLUX.

I am looking for a job as Technical Manager/Supervisor for heavy machines worldwide

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

QA/QC Inspector having 6 years experience in Refineries, Offshore, Gas Plants, LNG

Safety officer - 3 years

College education and master's degree in civil and environmental engineering within the research area of construction engineering and management

want to work hard ,best up to my level, in a progressive environment with a feeling of team work.

14 years of experience in steel structures detailing and checking. I know the tools Auto CAD, X-Steel and Micro station for detailing the jobs. Now, working in Aumund Engineering Pvt. Ltd. as a Sr. engineer. my responsiblitie is to lead team for detailing.

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

DCS, ESD, SCADA design and commissioning, expertise in field instruments design and commissioning

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Engineer have Bsc. in civil eng. & higher diploma in water polllution control eng. with experience of more than 5 years in Building & environemtal works

Realiable and Multi Skills worker for engineering , construction, and mining related jobs

Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete

I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.

Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.

Piping designer

industrial instrument mechanic/building automation

Chartered Project Manager in the UK with the CMI Body

19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Electrical field

„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.

B.S. in Mechanical Engineering, 14 years of experience from inception to completion of HVAC design and construction in commercial building (high-rise, shopping mall), pharmaceutical, laboratories, clean room, and hospitals.

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

A proactive and experienced individual with excellent Turnover and Acceptance Coordinator, Senior Document Control, HSE coordinator and Basic Life Support coordinator skills in various sectors like Oil & Gas sector, Petrochemical, Desalination Water & Power Plant Sector.

Bridge, Highways/Roads engineer: A devoted qualified Civil Engineer seeking a challenging career opportunity in Bridges/Roads construction management projects in the Middle East/Africa regions

Construction Manager for large scale projects

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

Instrument Quality Engineer/Inspector & Instrument Engineer and Commissioning Coordinator

graduated in mechanical engineering, Proficient in Autocad, Trained on HVAC systems of Indian Institute of management, Worked as maintanence engineer in The Western India Plywoods, India, Worked as a software engineeer in Cognizant technology solutions,

Project Manager / Finance Management

Instrumentation Technician/Trainer/QA/QC

Masters in Mechanical Engineering , with CAD/CAM and FEA courseowrk , Done Maintenance Engineer job in Textie indutsry , Undergarduate Internship in Desiging and Graduate Internship in Desiging and Analysis , Handled 3D softwares like CATIA , Pro-E and 2D software like Autocad

Extensive experience in hardware and software testing. Executed regression tests. Logged defects and participated in defect prioritization and verified fixes.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out