Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #73320 next resume »» CONTACT INFORMATION: View contact information... PROFESSIONAL EXPERIENCE Industrial Experience Intern, Mining Engineer, Surface Mine Operation: Anglo Gold Ashanti, Iduapriem Gold Mine, Tarkwa-Ghana (May 2003-Aug. 2003) Duties and Accomplishments Include * Supervising pit operations * Health, safety and environmental acting representative * Supervised blasting operations such as blast pattern mark out, blast hole dipping, charging and stemming. * Monitoring of trucks, excavations and ancillaries on field from a control room Intern, Mining Engineer, Surface Mine Operation: Anglo Gold Ashanti, Iduapriem Gold Mine, Tarkwa-Ghana (Dec 2003-Jan. 2004) Duties and Accomplishments Include * Forecasted weekly production and prepared daily and monthly production reports. * Monitored and supervised excavations, loading and hauling of ore and waste * Monitored fuel consumption and prepared contractor's equipment accruals. Graduate Research Assistant/Teaching (New Mexico Bureau of Geology and Mineral Resources) * Perform research on shear strength and slope stability of rock piles. * Perform in-situ direct shear test to determine in-situ shear strength parameters and analyses results * Perform geotechnical laboratory tests (Particle size sieving, Hydrometer test, Atterberg limit test, Laboratory direct shear test, Specific gravity, Point load test, and Slake durability test) and analyze results * Write report and research findings Mining Engineer – Bio Consult Limited 11/2005-12/2006 * Preparation of Environmental Impact Statements (EIS) Report and of Resettlement Action Plan (RAP) Report for Mining Companies in Ghana * Preparation of Environmental Management Plan (EMP) Report and Preliminary Environmental Report (PER) for Quarry for Mining Companies in Ghana National Service -Environmental Protection Agency 11/2004-10/2005 * Creation of Database for all Mining Companies * Health, Safety and Environmental Management * Monitoring, and Inspection of Mining Companies and report writing on all Inspection Conducted * Member of a Technical Review Committee Environmental Rating Performance and Public Disclosure Workshop 03/2005-05/2005 EDUCATION New Mexico Institute of Mining and Technology Socorro, USA. 2007, Jan– Completion by Dec. 2008 MS Mineral Engineering (Geotechnical Engineering Major) GPA: 3.82 Expected Date of Graduation December, 2008 Research Project: Comparing and Correlating Shear Strength Parameters of Rock Pile and Analog Materials at the Molycorp Questa Mine Western University College of Kwame Nkrumah University of Science and Technology (WUC of KNUST) Tarkwa, Ghana, 2000, Oct - 2004, May Bachelor of Science, Mining Engineering Adisadel College Cape Coast, Ghana 1995, Jan - 1997, Dec Senior Secondary School Certificate Examination (SSSCE Certificate) COMPUTER SKILLS * Microsoft Office, Windows Experience, Intro. to Matlab, Intro. to Surpac2000, FORTRAN 77, AUTOCAD, ARCGIS PROFESSIONAL AFFILIATIONS/HONORS * Student Member of ISEE * Student Member of the Society for Mining Metallurgy and Exploration Inc. (SME), USA HEALTH AND SAFETY * MSHA Part 48 training * National Safety Council Defensive Driving Certificate * Excellent drug, alcohol, health and safety records * Ability to recognize occupational hazard and solve them LEADERSHIP EXPERIENCE * IT Advisor for Santaclausions (Adisadel College Old Boy's Ass) * Executive Committee Member of Mining & Mineral Engineering Students Association (MMESA), Western University College of Kwame Nkrumah University of Science of Technology [KNUST], Tarkwa PUBLIC SERVICE * Judge for 55th Annual New Mexico Science & Engineering Fair * Offered tutorial service in College for colleague course mates * Rendered a community tutorial service to basic school and senior secondary school students INTERESTS Soccer, reading, listening to music, computers View contact information... «« previous resume next resume »» Search Results (Resumes 1301 to 1350 of 2813) Go to Search Parameters... Brief Description I am looking for a position as a Civil Engineer in the Building and Construction sector. Education May/June 2002 J.N.E.C. Aurangabad. Bachelor of Engineering (CIVIL) Passed With 1st Class Computer MS OFFICE Knowledge AUTOCAD 2000 5+ years experience in construction field which includes maintenance of heavy earth moving equipments and heavy vehicles. MS Office, MS Project, Primavera, AutoCAD, Inventor, CATIA, SOLID EDGE, Automation Studio, FluidSIM, ProSTEEL, Pro/Engineer, and MATLAB. Bs.D Qualified Mechanical Egnineer Experienced in Piping and Pipeline Construction and Precommissioning 16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports Entery level AutoCad Drafter/Desingner. Associates of Aplied Science in Computer Aided Engineering and Design, work expierence includes construction and mecnanical background. Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA, QATAR IN CONSTRUCTION AND SHUTDOWN PROJECTS - OIL AND GAS. 46 years international experience in EPC project management in oil, gas, power, petrochemical plants, refinery, iron and steel plants, mining, mineral processing plant and infrastructure design and construction. Activities include FEED to project delivery for greenfield and brownfield projects. HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection Civil Engineer with seven years experience in project control, construction and management of civil works for the most important projects in Ecuador, including oil and gas companies, power plants, access roads, fiber optic, pipelines. I am willing to travel anywhere. Licensed Land Surveyor 27 years experience Experienced Technician Piping designer 21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india. Worked as a Engineer Projects & Purchase. I have 3 yrs of experience in multi-storey constructions. ARCHITECT WITH 03 YEARS INDUSTRY EXPERIENCE Positive thinking, motivating and making work to be done by others,accept responsibility, self confident, quick decision, project management.contract management,business management. To work in an organization where I am given to excel in, to learn and gain experience and to be able to contribute to the organization in the long term. Supervisor Production/Fabrication/Engineering Quality Control/Inspector Professional Electrical Engineer Total of 5years experience in Quality control, Welding, Heat treatment & NDT field a QC in EPC sector Project enginer with 5 yrs experiece Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related Microstation CADD Civil Engineer Utilities Specialist and GIS Quality control and quality assurance of control systems and networking Power Transmission Line & Lighting of Highways (design overhead lines, instillation, maintenance, modeling, coupling, pipeline, cable size, poles, illumination (lux) & cd/m2 calculation)Low Frequency Electromagnetic Field (Transmission Line) Environmental Radiation Effects on Human Health/ Mitigatio A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines. Mechanical Engineering Technician, MS Project, Premavera, Auto-CAD, SAP, Microstation, Planning , Maintenance Planning, Scheduling, Primavera, Artemis, Cost, Project Controls, Metrics, Construction Manager, Site Manager Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs Ability to understand and learn new computer programmes accurately and quickly, Strong organizational skills, Ability to work under stressed conditions, Ability to work in multi-task duties, Excellent communication skills AutoCAD, Surveying, Structural Surveying, Analitical Surveying Chemical Engineer- Petroleum Industrial Processes Design civil engineer having a good knowledge of computers Engineer’s degree in mechanics Speciality: “Construction and exploitation gas and oil pipelines, gas storages and petroleum storage depots” Carrying out all Title & Non-Title Topographical, Engineering, Cadastral and Township Planning Surveys. GIS Packages: MapInfo Products, AutoDesk Products, ArcGIS, • Preparing Material Approval Form. Power generation, substations, transmission and distribution, circuit breakers, machines, service, plants, computer. To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization. MASTERS - Mechanical Engineering – [GPA: 3.6 / 4] Preparation of Environmental Impact Statements (EIS) Report and of Resettlement Action Plan (RAP) Report for Mining Companies in Ghana Structural Engineer with broad knowledge on design and analysis of Buildings (concrete and steel structures). Full knowledge in using Computer aided design Software such as Etabs, Staad pro, Prokon, Sap2000, CSI Safe, Xsteel, AutoCAD, Microstation, and other Computer programs (MS Office Word, Excel, Project Management, Cost Control, Estimating 10 years Systems Administration experience, wide verity of systems. Operational Specialist First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   [ 27 ]   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com