Resume - I have vast experience in site works and have a good knowledge of soil and rock ...

Misco Jobs

Resume #73429

CONTACT INFORMATION:
View contact information...

Year of birth: 1967

Nationality: Turk

Occupation: Geological (Hydrogeological) Engineer

Second Language: English (good and fluent)

Education:

1983 – 1989 Hacettepe University, Faculty of Engineering, Geological (Hydrogeological) Engineering

1986 – 1987 English Language Course in International Institute, Detroit / Michigan / USA

1980 – 1983 High Scholl

Special fields of competence:
Soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weeps holes, thin-wall works,
Slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

Professional history:

2007-up to date GATE – Construction Company
Client: AGIP
Atyrau / KAZAKHSTAN
Site Engineer of Dewatering and Deep Excavation,
Dewatering
Sheet pile works, 2.500 m2
Manhole, catch basin installation
Infrastructure works
Underground works

QA/QC Department
SDRS Documentation

2007 INTER Foundation Company
Site manager of foundation works
Client: PETRONAS
Turkmenbashi / TURKMENISTAN
Cast in-situ piles, 6.000 mt.
Geotechnical tests,
Deep excavation

2005 IZMIRGAS - Intercity Natural Gas Company
Natural Gas Line Route & Re-Route Engineer
Izmir / TURKEY
Site Engineer for pipeline route

2003 BOTAS – BTC PROJECT
Georgia – Azerbaijan – Turkey Crude Oil Pipeline
Geotechnical Engineer
Client: BP
Adana - Sivas / TURKEY
Crude Oil Pipeline, Dia. 34" & 42", 344 km.
Geotechnical investigations for pipeline route
As-built reports
Scope change works

2002 TARTICILAR SHEETPILE Construction Co.
Natural Gas Station – Onshore Section
Blue Stream Project
Client: SAIPEM
Samsun / TURKEY
Site Manager of Excavation, Backfilling, Pile Works
Sheet pile, 10.000 m2

2000 TEMKA Foundation and Drilling Co.
Site Manager of All Foundation Works
Istanbul, Izmir, Bergama, Ayvalik, Canakkale
Cast in-situ Piles, 24.000 mt.

1990 KUTLUTAS Foundation and Drilling Co.
Site Engineer than Site Manager of All Foundation Works
Istanbul, Izmir, Dalaman, Golcuk, Gaziantep, Urfa
Dywidag Rock Anchors, 67.000 mt.
Soil anchors, 12.500 mt.
Cast in-situ Piles, Ø 120 cm., 50.800 mt.
Cast in-situ Piles, Ø 65 cm., 40.000 mt.
Swellex bolts hole drilling, 14.800 mt.
Drainage hole drilling, 12.200 mt.
Weep holes drillings, 16.200 mt.
Vibropiles, 24.500 mt.
Thin-wall works, 22.500 mt.
Slurry Trench Works, 2.400 m2

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 2819)

Go to Search Parameters...

Brief Description

Mechanical Engineer, Engineering Management, Project Engineer, Reengineering, TQM, Activity Based Accounting System, Production Planning & Scheduling, Budget Controlling, ARIS Toolset, Access

12 years experience in controls design and project management of complex automated systems.

PERSONAL EXPERIENCE(9 YEARS )

I would like to apply for a senior /executive position of highway /infrastructure projects

i am working as a TPI inspector in welding,piping,tankages,structural,vessels ect. and my basic qualification is DME and additional qualifications are AWS CWI, ASNT Level II in RT,UT,MP and DPT

As a Principal Process Engineer, supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.

I am presently working as a procurement coordinator since may 2002. projects include OLG PROJECT in oman and Pearl GTL Project in qatar. Prior to that, i was a quantity surveyor from august 1996 to april 2002

A. CIVIL STATUS DATAS

CNC PROGRAMMER WITH CARVING DESIGNER USING DELCAM SOFTWARE

Engineer for Power System Analysis, SCADA/EMS chief engineer

Civil surveying engineer can work as cheif surveyor & site manager

Civil/cad engineer, structural steel detailer

EXPERIENCED METASWITCH tECH. wORKED WITH 3510 AND 2510'S CALL AGENTS, EMS SERVERS, WEB SERVERS AND OTHER UC9000 TYPE VOICE MAIL SYSTEMS.

Design and construction in bridge and road

Having 14 years of Drafting work experience in Steel structures, Civil, Architectural and Mechanical layouts, Worked as a Engineer cum Draughtsman in Industrial and Residential Construction Projects In various Platforms like high raised buildings, Factory plants, Emergency shelters, Pumping Stations

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Civil Design and Engineering specialist Highways, including design standards, Geometric design, Horizontal & Vertical alignments, Detailed Estimations, Bid Evaluation, Design Drawings, Coordination with client, Preparation of PDR and Feasibility Reports, Pavement Design, Traffic Surveys, Data Analys

Diploma Mechanical engineering Pipe fabrication, erection Supervison manpower

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

Senior Chemical Integrity Engineer

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

Mechanical engineer (naval welding) with 15 years experience seeking a job as supervisor(superintendent engineer).

Over 7 years experience of mechanical works in offshore and onshore in various project such as oil and gas plant / LNG gas plant / cement plant (industrial and commercial facilities).

Well experienced Project Architect / Coordinator /Auto Cad Designer / Quantity Surveyor

Experiences on civil construction works and i hope it'd be tasteful and challenging.

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

Expericiend All around AutoCad Tech

Installation , testing, commissioning , trouble shoot and maintenance of HT, LT control panels, substation 33KV, Transformers 4MvA, weigh feeders, PLC, Ladderlogic, Level switches, VVVF drives,bag filling weighing systems, HT , LT motors,relay logic panels etc

Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.

A result oriented professional with 18 years of international exposure in the field of Projects / Construction division . Fire detection , alarm

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

Supervising the Production staff to make sure of high productivity and efficiency.

I am a qualified mechanical Engineer specialized in Acoustics

Testing,repairing and troubleshooting electronics down to component level.

Planning & Scheduling, Construction

OBJECTIVE: A Management/Field Position in Civil Engineering or Construction Management.

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Electrical Engnineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

Proactive and versatile drafting professional with a solid reputation for generating long-term results in a short-term world. Effective problem-solver who interfaces well with management, co-workers and clients. Able to meet aggressive deadlines, juggle multiple priorities independently or in a team

Execute all structural works, finishing works. Aware of survey works. Using computer software proffessionally

Experienced Cad Manager/Project Coordinator. Multi Discipline Design. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

a. 10 years in Qty. Survey and Cost Estimates for multi-million dollar Int'l Projects. b.10 years in Electrical Power Projects for Power Plants, HV OHL Transmission Lines and Substations. c. 2 years in multi-million dollar Military a

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out