Resume - 10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erec...

Misco Jobs

Resume #7430

CONTACT INFORMATION:
View contact information...

RESUME

Date of Birth: 15.06.1972
Nationality: Indian
Marital Status: Married

Languages Known: English, Tamil, Malayalam and Hindi
Professional Qualification: B.E. (Electrical & Electronics), 1St Class, ( 1994 ), Annamalai University, Chidhambaram, Tamilnadu, India
In-plant Training: Thermal Power Station-II (7x210MW), Neyveli Lignite Corporation Limited, Neyveli.
Computer knowledge: MS-Office, Prema Vera, MS Project, Basic, Forton, Cobal & C.
Work Experience:
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-Stations, Transmission Lines, Oil & Gas Industries, Power & Desalination Plant, Cathodic Protection of Oil / Gas well casings with flow lines & sea water pumping station as site engineer, Project Engineer & Project Management Consultant.
UAE Driving Licence No, Type & Validity: 394853/T, Light Vehicle, From 01/08/2004 to 31/07/2014

DETAILED WORK EXPERIENCE

September 2003 to till date: VECO Engineering, Abu Dhabi, UAE.

Position: Project Management Consultant ( Electrical & Instrumentation ) - PMC Team Member in a seven member team
Project Value: 57 Million USD
Job Responsibilities:
Permit to Work ( PTW ): Completed PTW course arranged by ADCO. Working as job originator for issuing/closing permit to work (PTW).

Design verification as per contract specification, Quality procedure/Inspection test plan evaluation / preparation comments & implementing, Verification for cable trench route/anode ground bed location, Inspection as per ITP, issuing & closing CAR, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, schedule Implementation, Progress monitoring, Internal Electrical/Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports/correspondences with contractor and client for Erection, Testing, pre-Commissioning, Commissioning, including handing over for Cathodic Protection of 1311 Oil & Gas wells with connected flow lines using Solar Panels & battery bank, Transformer rectifiers at ASAB, SHAH, SHAGIL, HABSHAN & BU-HASA Oil fields of Abu Dhabi Oil company for onshore operations ( ADCO ) in Abu Dhabi.

June 2003 to August 2003: Galfar Engineering & Contacting Co.L.L.C, Oman.
Position: Electrical & Instrumentation Engineer

Job Responsibilities:

Erection as per P&I/hook up drawings, Testing, pre-Commissioning, Quality control & Quality assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports for 29 Bore well network with 3 ground reservoir, 2 pumping station, 12 elevated tanks Ash" Sharqiyah Sands Main Water Supply Project for drinking water distribution system at Al-kamil area in sultanate of Oman using PLC/SCADA system interconnected by 140 km FOC Cable.
Independently supervised the cable laying, straight through / end splicing, checking of FOC cables using OTDR & power meter & installation, termination, checking of float/ultrasonic/conductive level transmitters, flow transmitters, pressure transmitters, motor operated valves, PLC panels, SCADA panels & networking for SCADA.

Courses completed:
* CEP ( Competent Electrical Person ) Course
* HSE Induction
* H2S Awareness and Escape
* Permit to Work System (Signatories Course)
* Job Hazard Analysis
* Basic Fire Extinguisher
* Enhanced Site Supervision ( ESSW)
* Supervisory Safety
* Incident Investigation and Reporting
* STOP … for Safety
* H2S, O2, Hydro Carbon Gas Testing
* Refresher course on Quality Control / Quality Assurance in accordance with ISO: 9001.
March 2002 to May 2003: Hitachi Zosen Corporation, Oman.
Job Value: 175 Million USD
Position: Electrical & Instrumentation Engineer

Job Responsibilities:
Erection as per P&I/hook up drawings, final onsite calibration of instruments, loop check for instruments, sequence testing, Testing/Commissioning, Quality Control & Quality Assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Electrical & Instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports for AES 20 MGD Desalination plant in sultanate of Oman with electro chlorination plant, Seawater Screening/Pumping Station, Acid cleaning, Chemical Dosing ( Inhibitor), 3 no Evaporators & Remineralization plant with the following equipments With 90,000 Metres of electrical cables & 60,000 Metres of instrumentation cable laying /termination work.
* 9X1000 kva, 11kv/415v Transformers for Auxiliary power supply.
* 3X1500kva, 11kv/288v Transformers For Chlorination plant rectifier (Toshiba)
* 6 No's 11kv panels (ABB)
* 7 No's LV Distribution panels (Togami-Japan)
* 2 Set's of Battery charger/Battery bank/ups (Guttor)
* 16 no's 11kv motors (Ansaldo)
* 8 no of Cathodic Protection Panels with anodes & reference cell.
* 45 No's of small control panels (Togami)
* HVAC for 4no's SWGR Buildings (Blue star)
* Fire fighting & Fire alarm installation for the whole plant.
* 1 No Local Control Panels with PLC (Siemens) & AC Drives (ABB) for sea water bar/band screening system with pumps for drainage/feed water pumps to chlorination plant.
* 3 no Local control panel with siemens PLC for evaporator tube cleaning system.
* Five No DCS Panels (ABB) for sea water pumping station, 3 no evaporators & remineralization plant.
* Pressure, flow, temperature, level, & position transmitters, MOV, Analyzers.
* Airline & Impulse line work.
November-2000 to January- 2002: BALMER LAWRIE & Co. Ltd. (A GOVERNMENT OF INDIA ENTERPRISE)
Corporate Planning & Project Division, Kolkatta, India.

Position: Site Engineer ( Electrical & Instrumentation ) for Total responsibility Consultancy Service

Job Responsibilities:

Design verification as per contract specification, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, Project Planning, Scheduling, Implementation, Inspection, Internal Electrical/instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports, erection as per P&I/hook up drawings, final onsite calibration of instruments, loop checking, sequence testing, pre-commissioning, testing / commissioning and assistance to get the CEA, Pollution control board clearance & State electricity supply As Total Responsibility Basis Consultant for the following Indian Oil Corporation EPC Projects.
( Independently completed the electrical & Instrumentation works in the following projects )
* IOCL LPG Bottling plant project at Mannargudi, Tamilnadu, India.

* IOCL POL Depot project at Gulbarga, Karnataka, India.

* IOCL AFS station project at Trivendrum, Kerala, India.

December 1998 to October 2000

:

Bombay Suburban Electric Supply Ltd (Contracts Division), Chennai, India. ( BSES )

Position Site In charge (NLC Sites)

Responsibilities:

Independent Complete Supervision for Erection, Testing & Commissioning of EPC contract 110 KV double circuit over head transmission tower line work with single poles and double pole structures ( Re-routing of 33 KV head lines at Mines – I ) including shut down & re-routing, Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, billing/following payments from client, checking sub-contractor invoice & handing over to client at MINES – I, Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. (A GOVERNMENT OF INDIA ENTERPRISE)
Total Co-ordination like tender submission, Technical / Commercial bid evaluation, planning and scheduling, manpower/material arrangements to execute the project, overall erection supervision, Testing & Commissioning and handing over the project as per the EPC contract terms and conditions at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230 KV one bay expansion in thermal power station – II switchyard.

* Supply & Erection of 2 no of 750 KVA diesel generators at thermal power station I expansion site.

* Supply & Erection of 11 KV outdoor kiosks and 11KV XLPE cable laying in thermal power station I expansion site.

June 1994 to November 1998: TECHSER Engineers. ( ESA Contractors & consultants, Chennai, India )

Position: Project Engineer

Job Responsibilities:

Independent Complete Supervision for Erection, testing & commissioning of following projects including Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, tendering for further projects, billing, following payments & handing over for the following Projects at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230/11kv, 6x30MVA Sub-Station in Mines-I

* 33/11 kv, 4x20MVA Sub-Station in Mines –I

* 33kv O.H Line (10km) in Mines-I

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 2819)

Go to Search Parameters...

Brief Description

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Instrument Engineer / Supt

MECHANICAL ENGINEER WITH 2+YRS OFFSHORE EXPERIENCE IN SUBSEA PIPE LAYING,TIE IN AND RISER INSTALLATION,SBM AND PIPING INSTALLATION

Working as Engineer involved in Design and Commissioning of PLC/DCS Panels & logics and HMI/SCADA systems and Customize Reports. Engineering on multiple communication networks and protocols.

A mechanical design engineer, experienced in prototype packaging, embedded systems programming, optical integration, cryogenic environments.

A Senior Land Surveyor/ Data Manager with 17 years experience on large infrastructural projects. Diverse 3D mapping and engineering experience using MicroStation, AutoCAD, MX, InRoads and Surveying software packages. A provider of survey, design and CAD support services for tenders and projects.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

D/MAN CIVIL., AutoCAD2D & 3D

Objective: To obtain a challenging PDMS / PDS piping designer position in energy industry.

PRO-E DESIGN ENGINEER

To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”

New Graduate looking for a entry level position.

Systems Engineer, Catia, Solidworks, stress calulations

piping design, supervision on large projects, estimating/cost and budget control

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Sr. Project Controls Specialist

Cad Engineer

Telecom,telecommunication,engineer,engineering,communication,telecom and IT,WIRELESS COMMUNICATION,OPTICAL FIBER

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Water & Wastewater Specialist searching for a challenging position overseas.

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.

Project Engineer, 3 years experience, previously a shop detailer, very competent in StruCad and Autocad. Have worked in remote location, on a 4 & 1 FIFO roster on night shift

Excellent theoretical and practical command of planning, performing, evaluating and controlling administrative and commercial activities of a public as well as a private order. Vast experience of administrative management of projects and construction of civil works.

Java Servlets, JAVA, ASP, VB, ASP.NET, C#.NET, VB.NET,JSP, JavaScript, XML, AJAX,Oracle, MS SQL Server, MS Access ,IIS, Apache

MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments

Power Plant Operation And Maintenance Management

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Extensive international experience in Plant Operation, Production & Maintenance in Oil & gas facilities onshore & offshore.

Excellent inter personnel skills with, a professional attitude, expert trouble shooter & problem solver, a firm personality to see tough jobs as a leader and a team member.

Substation, Construction, Maint. HV work

Oil & Gas, Petrochemical Industry Specialist

All aspects of mineral processing plant construction

SENIOR DESIGN DRFTSMAN / TEAM LEADER

Project Officer for UBAGROUP Project Team. HSE Level 2 Certificate from British Safety Council. A Mechanical Engineering graduate from the University of Ibadan, Ibadan Oyo state. Dynamic, Creative, Self motivated and Computer Literate with eyes for details, And Ready to Learn more

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

Mechanical / Project /Construction & Commissioning Engineer/Manager BSc Hons.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

A dedicated worker who is able to solve on job problems and leads the team with motivation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out