Resume - Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek ce...

Misco Jobs

Resume #74518

CONTACT INFORMATION:
View contact information...

Nationality: Dutch
Marital status: Married
Languages: Dutch, English and German, fluent in speak & writing

Education: MBO-High school painter school
Corrosion engineering study
Chemistry study at former employer / Paint manufacturer.

Computer skills: MS-office / Excel etc. (Notebook etc available)

Certificates: NACE Certified Coating Inspector # 12470 / Level 3 + Peer.
Chartek certified fireproofing inspector.
Certificate no. EMEA-QC-029
VCA ** Safety course certificate.
CINI NTCI full certified insulation inspector Thermal / Acoustic & Cryogenic.

Work location: Worldwide

Mobility: Single International Mobile, Rotational, Hardship Location.

Training: NACE CIP course level I, II and III Peer review.
: Chartek Approved Fireproofing Inspector.
: NTCI CINI full insulation course
: Sigma Coatings training course(s) on corrosion and corrosion control.
: Course on application and inspection of fire proofing materials-AkzoNobel/Chartek
: Plural component pump applications WiWa-Germany
: VOM courses surface treatment / anodizing / Galvanization and thermal spray course.

Professional Membership: NACE - National Association of Corrosion Engineers

Professional Equipment: Owns latest and most sophisticated equipment for professional inspection, surveying, claim investigation etc.
SUMMARY OF EXPERIENCE

Over twenty years as Senior Coating Inspector / Coating Consultant / Coating Surveyor / Coating Supervisor / Coating superintendent/ fireproofing inspector / Insulation inspector.

Fully conversant with a diversified range of coatings, paints, paint techniques, and specialized coatings such as; Spray Applied Coatings, Reinforced Linings, Thermal Spray (flame and arc), Pipe Coatings, Tank Refurbishment, Fireproofing Coatings, Plural Component Spray, Shop Painting, Floor Coatings, Cementitous Coatings, Inorganic Zinc Silicates, Yacht Coatings, Rubber Coatings, Fouling Release and Hot and Cold Insulation, Ceramic coatings etc.

FULLTIME INSPECTION

2007 Oktober- Present
Client – BP Norge A/S
Project – Valhall Re-development Project.
Duties – BP coating inspector / fireproofing inspector / insulation inspector.

2007 September- 2007 October
Client – Beckers Netherlands
Project – Re-fit / Tank coating and hull coating Thailand.
Duties – Owners coating representative.

2007 July – 2007 August
Client – Pamela Shipping Belgium
Project – Tank refurbishment project
Duties – Owners coating representative.

2007 May – 2007 July
Client – BP Belgium
Project – Land storage tank refurbishment project
Duties – Owners coating representative.

2006 November - 2007 April
Client - Chevron Houston USA.
Project - Chevron Nigeria Escavados Gas Project Phase 3A / Frade FPSO project –
Abu Dhabi / Dubai UAE
Duties - Owners Coating Inspector / Senior Coating Inspector

2006 September- 2006 October
Client - Disney Cruise lines USA
Project - Refurbishment Cruise liner MV Disney Wonder / Norfolk USA
Duties - Senior Coating Inspector / Team leader inspection team.

2006 August-2006 September
Client - Wisco USA
Project - FBE pipeline Turkey Socotherm / Adria Italy
Duties - Senior Coating Inspector, owner's representative

2006 April - August 2006
Client - Dutch government
Project - BMK Project / Watergate dam refurbishment / Netherlands
Duties - Senior Coating Inspector/Consultant

2005 December-2006 April
Client - Van Uden international Shipping
Project - Conversion / refurbishment of two Ro-Ro vessels / Tivat Montenegro
Duties - Owners Coating Representative

2005 September -2005 December
Client - Noble Drilling USA
Project - Refurbishment Drilling Platform Al White / the Netherlands.
Duties - Owners Coating Representative / Coating Inspector

2005 July – 2005 September
Client - Wagenborg Shipping
Project – Refurbishment MV Slingeborg Gothenborg Sweden.
Duties - Owners Representative / Coating Inspector

2005 June -2005 July
Client - ADM Europoort / Chemical Plant
Project – HCL tank refurbishment / Insurance job
Duties – Insurance Coating inspector on HCL tank.

2005 May - 2005 June
Client - Flinter B.V.
Project - Tank and hull re-coating program / Las Palmas Canaries islands.
Duties - Owners Representative / Coating Inspector

2005 May
Client - Wagenborg Shipping
Project - Hull recoating with hot spray Ice class coat. Bremerhafen Germany
Duties - Owners Representative / Coating Inspector

2005 April
Client - Jotun Netherlands
Project – Super Yacht MV Berzinc / Complete Hull recoating.
Duty - Senior Coating Inspector

2005 February - 2005 April
Client - Fabricom GTI/Sicon Major Projects
Project - STATOIL Hammerfest Snowwhite COLDBOX Assembly Project Antwerp/Belgium
Duties - Senior Coating Inspector/Fireproofing/Insulation Inspector

2004 August - 2005 March
Client - Dutch Government / Province State Department.
Project - Complete refurbishment and Recoating of Boskoop bridge
Duties - Project manager / Coating supervisor.

2004 January - 2004 March
Client - Allseas Group S.A.
Project - Full recoating of hull pipe laying vessel / Freeport Grand Bahamas
Duties - Owners representative / Senior Coating Inspector.

2003 June – 2003 September
Client - Vroon Shipping
Project - Full recoating of hull vessel and tank survey / Viano di Costello Portugal
Duties - Owners representative / Senior Coating Inspector.

2003 June - 2003 July
Client - Heerema Marine Contractors
Project - Survey Crane Vessel Hermod / Fort Fuchon USA
Duties - Owners representative / Senior Coating Inspector.

2003 January - 2003 June
Client - Sigma Coatings Netherlands.
Project - Several Surveys / Far East Asia.
Duties - Senior Coating Inspector.

2003 January – 1991 October
Worldwide inspections / survey etc. Chief / senior coating inspector for Sigma Coatings international inspection and field services department. FPSO's, FSO's, VLCC's, Offshore modules, Bridges, Tank Linings etc.

EMPLOYERS AND DUTIES

Freelance
2003 - present
NACE Coating Inspector / Supervisor / Consultant and Surveyor at refineries, power plants, marine, yachts, offshore, Hot & cold + acoustic insulation inspector, fireproofing inspector

Sigma Coatings Netherlands
2003 January – 1991 October

Chief coating inspector International Field Department / Head Office Netherlands.

World wide tank coating projects. New building of tankers, Bulk carriers, Bridges, Tank rehabilitation and refurbishments, FPSO's, FSO's, Offshore installations and modules, Yachting, Team leader of inspection teams.

DNC/DNL/ Paint contractors
1991 October - January 1991

Project manager paint contractors in Netherlands and abroad

In charge of large projects as project manager in new building and renovation i.e. maintenance offshore production platforms, drilling rigs, FPSO/ FSO/ FSU, marine jackets, topsides, ships, bridges, water gate dams, tank linings and refurbishment, pipelines FBE or coatings, TSA & TSZ ( thermal sprayed aluminum or zinc), cold and hot insulations etc worldwide. Worked with customers, owners and government, advisors, and naval and construction architects i.e. engineers world-wide.

International paint
1991- 1990
Paint Inspector
Paint Inspector on mostly ships either new building or dry dockings, FPSO / FSO, yachts but also pipelines and tank coating, structural constructions or plants, and offshore modules, topsides etc. The inspections were carried out world wide.

Maincon / Dietsmann / 3C / DNL
1990 – 1983
Foreman / Assistant project manager
Different contractors for onshore and offshore

After period as foreman to collect experience assisting the project manager for new building and maintenance of drilling oilrigs, production platforms also with riding squads at sea, cold and hot insulation, FPSO/FSO, pipelines, chemical plants, refineries, bridges etc.
Arranged labor, logistics etc. made calculations for pricing, product specifications and quality control and inspections etc.

REFERENCES (Also as manufacturers technical representative Sigma Coatings Marine / PC)

Chevron Texaco EGP Project - UAE
Pennzoil / Wintershall offshore platforms - Netherlands.
Unocal offshore platform - Netherlands.
Conoco offshore platform - Netherlands.
Paktank/Vopak new building plant / Singapore.
Elf Aquitaine platforms- Norway.
NATO Tanks - Turkey, Iskenderun.
NATO Tanks – Malta, Valletta.
NATO Tanks – Gibraltar.
Norsk Hydro - Norway.
Öresund bridge – Sweden.
Roller coaster for Phantasia Bruhl –Germany.
Tanker refit project Beckers Thailand.
Socotherm Group pipe manufacturer – Italy / Nigeria.
Group five pipe. Pipe manufacturer – Republic South Africa.
SPS pipelines. FBE - Kenia
ABB Power station's – Aqcaba Jordan.
Snovit project Statoil Norway.
CPL- Tank refurbishments – Warri/ Port Harcort Nigeria
Allseas – Grand Bahamas
Barber Ship Management– Shanghai China
Statoil - Norway.
Kizomba A FPSO
Fertilizer plant new building – Orange Free State South Africa.
Float Glass Factory – Mersin Turkey.
Windmills – Netherlands
FPSO Turret Mooring Bluewater – Netherlands.
Bonga Project.
Umgeni water board Pipeline – Kwa-Zulu Nathal / South Africa.
Sea trucks/ West African Dry docks- Port Harcourt Nigeria
Maersk- Carena Abijan Ivory Coast
Maersk Malaysia.
MOL refinery – Budapest Hungary.
Petroland offshore-North sea.
Placid Oil offshore-North sea.
Mathilda bay Beer brewery- Freemantle Australia
Caltrex refinery – Australia.
Stena Lines - Ireland
Global offshore drilling platform – Port Gentil Gabon.
Heerema crane ship "Balder"-Rozenburg, Netherlands.
Heerema crane ship "Thialf"- West African Coast
Heerema crane ship "Hermod"- Fort Fuchon / New Orleans USA
MV Disney Wonder – Norfolk Virginia USA
P&O MV Ocean Princess cruise vessel – Italy / Grand Bahamas.
Princess lines MV Grand Princess cruise vessel - Italy
Princess lines MV Dawn Princess cruise vessel – Italy.
Princess lines MV Sun Princess cruise vessel – Italy.

COATING CONDITION SURVEYS

Heerema Marine Contractors

Thialf S.S.C.V Complete coating survey including tanks for 3 months.
Hermod S.S.C.V Coating survey of both cranes and A frames.
Balder S.S.C.V Coating survey of both cranes and A frames.

ADM Plant Rotterdam.

HCL tanks survey condition on rubber and glass lining.

Turkey

Bosphorus bridge survey condition to establish coating condition
NATO underground tanks Iskenderun.
Silos of float glass factory Mersin.
Pipelines at Hendek

Jordan

Aqaba Power plant survey. Was coating inspector at new building, survey after five years guarantee.

Kwa-Zulu Nathal South East Africa.

Drinking water pipe line of Umgeni valley water board survey of coating condition.
Was the responsible coating inspector during factory coating at Group Five Pipe in Johannesburg RSA.
Kenia

Nairobi SPA pipeline group. Surveyed pipelines coated with FBE for owner.

TANK COATINGS and LININGS
New building/maintenance, coating inspection, corrosion survey (incl. glassmat reinforced / hand lay up mat or chopped fiber spray) inorganic/organic and plural pump application at NATO, Vopak, Oil tanking,, Shell, Exxon, Elf, MOL, Petrobras, Q8 etc. in Russia, Europe, Africa, Middle East, Far East and Australia.

MARINE
For various ship owners such as Stolt Nielsen,, Jo Tankers, Barber, Royal Dutch Navy, Odfjell SA, Bluewater FPSO, Bergesen Norway, Heerema, Maersk etc.- tank linings, hull coatings, coating condition survey, maintenance, repair and new building in Europe, USA, Africa and Far East.

PLEASURE CRAFTS

Inspection of surface preparation, yacht finish application on new buildings and for various yacht owners. Especially on fouling release coatings.

INSURANCE
Various coating inspection jobs on ship new buildings, ballast tanks, cargo tanks, hull coatings and chemical plants.

COATING DEVELOPMENT
As Senior Field Service Engineer involved with field development of a.o Fouling Release / Silicone coatings / Solvent free tank coatings / GRE tank linings field and laboratory tested in the U.S.A., South America, Netherlands, Scandinavia, Mediterranean Area, Africa and Far East Asia.

TROUBLE SHOOTING
As Senior Field Service Engineer and Freelance Inspector involved in handling and solving coating problems i.e. failures of various nature.

REPORTING
All the mentioned activities have been reported in detail to the customers in the English language.

COATING STANDARDS
Familiar with international coating standards like; A.S.T.M., ISO, N.A.C.E., S.S.P.C., etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 2797)

Go to Search Parameters...

Brief Description

Project planning with MSP & preparing 2D/3D sketch, ISOs, GADs, Plot plans.

Post Graduate Naval Architecture from IIT Kharagpur , sound knowledge of naval architecute and structural designing

Design of Distribution and power transformers upto 66kV class and 20MVA. Have knowledge of singlephase, amorphous, dry type and pad mounted transformers

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Search for job in car or food industry.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

Fresh Graduate Civil / Project/ Site Engineer

I believe that my vast experiences in the various facets of construction organization entitle me as the suitable candidate for this position. My academic qualification, exposures and experience have given me an in depth working knowledge in overall functions of the Construction Project Management.

An enthusiastic self-starter with strong leadership and communications skills. proven academic and curricular achievements, and possess the right technical and soft skills required to propel the organization achieving its goals and objectives.

Project Manager

LSIT, total 12 years of surveying

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

AutoCAD, Revit, 3D Animation

PLC programming,control design,piping,branch circuits.

Senior Instrumentation & Control Systems Engineer

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Erection & commissioning

mechanical engineer with 2.25 years experience in automotive field

Planning/scheduling, progress monitoring, procurement of project material, site coordination, progress reports and site co-ordination

QA/QC Engineer/Inspector

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.

KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si

Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects

•experience performing detailed design calculations for heat transfer systems, pressure vessels

I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh

15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar

Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project

Experience in quantity surveying, site supervision, planning, designing over water and over land structures.

I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.

Looking for a position with an established engineering company, utilizing previously learned skills

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

EXPERIENCE PROFILE (7 YEARS)

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out